GTR-2215C

1X9 Series 155Mbps Bi-Directional transmission GTR-221X Bi-Directional 1X9 Transceiver Features Transmitter and receiver in one device SC/FC receptacle bi-directional single fiber 155Mbps data rate A type: 1310nmFPTx/1550nmRx B type: 1550nmFP laser transmitter Class laser product compiles with IEC 60825-1 3.3V/ 5V power supply LVPECL/PECL signal input and output Operating Case Temperature Standard: 0 ~+70 Industrial:-40 ~+85 DFB Tx/1310nmRx Applications WDM Application SDH STM-1/ SONET OC-3 Product Description The GTR-221X optical transceiver is designed for use in155Mbps data links. It provide the SC/FC optical receptacle that is compatible with the industry standard connector. Both the transmitter and the receiver are packaged together with a top plastic cover and bottom shield. The transceiver operates with 3.3V/5V DC power supply. Eoptolink Technology Inc., Ltd. Last printed 2/14/2008 Page 1 of 8 1X9 Series Feature Electrostatic Discharge (ESD) to the Electrical Pins Electromagnetic Interference (EMI) Laser Eye Safety Component Recognition Green Products 155Mbps Bi-Directional transmission Regulatory Compliance Standard MIL-STD-883E Method 3015.7 FCC Part 15 Class B FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 UL and CUL RoHS Performance Class 1(>500 V) Compatible with standards Compatible with Class I laser product. Compatible with TÜV standards UL file E317337 RoHS6 *Note: Products compliant with UL file E317337 use EOL9 series Part NO. Absolute Maximum Ratings Parameter Storage Temperature Supply Voltage Operating Relative Humidity Soldering Conditions Temp/Time Symbol TS VCC Min. -40 -0.5 Max. +85 6.0 95 260/10 Unit ° C V % ° C/s Recommended Operating Conditions Parameter Operating Case Temperature Power Supply Voltage Power Supply Current Data Rate Symbol Min. Typical Max. TA VCC ICC 0 -40 4.75 5 60 155 +70 +85 5.25 100 Unit ºC V mA Mbps Optical and Electrical Characteristic Parameter Symbol Min. Typical 1310 1550 Max. 1360 1580 4 1 Unit Transmitter 1260 C 1480 Centre Wavelength Spectral Width FP DFB ¬ ³ nm nm Eoptolink Technology Inc., Ltd. Last printed 2/14/2008 Page 2 of 8 1X9 Series TYPE A Average Output Power TYPE B Average Output Power 20Km 40Km 60Km 20Km FP 40Km DFB 60Km DFB 155Mbps Bi-Directional transmission P0ut -14 -10 -5 -14 -10 -5 EX tr/tf Vin Zin VH VL 500 90 VCC-1165 VCC-1810 100 10 0.5 1600 110 VCC-880 VCC1475 -8 -5 0 -8 -5 0 dB ns mV dBm P0ut dBm Extinction Ratio Rise/Fall Time (20%---80%) Data Input Swing Differential Input Differential Impedance Input High Voltage Input Low Voltage Eye Diagram Data Input ¡ mV mV Compliant with ITU-T G.957 LVPECL/PECL Receiver 155 Mbps 1550 1310 1580 1360 -34 -3 -35 -40 0.5 VCC-1165 VCC-1810 LVPECL/PECL VCC-880 VCC1475 nm dBm dBm dBm dBm dB mV mV Receiver Rate Centre Wavelength Receiver Sensitivity Receiver Overload SD Assert SD De-Assert SD Hysteresis Output High Voltage Output Low Voltage Data Output ¬ C 1480 1260 Pmin Pmax SDA SDD VH VL Eoptolink Technology Inc., Ltd. Last printed 2/14/2008 Page 3 of 8 1X9 Series Pin Description Pin Name 1 2 3 VEER RD+ RDLevel 155Mbps Bi-Directional transmission Description 4 SD 5 VccR 6 7 8 9 VccR TDTD+ VEET Receiver Signal Ground, connect to receiver signal ground plane directly Receiver Data Out, Terminate this pin with standard LVPECL/PECL LVPECL/PECL techniques Receiver Data Out, Terminate this pin with standard LVPECL/PECL LVPECL/PECL techniques Signal Detect, LVTTL/TTL ( Load resistor > 4.7K )or LVPECL/PECL output, Normal optical input levels to the receiver result in a LVPECL/PECL logic “1” output, asserted. Low input levels to the receiver result in a fault condition indicated by a logic “0”output, deasserted. Receiver Power Supply ,provide +5V(+3.3V) a the recommended receiver power supply filter circuit. Locate the power filter circuit as close as possible to the VCCT pin Transmitter Power Supply, provide +3.3V /+5V DC via the recommended transmitter power supply filter circuit. Locate the power filter circuit as close as possible to the VCCT pin PECL Transmitter Data in ¡ PECL Transmitter Data in Transmitter Signal Ground, connect to the transmitter signal ground planed directly Eoptolink Technology Inc., Ltd. Last printed 2/14/2008 Page 4 of 8 1X9 Series Pin Definitions 155Mbps Bi-Directional transmission Recommended Circuit DC-COUPLING Eoptolink Technology Inc., Ltd. Last printed 2/14/2008 Page 5 of 8 ¢ ¢ ¢ ¢ ! $% "# '' '' ! $% "# ''' ''' ' ' &% " ' ' &% " ' ' ¡   ¢ 1X9 Series SC receptacle 155Mbps Bi-Directional transmission Package outline ( unit: mm) Eoptolink Technology Inc., Ltd. Last printed 2/14/2008 Page 6 of 8 1X9 Series FC receptacle 155Mbps Bi-Directional transmission Ordering information Part No. GTR-2212(A)(B)(C) GTR-2213(A)(B)(C) GTR-2214(A)(B)(C) GTR-2215(A)(B)(C) GTR-2216(A)(B)(C) GTR-2217(A)(B)(C) GTR-2218(A)(B)(C) GTR-2219(A)(B)(C) Data Rate Laser 1310nmFPT/1550nmR 1550nmFPT/1310nmR 1310nmFPT/1550nmR 1550nmDFB/1310nmR 1310nmFPT/1550nmR 1550nmDFBT/1310nmR 1310nmFPT/1550nmR 1550nmDFBT/1310nmR Fiber Type Distance 20Km 20Km 40Km 40Km 60Km 60Km 80Km 80Km Optical Interface 155M SMF SC/FC *A may be F, E, blank (F--FC, E--ST, blank--SC) *B may be I (I--- Industrial operating temperature) *C may be V, H, blank (V--3.3v, H--5V, blank--3.3v/5v) Eoptolink Technology Inc., Ltd. Last printed 2/14/2008 Page 7 of 8 1X9 Series NOTICE: 155Mbps Bi-Directional transmission Eoptolink reserves the right to make changes to or discontinue any optical link product or service identified in this publication, without notice, in order to improve design and/or performance. Applications that are described herein for any of the optical link products are for illustrative purposes only. Eoptolink makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. CONTACT: Add: Floor 5, Building 2, No. 21 Gaopeng Avenue, High-Tech District, Chengdu City. Tel: (+86) 028-85122709 (+86) 028-85124308 (+86) 028-85124306 Fax: (+86) 028-85121912 Postal: 610041 E-mail:sales@eoptolink.com http://www.eoptolink.com ext 816 & 809 ext 816 & 809 ext 816 & 809 (+86) 028-85121709 ext 816 & 809 Eoptolink Technology Inc., Ltd. Last printed 2/14/2008 Page 8 of 8