GJ1117AADJ

ISSUED DATE :2003/08/02 REVISED DATE :2006/12/14E G J 111 7 A Description 1A Low Dropout Positive Adjustable or Fixed-Mode Regulator The GJ1117A is a low dropout at positive adjustable or fixed-mode regulator with minimum of 1A output current capability. The product is specifically designed to provide well-regulated supply for low voltage IC applications such as high-speed bus termination and low current 3.3V logic supply. GJ1117A is also well suited for other applications such as VGA cards. GJ1117A is guaranteed to have lower than 1.4V dropout at full load current making it ideal to provide well-regulated outputs of 1.25 to 5.0 with 6.4V to 12V input supply. Features & 1.4Vmaximum dropout full load current &Fast transient response &Output current limiting &Built-in thermal shutdown &Good noise rejection &3-Terminal Adjustable or Fixed 1.5V,1.8V,2.5V,3.3V,5.0V Applications & peripheral PC &Communication Package Dimensions TO-252 REF. A B C D E F S Millimeter Min. Max. 6.40 6.80 5.20 5.50 6.80 7.20 2.40 3.00 2.30 REF. 0.70 0.90 0.60 0.90 REF. G H J K L M R Millimeter Min. Max. 0.50 0.70 2.20 2.40 0.45 0.55 0 0.15 0.90 1.50 5.40 5.80 0.80 1.20 Typical Circuit GJ1117A Page: 1/4 ISSUED DATE :2003/08/02 REVISED DATE :2006/12/14E Block Diagram Pin Descriptions Name Adj (GND) Vout Vin O I I/O Pin# 1 2 3 Function A resistor divider from this pin to the Vout pin and ground sets the output voltage (Ground only for fixed mode) The output of the regulator. A minimum of 10uF capacitor must be connected from this pin to ground to insure stability. The input pin of regulator. Typically a large storage capacitor is connected from this pin to ground to insure that the input voltage does not sag below the minimum dropout voltage during the load transient response. This pin must always be 1.3V higher than Vout in order for the device to regulate properly. Absolute Maximum Ratings Symbol Vin PD TST TOP TMJ DC Supply Voltage Power Dissipation Storage Temperature Operating Junction Temperature Range Maximum Junction Temperature Parameter Ratings -0.3 to 12 Internally Limited -65 ~ + 150 0 ~ + 125 150 : : : Unit V GJ1117A Page: 2/4 ISSUED DATE :2003/08/02 REVISED DATE :2006/12/14E Electrical Characteristics Parameter Reference Voltage GJ1117AADJ GJ1117A-1.5 GJ1117A-1.8 Output Voltage GJ1117A-2.5 GJ1117A-3.3 GJ1117A-5.0 Line Regulation GJ1117A-XXX GJ1117AADJ GJ1117A-1.5 Load Regulation GJ1117A-1.8 GJ1117A-2.5 GJ1117A-3.3 GJ1117A-5.0 Dropout Voltage (VIN-VOUT) Current Limit Minimum Load Current Adjust Pin Current Quiescent Current Thermal Regulation Ripple Rejection GJ1117A-XXX GJ1117A-XXX Adjustable model Adjustable model Conditions Io=10mA, Tj=25 : , (Vin-Vout )=1.5V Io=10mA, Tj=25 : , 3.0V Vin 12V Io=10mA, Tj=25 : , 3.3V Vin 12V Io=10mA, Tj=25 : , 4.0V Vin 12V Io=10mA, Tj=25 : , 4.8V Vin 12V Io=10mA, Tj=25 : , 6.5V Vin 12V Io=10mA, Vout+1.5V