GS71108AGP-8I

GS71108ATP/J/SJ/U SOJ, TSOP, FP-BGA Commercial Temp Industrial Temp Features • Fast access time: 7, 8, 10, 12 ns • CMOS low power operation: 140/120/95/80 mA at minimum cycle time • Single 3.3 V power supply • All inputs and outputs are TTL-compatible • Fully static operation • Industrial Temperature Option: –40° to 85°C • Package line up J: 400 mil, 32-pin SOJ package GJ : RoHS-compliant 400 mil, 32-pin SOJ package TP: 400 mil, 32-pin TSOP Type II package GP: RoHS-compliant 400 mil, 32-pin TSOP Type II package SJ: 300 mil, 32-pin SOJ package U: 6 mm x 8 mm Fine Pitch Ball Grid Array package GU: RoHS-compliant 6 mm x 8 mm Fine Pitch Ball Grid Array package 128K x 8 1Mb Asynchronous SRAM A3 A2 A1 A0 CE DQ1 DQ2 VDD VSS DQ3 DQ4 WE A16 A15 A14 A13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 7, 8, 10, 12 ns 3.3 V VDD Center VDD and VSS SOJ & TSOP-II 128K x 8-Pin Configuration 32 31 30 29 A4 A5 A6 A7 OE DQ8 DQ7 VSS VDD DQ6 DQ5 A8 A9 A10 A11 A12 32-pin 400 mil SOJ & 300 mil SOJ & 400 mil TSOP II 28 27 26 25 24 23 22 21 20 19 18 17 Description The GS71108A is a high speed CMOS Static RAM organized as 131,072 words by 8 bits. Static design eliminates the need for external clocks or timing strobes. The GS operates on a single 3.3 V power supply and all inputs and outputs are TTLcompatible. The GS71108A is available in a 6 mm x 8 mm Fine Pitch BGA package, as well as in 300 mil and 400 mil SOJ and 400 mil TSOP Type-II packages. Packages J, TP, and SJ Fine Pitch BGA 128K x 8-Bump Configuration 1 A B C NC DQ1 DQ2 VSS VDD DQ3 DQ4 NC 2 OE NC NC NC NC NC NC A10 3 A2 A1 A0 NC NC A14 A15 A16 4 A6 A5 A4 A3 NC A11 A12 A13 5 A7 CE NC NC NC DQ5 WE A9 6 NC DQ8 DQ7 VDD VSS DQ6 A8 NC Pin Descriptions Symbol A0–A16 DQ1–DQ8 CE WE OE VDD VSS NC D Description Address input Data input/output Chip enable input Write enable input Output enable input +3.3 V power supply Ground No connect E F G H Package U 6 mm x 8 mm, 0.75 mm Bump Pitch Top View Rev: 1.08 6/2006 1/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U Block Diagram A0 Address Input Buffer Row Decoder Memory Array A16 CE WE OE Column Decoder Control I/O Buffer DQ1 DQ8 Truth Table CE H L L L Note: X: “H” or “L” OE X L X H WE X H L H DQ1 to DQ8 Not Selected Read Write High Z VDD Current ISB1, ISB2 IDD Rev: 1.08 6/2006 2/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U Absolute Maximum Ratings Parameter Supply Voltage Input Voltage Output Voltage Allowable power dissipation Storage temperature Symbol VDD VIN VOUT PD TSTG Rating –0.5 to +4.6 –0.5 to VDD +0.5 (≤ 4.6 V max.) –0.5 to VDD +0.5 (≤ 4.6 V max.) 0.7 –55 to 150 Unit V V V W o C Note: Permanent device damage may occur if Absolute Maximum Ratings are exceeded. Functional operation shall be restricted to Recommended Operating Conditions. Exposure to higher than recommended voltages for extended periods of time could affect device reliability. Recommended Operating Conditions Parameter Supply Voltage for -7/-8/-10/-12 Input High Voltage Input Low Voltage Ambient Temperature, Commercial Range Ambient Temperature, Industrial Range Symbol VDD VIH VIL TAc TAI Min 3.0 2.0 –0.3 0 –40 Typ 3.3 — — — — Max 3.6 VDD +0.3 0.8 70 85 Unit V V V oC o C Notes: 1. Input overshoot voltage should be less than VDD +2 V and not exceed 20 ns. 2. Input undershoot voltage should be greater than –2 V and not exceed 20 ns. Rev: 1.08 6/2006 3/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U Capacitance Parameter Input Capacitance Output Capacitance Symbol CIN COUT Test Condition VIN = 0 V VOUT = 0 V Max 5 7 Unit pF pF Notes: 1. Tested at TA = 25°C, f = 1 MHz 2. These parameters are sampled and are not 100% tested. DC I/O Pin Characteristics Parameter Input Leakage Current Output Leakage Current Output High Voltage Output Low Voltage Symbol IIL ILO VOH VOL Test Conditions VIN = 0 to VDD Output High Z VOUT = 0 to VDD IOH = –4 mA ILO = +4 mA Min –1 uA –1 uA 2.4 — Max 1 uA 1 uA — 0.4 V Power Supply Currents Parameter Symbol Test Conditions CE ≤ VIL All other inputs ≥ VIH or ≤ VIL Min. cycle time IOUT = 0 mA CE ≥ VIH All other inputs ≥ VIH or ≤VIL Min. cycle time CE ≥ VDD – 0.2 V All other inputs ≥ VDD – 0.2 V or ≤ 0.2 V 0 to 70°C 7 ns 8 ns 10 ns 12 ns 7 ns –40 to 85°C 8 ns 10 ns 12 ns Operating Supply Current ID D 140 mA 120 mA 95 mA 80 mA 145 mA 125 mA 100 mA 85 mA Standby Current ISB1 25 mA 20 mA 20 mA 15 mA 30 mA 25 mA 25 mA 20 mA Standby Current ISB2 2 mA 5 mA Rev: 1.08 6/2006 4/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U AC Test Conditions Parameter Input high level Input low level Input rise time Input fall time Input reference level Output reference level Output load Conditions VIH = 2.4 V VIL = 0.4 V tr = 1 V/ns tf = 1 V/ns 1.4 V 1.4 V Fig. 1& 2 Output Load 1 DQ 50Ω VT = 1.4 V 30pF1 Output Load 2 3.3 V DQ 5pF1 589Ω 434Ω Notes: 1. Include scope and jig capacitance. 2. Test conditions as specified with output loading as shown in Fig. 1 unless otherwise noted. 3. Output load 2 for tLZ, tHZ, tOLZ and tOHZ AC Characteristics Read Cycle Parameter Read cycle time Address access time Chip enable access time (CE) Output enable to output valid (OE) Output hold from address change Chip enable to output in low Z (CE) Output enable to output in low Z (OE) Chip disable to output in High Z (CE) Output disable to output in High Z (OE) Symbol tRC tAA tAC tOE tOH tLZ* tOLZ* tHZ* tOHZ* -7 Min 7 — — — 3 3 0 — — Max — 7 7 3 — — — 3.5 3 Min 8 — — — 3 3 0 — — -8 Max — 8 8 3.5 — — — 4 3.5 Min 10 — — — 3 3 0 — — -10 Max — 10 10 4 — — — 5 4 Min 12 — — — 3 3 0 — — -12 Max — 12 12 5 — — — 6 5 Unit ns ns ns ns ns ns ns ns ns * These parameters are sampled and are not 100% tested Rev: 1.08 6/2006 5/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U Read Cycle 1: CE = OE = VIL, WE = VIH tRC Address tAA tOH Data Out Previous Data Data valid Read Cycle 2: WE = VIH tRC Address tAA CE tAC tLZ OE tOE Data Out tOLZ High impedance DATA VALID tHZ tOHZ Rev: 1.08 6/2006 6/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U Write Cycle Parameter Write cycle time Address valid to end of write Chip enable to end of write Data set up time Data hold time Write pulse width Address set up time Write recovery time (WE) Write recovery time (CE) Output Low Z from end of write Write to output in High Z Symbol tWC tAW tCW tDW tDH tWP tAS tWR tWR1 tWLZ* tWHZ* -7 Min 7 5 5 3 0 5 0 0 0 3 — Max — — — — — — — — — — 3 Min 8 5.5 5.5 4 0 5.5 0 0 0 3 — -8 Max — — — — — — — — — — 3.5 Min 10 7 7 5 0 7 0 0 0 3 — -10 Max — — — — — — — — — — 4 Min 12 8 8 6 0 8 0 0 0 3 — -12 Max — — — — — — — — — — 5 Unit ns ns ns ns ns ns ns ns ns ns ns * These parameters are sampled and are not 100% tested Write Cycle 1: WE control tWC Address tAW OE tCW CE tAS WE tDW Data In tWHZ Data Out HIGH IMPEDANCE DATA VALID tWR tWP tDH tWLZ Rev: 1.08 6/2006 7/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U Write Cycle 2: CE control tWC Address tAW OE tAS CE tWP WE tDW Data In Data Out DATA VALID tWR1 tCW tDH HIGH IMPEDANCE Rev: 1.08 6/2006 8/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U 32-Pin SOJ, 300 mil D L c E HE GE Symbol A A1 A2 B B1 c D Dimension in inch min 0.125 0.026 0.095 0.013 0.024 0.006 0.820 0.295 — 0.330 0.255 0.082 — 0o nom — — 0.100 0.017 0.028 0.008 0.825 0.300 0.05 0.335 0.267 — — — max 0.148 — 0.105 0.021 0.032 0.012 0.830 0.305 — 0.340 0.275 — 0.004 10o Dimension in mm min 3.175 0.66 2.41 0.33 0.61 0.15 20.82 7.49 — 8.38 6.48 2.08 — 0o nom — — 2.54 0.43 0.71 0.20 20.95 7.62 1.27 8.51 6.78 — — — max 3.76 — 2.67 0.53 0.81 0.30 21.08 7.75 — 8.64 6.958 — 0.10 10o 1 e A A A2 A1 y B B1 E e Detail A Q HE GE L y Q Notes: 1. Dimension D& E do not include interlead flash. 2. Dimension B1 does not include dambar protrusion/intrusion. 3. Controlling dimension: inches Rev: 1.08 6/2006 9/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U 32-Pin SOJ, 400 mil D L c E HE GE Symbol A A1 A2 B B1 c D Dimension in inch min — 0.026 0.105 0.013 0.024 0.006 0.820 0.395 — 0.430 0.354 0.082 — 0o nom — — 0.110 0.017 0.028 0.008 0.824 0.400 0.05 0.435 0.366 — — — max 0.146 — 0.115 0.021 0.032 0.012 0.829 0.405 — 0.440 0.378 — 0.004 10o Dimension in mm min — 0.66 2.67 0.33 0.61 0.15 20.83 10.04 — 10.93 9.00 2.08 — 0o nom — — 2.80 0.43 0.71 0.20 20.93 10.16 1.27 11.05 9.30 — — — max 3.70 — 2.92 0.53 0.81 0.30 21.06 10.28 — 11.17 9.60 — 0.10 10o 1 e A A A2 A1 y B B1 E e Detail A Q HE GE L y Q Notes: 1. Dimension D& E do not include interlead flash. 2. Dimension B1 does not include dambar protrusion/intrusion. 3. Controlling dimension: inches Rev: 1.08 6/2006 10/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U 32-Pin TSOP-II, 400mil D 32 c Symbol A E1 E A Dimension in inch min 0.039 0.002 0.037 0.012 0.0047 0.820 — 0.455 0.395 — 0.017 0.024 0.00 0 o Dimension in mm min — 0.01 0.90 0.30 0.12 20.82 — 11.56 10.03 — 0.40 0.60 0.00 0 o nom — — 0.040 0.016 0.0051 0.825 0.037 0.463 0.400 0.05 0.020 0.031 — — max 0.05 0.006 0.045 0.018 0.0062 0.830 — 0.471 0.405 — 0.023 0.039 0.003 5 o nom — — 1.02 0.40 0.13 20.95 0.95 11.76 10.16 1.27 0.50 0.80 — — max 1.27 0.15 1.14 0.45 0.16 21.08 — 11.96 10.29 — 0.60 1.00 0.76 5o A1 A2 b 1 ZD A A2 e b c D ZD E A1 y L1 L E1 e L L1 y Q Detail A Q Notes: 1. Dimension D includes mold flash, protrusions or gate burrs. 2. Dimension E does not include interlead flash 3. Controlling dimension: mm Rev: 1.08 6/2006 11/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U 6 mm x 8 mm Fine Pitch BGA 8.00 ± 0.10 6.00 ± 0.10 0.22 ± 0.05 3 2 1 6 0.75(typ). 12/16 Top View 1.20(max) pin A1 index Bottom View pin A1 index 5 4 Rev: 1.08 6/2006 Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. Ball Dia. 0.35 Pitch 0.75 © 2001, GSI Technology 3.75 5.25 0.36(typ) 0.10 G C D H A B E F D units: mm GS71108ATP/J/SJ/U Ordering Information Part Number* GS71108ATP-7 GS71108ATP-8 GS71108ATP-10 GS71108ATP-12 GS71108ATP-7I GS71108ATP-8I GS71108ATP-10I GS71108ATP-12I GS71108AGP-7 GS71108AGP-8 GS71108AGP-10 GS71108AGP-12 GS71108AGP-7I GS71108AGP-8I GS71108AGP-10I GS71108AGP-12I GS71108ASJ-7 GS71108ASJ-8 GS71108ASJ-10 GS71108ASJ-12 GS71108ASJ-7I GS71108ASJ-8I GS71108ASJ-10I GS71108ASJ-12I GS71108AJ-7 GS71108AJ-8 GS71108AJ-10 GS71108AJ-12 Package 400 mil TSOP-II 400 mil TSOP-II 400 mil TSOP-II 400 mil TSOP-II 400 mil TSOP-II 400 mil TSOP-II 400 mil TSOP-II 400 mil TSOP-II RoHS-compliant 400 mil TSOP-II RoHS-compliant 400 mil TSOP-II RoHS-compliant 400 mil TSOP-II RoHS-compliant 400 mil TSOP-II RoHS-compliant 400 mil TSOP-II RoHS-compliant 400 mil TSOP-II RoHS-compliant 400 mil TSOP-II RoHS-compliant 400 mil TSOP-II 300 mil SOJ 300 mil SOJ 300 mil SOJ 300 mil SOJ 300 mil SOJ 300 mil SOJ 300 mil SOJ 300 mil SOJ 400 mil SOJ 400 mil SOJ 400 mil SOJ 400 mil SOJ Access Time 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns Temp. Range Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Commercial Commercial Commercial Commercial Status MP MP MP MP MP MP MP MP PQ PQ PQ PQ PQ PQ PQ PQ MP MP MP MP MP MP MP MP MP MP MP MP Notes: 1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. For example: GS71108ATP-8T. 2. MP = Mass Production. PQ = Pre-Qualification. Rev: 1.08 6/2006 13/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U Ordering Information Part Number* GS71108AJ-7I GS71108AJ-8I GS71108AJ-10I GS71108AJ-12I GS71108AGJ-7 GS71108AGJ-8 GS71108AGJ-10 GS71108AGJ-12 GS71108AGJ-7I GS71108AGJ-8I GS71108AGJ-10I GS71108AGJ-12I GS71108AU-7 GS71108AU-8 GS71108AU-10 GS71108AU-12 GS71108AU-7I GS71108AU-8I GS71108AU-10I GS71108AU-12I GS71108AGU-7 GS71108AGU-8 GS71108AGU-10 GS71108AGU-12 GS71108AGU-7I GS71108AGU-8I GS71108AGU-10I GS71108AGU-12I Package 400 mil SOJ 400 mil SOJ 400 mil SOJ 400 mil SOJ RoHS-compliant 400 mil SOJ RoHS-compliant 400 mil SOJ RoHS-compliant 400 mil SOJ RoHS-compliant 400 mil SOJ RoHS-compliant 400 mil SOJ RoHS-compliant 400 mil SOJ RoHS-compliant 400 mil SOJ RoHS-compliant 400 mil SOJ 6 mm x 8 mm Fine Pitch BGA 6 mm x 8 mm Fine Pitch BGA 6 mm x 8 mm Fine Pitch BGA 6 mm x 8 mm Fine Pitch BGA 6 mm x 8 mm Fine Pitch BGA 6 mm x 8 mm Fine Pitch BGA 6 mm x 8 mm Fine Pitch BGA 6 mm x 8 mm Fine Pitch BGA RoHS-compliant 6 mm x 8 mm Fine Pitch BGA RoHS-compliant 6 mm x 8 mm Fine Pitch BGA RoHS-compliant 6 mm x 8 mm Fine Pitch BGA RoHS-compliant 6 mm x 8 mm Fine Pitch BGA RoHS-compliant 6 mm x 8 mm Fine Pitch BGA RoHS-compliant 6 mm x 8 mm Fine Pitch BGA RoHS-compliant 6 mm x 8 mm Fine Pitch BGA RoHS-compliant 6 mm x 8 mm Fine Pitch BGA Access Time 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns 7 ns 8 ns 10 ns 12 ns Temp. Range Industrial Industrial Industrial Industrial Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Commercial Commercial Commercial Commercial Industrial Industrial Industrial Industrial Status MP MP MP MP PQ PQ PQ PQ PQ PQ PQ PQ MP MP MP MP MP MP MP MP PQ PQ PQ PQ PQ PQ PQ PQ Notes: 1. Customers requiring delivery in Tape and Reel should add the character “T” to the end of the part number. For example: GS71108ATP-8T. 2. MP = Mass Production. PQ = Pre-Qualification. Rev: 1.08 6/2006 14/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U Rev: 1.08 6/2006 15/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com. GS71108ATP/J/SJ/U 1Mb Asynchronous Datasheet Revision History Rev. Code: Old; New 71108A_r1 71108A_r1; 71108A_r1_01 71108A_r1_01; 71108A _r1_02 71108A_r1_02; 71108A _r1_03 71108A_r1_03; 71108A _r1_04 71108A_r1_04; 71108A _r1_05 71108A_r1_05; 71108A _r1_06 71108A_r1_06; 71108A _r1_07 71108A_r1_07; 71108A _r1_08 Content Content Content Content Content Content Content Content Types of Changes Format or Content Page #/Revisions/Reason • Creation of new datasheet • Added 6 ns speed bin to entire document • Updated all power numbers • Changed 6 mm x 10 mm package designator from U to X • Updated Recommended Operating Conditions table on page 3 • Updated Power Supply Currents table • Changed FPBGA package from 6 x 10 to 6 x 8 (package U) • Removed 6 ns speed bin from entire document • Added 7 ns speed bin to entire document • Added missing 300 mil SOJ mechanical drawing • Updated format • Added RoHS-compliant information for TSOP-II package • Added RoHS-compliant information for FP-BGA package • Added RoHS-compliant 400 mil, 32-pin SOJ Rev: 1.08 6/2006 16/16 © 2001, GSI Technology Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com.