FS6284

     X  T 'XDO 3// &ORFN *HQHUDWRU ,& $GYDQFH ,QIRUPDWLRQ )6 March 2000 1.0 • • • • Features 2.0 Description Dual phase-locked loop (PLL) device with three output clock frequencies 3.3V supply voltage Small circuit board footprint (8-pin 0.150″ SOIC) Custom frequency selections available - contact your local AMI Sales Representative for more information The FS6284 is a monolithic CMOS clock generator IC designed to minimize cost and component count in digital video/audio systems. All frequencies are ratiometrically derived from the crystal oscillator frequency. The locking of all the output frequencies together can eliminate unpredictable artifacts in video systems and reduce electromagnetic interference (EMI) due to frequency harmonic stacking. Figure 1: Pin Configuration SEL XIN XOUT VDD 1 8 Table 1: Crystal / Output Frequencies CLKA CLKB VSS CLKC FS6284-01 1 5 DEVICE SEL 0 fXIN (MHz) CLKA (MHz) CLKB (MHz) CLKC (MHz) FS6284 2 3 4 7 6 14.31818 81.000 (fXIN* 198 / 35) 14.31818 48.000 (fXIN) (fXIN* 352 / 105) 70.000 (fXIN* 44 / 9) NOTE: Contact AMI for custom PLL frequencies 8-pin (0.150″) SOIC Figure 2: Block Diagram XIN CRYSTAL OSC. XOUT PLL DIVIDER ARRAY CLKA CLKB PLL SEL CLKC FS6284 This document contains information on a preproduction product. Specifications and information herein are subject to change without notice. ,62 3.28.00 )6 'XDO 3// &ORFN *HQHUDWRU ,& $GYDQFH ,QIRUPDWLRQ Table 2: Pin Descriptions      X  T March 2000 Key: AI = Analog Input; AO = Analog Output; DI = Digital Input; DIU = Input with Internal Pull-Up; DID = Input with Internal Pull-Down; DIO = Digital Input/Output; DI-3 = Three-Level Digital Input, DO = Digital Output; P = Power/Ground; # = Active Low pin PIN 1 2 3 4 5 6 7 8 TYPE DI U NAME SEL XIN XOUT VDD CLKC VSS CLKB CLKA Select Input (see Table 1) DESCRIPTION AI AO P DO P DO DO Crystal Oscillator Drive / External Reference Input Crystal Oscillator Feedback Power (+3.3 volts) Clock Output C Ground Clock Output B Clock Output A 3.0 Electrical Specifications Table 3: Absolute Maximum Ratings Stresses above those listed under Absolute Maximum Ratings may cause permanent damage to the device. These conditions represent a stress rating only, and functional operation of the device at these or any other conditions above the operational limits noted in this specification is not implied. Exposure to maximum rating conditions for extended conditions may affect device performance, functionality, and reliability. PARAMETER Supply Voltage (VSS = ground) Input Voltage, dc Output Voltage, dc Input Clamp Current, dc (VI < 0 or VI > VDD) Output Clamp Current, dc (VI < 0 or VI > VDD) Storage Temperature Range (non-condensing) Ambient Temperature Range, Under Bias Junction Temperature Lead Temperature (soldering, 10s) Input Static Discharge Voltage Protection (MIL-STD 883E, Method 3015.7) SYMBOL VDD VI VO IIK IOK TS TA TJ MIN. VSS-0.5 VSS-0.5 VSS-0.5 -50 -50 -65 -55 MAX. 7 VDD+0.5 VDD+0.5 50 50 150 125 125 260 2 UNITS V V V mA mA °C °C °C °C kV CAUTION: ELECTROSTATIC SENSITIVE DEVICE Permanent damage resulting in a loss of functionality or performance may occur if this device is subjected to a high-energy electrostatic discharge. Table 4: Operating Conditions PARAMETER Supply Voltage Ambient Operating Temperature Range SYMBOL VDD TA CONDITIONS/DESCRIPTION 3.3V ± 10% MIN. 3.0 0 TYP. 3.3 MAX. 3.6 70 UNITS V °C ,62 2 3.28.00      X  T 'XDO 3// &ORFN *HQHUDWRU ,& $GYDQFH ,QIRUPDWLRQ )6 March 2000 4.0 Package Information Table 5: 8-pin SOIC (0.150") Package Dimensions DIMENSIONS INCHES MIN. A A1 A2 B C D E e H h L Θ 0.061 0.004 0.055 0.013 0.0075 0.189 0.150 0.230 0.010 0.016 0° MAX. 0.068 0.0098 0.061 0.019 0.0098 0.196 0.157 0.244 0.016 0.035 8° MILLIMETERS MIN. 1.55 0.102 1.40 0.33 0.191 4.80 3.81 5.84 0.25 0.41 0° MAX. 1.73 0.249 1.55 0.49 0.249 4.98 3.99 6.20 0.41 0.89 8° BASE PLANE 1 ALL RADII: 0.005" TO 0.01" R 8 E H ÅÉ"ÇÅÃÇ"#)#$É#ˆÃDŽ h x 45° B e A2 A D A1 SEATING PLANE 7° typ. 0.050 BSC 1.27 BSC C L θ Table 6: 8-pin SOIC (0.150") Package Characteristics PARAMETER Thermal Impedance, Junction to Free-Air 8-pin 0.150” SOIC Lead Inductance, Self Lead Inductance, Mutual Lead Capacitance, Bulk SYMBOL ΘJA L11 L12 C11 CONDITIONS/DESCRIPTION Air flow = 0 m/s Corner lead Center lead Any lead to any adjacent lead Any lead to VSS TYP. 110 2.0 1.6 0.4 0.27 UNITS °C/W nH nH pF ,62 3 3.28.00 )6 'XDO 3// &ORFN *HQHUDWRU ,& $GYDQFH ,QIRUPDWLRQ      X  T March 2000 5.0 Ordering Information DEVICE NUMBER PACKAGE TYPE 8-pin (0.150”) SOIC (Small Outline Package) 8-pin (0.150”) SOIC (Small Outline Package) OPERATING TEMPERATURE RANGE 0°C to 70°C (Commercial) 0°C to 70°C (Commercial) SHIPPING CONFIGURATION Tape and Reel Tubes ORDERING CODE 11640-xxx 11640-xxx FS6284-01 FS6284-01 Copyright © 2000 American Microsystems, Inc. Devices sold by AMI are covered by the warranty and patent indemnification provisions appearing in its Terms of Sale only. AMI makes no warranty, express, statutory implied or by description, regarding the information set forth herein or regarding the freedom of the described devices from patent infringement. AMI makes no warranty of merchantability or fitness for any purposes. AMI reserves the right to discontinue production and change specifications and prices at any time and without notice. AMI’s products are intended for use in commercial applications. Applications requiring extended temperature range, unusual environmental requirements, or high reliability applications, such as military, medical life-support or life-sustaining equipment, are specifically not recommended without additional processing by AMI for such applications. American Microsystems, Inc., 2300 Buckskin Rd., Pocatello, ID 83201, (208) 233-4690, FAX (208) 234-6796, WWW Address: http://www.amis.com E-mail: tgp@amis.com ,62 4 3.28.00