GM862-GPS

wireless solutions solutions wireless solutions GM 862-GPS Modem SiRF Powered ® The new GM862-GPS module is at the cutting edge of the Telit product line. It combines a Quad-Band GSM/GPRS modem, with a 20 channel high sensitivity SiRFstarIII™ Single Chip GPS receiver. Based on the Pin-to-Pin compatibility of the GM862-GPS module to all previous versions, the functionality of existing and new applications can be extended by the latest state of the art GPS technology. With its ruggedized design, extended temperature range, integrated SIM-Card reader and industrial connectors, the Telit GM862-GPS is the perfect platform for all telematics applications, Fleet Management-, Tracking- and Security-devices and more. Additional features like Jamming Detection, integrated TCP/IP protocol stack, Easy Scan functionality and the direct support of an embedded camera offer extended functionality to the application at no additional cost. As a part of Telit’s corporate policy of environmental protection, all new Telit products comply to the RoHS (Restriction of Hazardous Substances) directive of the European Union (EU Directive 2002/95/EG). Product Features 20-channel High Sens. GPS receiver Pin to Pin Backw. compatible Quad Band RoHS Compliant SIM On Board SIM Holder Embedded TCP/IP Stack GPRS Class 10 ■ Quad-band EGSM 850 / 900 / 1800 / 1900 MHz Output Power Class 4 (2W) @ 850 / 900 MHz Class 1 (1W) @ 1800 / 1900 MHz Control via AT commands according to GSM 07.05, 07.07 and proprietary Telit Supply Voltage Range: 3,4 – 4,2 V DC (3,8 V DC recommended) GSM Power Consumption (typical values) - power off: ‹ 26 uA - Idle (registered, power saving): ‹ 4 mA - Dedicated mode: 170 mA - GPRS cl.10 (max): 500 m ■ ■ ■ Serial Port Multiplexer GSM 7.10 SIM Access Profile GPS Power Consumption: Stand-by current: 1 mA Operating current: 70 mA, including 20 mA for the antenna LNA Sensitivity: -107 dBm (typ.) @ 850 / 900 MHz -106 dBm (typ.) @ 1800 / 1900 MHz Dimensions: 43,9 x 43,9 x 6.9 mm Weight: 20 gr. Extended Temp. range: -30° / +80° C RoHS compliant TCP/IP stack access via AT commands PYTHON* Script Interpreter ■ ■ Embedded FTP and SMTP Client ■ ■ Extended Temperature Range ■ ■ ■ ■ ■ ■ Extended RF Sensitivity Making machines talk. GM 862-GPS Modem GPS Receiver ■ GPRS Data ■ ■ ■ ■ High sensitivity for indoor reception, up to -159 dBm Extremely fast TTFF’s at low signal levels Hot starts ‹ 2 seconds 200,000+ effective correlators Supports 20-Channel GPS GPS NMEA 0183 output format GPRS class 10 Mobile station class B Coding Scheme 1 to 4 PBCCH support ■ ■ ■ ■ ■ Fax ■ Group 3, Class 1 GSM Supplementary ■ ■ ■ ■ ■ ■ ■ Interfaces ■ ■ ■ ■ ■ ■ Call Forwarding Call Barring Call Waiting & Call Hold Advice of Charge Calling Line Identification Presentation (CLIP) Calling Line Identification Restriction (CLIR) Unstructured supplementary Services Mobile Originated Data (USSD) Closed User Group 50-pin board to board Molex connector 13 I/O ports max. Analog Audio (balanced and unbalanced) 1 A/D converter, Buzzer output Camera direct support mode on I/O ports ITU-T V.24 Serial Link through UART: at CMOS level Baud rate from 300 to 115.200 bps Autobauding from 2.400 to 57.600 bps 50 Ohm MMCX Antenna connector On board SIM holder, 1.8V / 3V with real-time detection ■ ■ ■ Additional Features ■ ■ ■ SIM Phonebook Fixed Dialling Number (FDN) Real Time Clock Alarm Management Battery Management Network LED support IRA character set Jamming Detection & Report Embedded TCP/IP stack, including TCP, IP, UDP, SMTP and FTP protocol Audio original size ■ ■ ■ ■ ■ ■ ■ ■ Telephony, Emergency Call Half rate, Full rate, Enhanced Full rate and Adaptive Multi Rate voice codecs (HR, FR, EFR, AMR) Superior Echo Cancellation & Noise Reduction Handset & Hands-free operations DTMF ■ is in it. ■ ■ Python* application resources ■ Approvals ■ ■ Fully type approved acording to R&TTE CE, GCF, FCC, PTCRB, IC ■ Python* script interpreter (allows driving the module »internally« implementing the application code directly in the Python* language) Memory: 3 MB of NV Memory for the user scripts and 1.5 MB RAM for the Python* engine usage Over-the-Air Application SW update IIC Bus and SPI Bus controlled in Python* SMS ■ Point-to-Point mobile originated and mobile terminated SMS Concatenated SMS supported SMS Cell Broadcast Text and PDU mode ■ ■ ■ ■ ■ Circuit Switched Data Transmission ■ Telit’s EASY ® features ■ Asynchronous Transparent Circuit Switched Data (CSD) up to 14,4 kbps Asynchronous Non-transparent CSD up to 9,6 kbps V.110 »EASY CAMERA« it provides the capability of a direct support of a VGA colour camera »EASY SCAN« automatic scan over GSM frequencies (also without SIM card) wireless solutions Telit Communications S.p.A. Via Stazione di Prosecco, 5/B I-34010 Sgonico (Trieste), Italy Tel +39 040 4192 200 Fax +39 040 4192 383 wireless E-Mail: modules@telit.com solutions www.telit.com ■ ■ ■ Order-No. GM862-GPS 3 990 250 657 Revision 02 [10.2006] Copyright © 2006, Telit Communications S.p.A. · Subject to changes in technology, design and availability * Copyright © 1991–1995 by Stichting Mathematisch Centrum, Amsterdam, The Netherlands; All Rights Reserved. Copyright © 1995–2001 Corporation for National Research Initiatives; All Rights Reserved. Copyright © 2001–2006 Python Software Foundation; All Rights Reserved. All Rights Reserved are retained in Python. wireless