HLWW-L51A

Specification No. Date SPECIFICATIONS 5Φ White LED LAMP MODEL : HLWW- L51A Designed by Checked by Approved by ROITHNER LASERTECHNIK VIENNA AUSTRIA www.roithner-laser.com office@roithner-laser.com MODEL : HLWW-L51A 1. Features 1-1. InGaN Blue Chip 1-2. 5mm all epoxy resin mold type 1-3. Colorless Cylinder type LED lamp 1-4. Ultra luminous intensity 2. Application 2-1. LED Display / Traffic Guiding Signal 2-2. Illumination device 2-3. Back Light for Signboard 1-4. Ultra luminous intensity 3. Absolute maximum ratings and Characteristics 3 - 1 Absolute maximum ratings Items Forward Current Pulse Forward Current *1 Power Dissipation Reverse Voltage Operating Temperature Storage Temperature Soldering Temperature *2 Symbols IF IFP PD VR Topr Tstg TSOL Ratings 30 50 75 5 -20 ~ +75 -30 ~ +100 260±5℃ Ta=25℃ Units mA mA mW Vr ℃ ℃ ℃ *1) Pulse Width = 100 μ sec, Duty ≤ 10% *2 ) 5sec at location 3.0mm away from the base of the epoxy bulb 3 - 2 Optical and Electrical Characteristics Item Forward Voltage Reverse Current Luminous Intensity Chromaticity Coordinates Spectral Linewidth Viewing Angle Symbol VF IR IV λd Δλ 2Θ1/2 Condition IF=20[mA] VR=5[V] IF=20[mA] IF=20[mA] IF=20[mA] IF=20[mA] Min 3600 Typ 3.4 4200 X=0.30 Y=0.31 17 15 Max 4.0 10 - Ta=25℃ Unit V ㎂ mcd nm deg Data subject to change. MODEL : HLWW-L51A 4. Dimension 2.54 5.45±0.2 Max.2.35 Not Soldered Φ 5.0±0.2 Φ 5.9±0.2 20.5±0.1 Min.25.4 2Max.0.7 1.0±0.2 8.6±0.2 0.5±0.1 (2.54) 1 1 : ANODE 2 2 : CATHODE General TOL.:±0.3 5. Bin Grading for Chromaticity Coordinates RANK A X Y B C X Y X Y D *Tolerance Data subject to change. Chromaticity Coordinates 0.220 0.220 0.260 0.250 0.290 0.270 0.320 0.290 X±0.02 0.220 0.280 0.260 0.310 0.290 0.330 0.320 0.350 0.260 0.310 0.290 0.330 0.320 0.350 0.360 0.380 Y±0.02 0.260 0.250 0.290 0.270 0.320 0.290 0.360 0.320 X Y Min.1.0 MODEL : HLWW-L51A 6. Typical Electro-optical characteristics curve ■ Lead Temperature vs. Relative Luminosity Relative Luminous Intensity[a.u.] ■Forward Voltage vs. Forward Current 100 1 Forward Current[mA] 0 20 40 60 80 100 10 0.1 -20 1 1.0 2.0 3.0 4.0 5.0 Lead Temperature[℃] Forward Voltage[V] ■ Luminous Spectrum 100 Spectrum Radius ■Ambient Temperature vs. Forward Current 40 RELATIVE RESPONSE 100%=1,642e-001 80 30 60 Forward Current[mA] 20 40 20 10 0 400 500 600 700 nm 0 0 -20 0 20 40 60 80 Ambient Temperature[℃] 30 ■ Spatial Distribution - 30 - 60 60 - 90 1 0.5 0 0.5 1 90 Data subject to change. MODEL : HLWW-L51A 7. Inspection Standards 7 - 1 In production line, 100% inspection for electro-optical characteristics should be done on following 3 items. - VF , IR , Iv 7 - 2 Outgoing inspection be done to the standards as below. - MIL-STD-104D, S-3, AQL 1.0% - Items: VF, IR, Iv, λp 8. Packing Standards In one vinyl pack, 200 LEDs are inserted. Or user’s request. In one small box, 10 packs(total 2000 LEDs) are inserted. Or user’s request. 9. Caution on usage 9 - 1 Be careful never to exceed , even momentarily, the absolute maximum ratings specified in the data sheet. 9 - 2 We will not be held responsible for any damage to the user that may result from accidents or any other reasons during operation of the user such as use in excess of the absolute maximum ratings, or not keeping the matters that demand special attention. 9 - 3 Store and use where there is no corrosive gas. 9 - 4 The bending or cutting of the lead should be done in room temperature and no force applied on the package. Data subject to change. Copyright ⓒ 2002