KC7783R

RoHS Compliant KC7783R PIR Module Low Cost version This is a low cost version of the PIR module. It is designed for cost sensitive consumer product. Except the IC package format, all the mechanical and electrical spec is same as KC7783. Features: IC soft package by dice bonding technique Small size: 25 x 35mm Ball lens is included as standard configuration 3 leads flat cable for easy connection 4 mounting holes on board High Sensitivity High immunity to RFI Power up delay to prevent from false triggering Output High for direct connect to control panel Specification Min Typ Max Operation Voltage 4.7 5 12 Standby Current ( no load) 300 Output Pulse Width 0.5 Output High Voltage 5 Detection Range 5 Operation Temperature -20 25 50 Humidity Range 95 Note: 1. All other features and specification, please refer to KC778B 2. Minimum output pulse width can be customer specified. Standard Configuration PIR controller KC778B in dice form PIR Sensor RE200B by NICERA Lens Ball lens of 60o detection angle Connector 3 leads flat cable, Power, GND, O/P 3.7 Unit V µA Sec V M o C % Lens Dimension (unit in mm) 24 24 R12 Mechanical Dimension Vertical View Pattern 30o 20o 19.5 25 O/P V+ GND 60o 2M 30 35 70 1 2 3 4 5 (M) Application Note: 1. The PIR sensor is sensitive to the temperature change and therefore to prevent from operating the module in rapid environmental temperature changes, strong shock or vibration. Don't expose to the direct sun light or headlights of automobile. Don't expose to direct wind from heater or air conditioner. 2. This module is designed for indoor use. If using in outdoor, make sure to apply suitable supplemental optical filter and drop-proof, anti-dew construction 3. Detection range might be varied in different environmental temperature condition.