0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
F3340

F3340

  • 厂商:

    ETC2

  • 封装:

  • 描述:

    F3340 - 5.0V HCMOS SMD OSCILLATOR - List of Unclassifed Manufacturers

  • 数据手册
  • 价格&库存
F3340 数据手册
5.0V HCMOS SMD OSCILLATOR MODEL: F3345 SERIES FEATURES • • • • 5.0V Operation HCMOS/TTL Output Tri-State Enable/Disable Tape and Reel (2,000 pcs. STD) OPTIONS • 1.05mm Height Max • Standby Function (F4101) Learn more about: Part Marking Identification Tape and Reel Specification Mechanical Specification Internet required • PART NUMBER SELECTION Learn More - Internet Required Part Number 092-Frequency-xxxxx 093-Frequency-xxxxx 090-Frequency-xxxxx 091-Frequency-xxxxx 094-Frequency-xxxxx 095-Frequency-xxxxx 096-Frequency-xxxxx Operating Model Frequency Number Stability1 Temperature (ºC) F3345 ±100PPM -10 ~ +70 -40 ~ +85 F3345R ±100PPM -10 ~ +70 F3340 ±50PPM -40 ~ +85 F3340R ±50PPM F3346 ±25PPM -10 ~ +70 -40 ~ +85 F3346R ±25PPM* -10 ~ +70 F3348 ±20PPM* Frequency Range (MHz) 1.000 ~ 80.000 1.000 ~ 80.000 1.000 ~ 80.000 1.000 ~ 80.000 1.000 ~ 80.000 1.000 ~ 80.000 1.000 ~ 80.000 • ELECTRICAL CHARACTERISTICS PARAMETERS Frequency Range (FO) Storage Temperature Range (TSTG) Supply Voltage (VDD) Input Current (IDD) 1.000 ~ 25.000 MHz 25.000+ ~ 50.000 MHz 50.000+ ~ 67.000 MHz 67.000+ ~ 80.000 MHz Output Symmetry (50% VDD) Rise Time (10% ~ 90% VDD) (TR) Fall Time (90% ~ 10% VDD) (TF) Output Voltage (VOL) (VOH) Output Current (IOL) (IOH) Output Load TTL HCMOS Start-up Time (TS) Enable/Disable Time 2 Maximum Soldering Temp / Time Moisture Sensitivity Level (MSL) Termination Finish 1 MAX (unless otherwise noted) 1.000 ~ 80.000 MHz -55ºC ~ +125ºC 5.0V ± 10% 25mA 40mA 60mA 73mA 45% ~ 55% 7nS 7nS 10% VDD 90% VDD Min 16mA Min -16mA Min 10TTL 50pF 10mS 100nS 260ºC / 10 Seconds 1 Au Inclusive of 25ºC tolerance, operating temperature range, input voltage change, load change, aging, shock, and vibration. *Excludes Shock/Vibration 2 An internal pullup resistor from pin 1 to pin 4 allows active output if pin 1 is left open. Note: A 0.01µF bypass capacitor should be placed between VDD (Pin 4) and GND (Pin 2) to minimize power supply line noise. All specifications subject to change without notice. Rev. 8/2/05 All dimensions are in millimeters. • ENABLE / DISABLE FUNCTION INH (Pin 1) OUTPUT (Pin 3) OPEN 2 ACTIVE '1' Level VIH ≥ 2.2 V ACTIVE '0' Level VIL ≤ 0.8 V High Z 66 FOXElectronics | 5570 Enterprise Parkway | Fort Myers, Florida 33905 | USA +1(239) 693.0099 | FAX +1 (239) 693.1554 Visit http://www.foxonline.com or Email us at http://www.foxonline.com/email.htm © 2005 Fox Electronics All rights reserved.
F3340 价格&库存

很抱歉,暂时无法提供与“F3340”相匹配的价格&库存,您可以联系我们找货

免费人工找货