BCcomponents
DATA SHEET
KP/MKP 375 AC and Pulse metallized polypropylene film capacitors
Product specification Supersedes data of April 1999 File under BCcomponents, BC05 2000 Feb 01
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP RADIAL LACQUERED TYPE
KP/MKP 375
PITCH 10/15/22.5/27.5 mm PITCH 7.5 mm (bent back leads)
296x12(full_width)
P(bent back leads) = 7.5 mm
P = 10 mm
P = 15 - 22.5 -27.5 mm
CBA951
Fig.1 Simplified outline.
FEATURES • 10 to 27.5 mm lead pitch • Supplied loose and taped • Taped products available on request. APPLICATIONS • Where high currents and steep pulses occur • For deflection circuits in television receivers. DETAIL SPECIFICATION For more detailed data and test requirements see “Type detail specification HQN-384-17/104”.
QUICK REFERENCE DATA DESCRIPTION Capacitance range (E24 series) 100 pF to 270 nF Capacitance tolerance Rated (DC) voltage Rated (AC) voltage Rated peak-to-peak voltage Climatic category Maximum application temperature Rated temperature Reference specification Performance grade: for C > 5.6 nF and 2500 V for C ≤ 5.6 nF Stability grade grade 1 (long life) grade 2 (general purpose) grade 2 ±5%; ±3.5% 630 V; 1000 V; 1600 V; 2000 V; 2500 V 300 V; 400 V; 500 V; 600 V; 880 V 850 V; 1100 V; 1400 V; 1700 V; 2500 V 55/105/56 105 °C 85 °C IEC 60384-17 VALUE
2000 Feb 01
2
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 15.0/7.5 mm 10.0 mm 375 15.0 mm 22.5 mm 27.5 mm CAPACITANCE (numerically)
KP/MKP 375
MULTIPLIER (nF) 0.01 0.1 1 10 1 2 3 4
Example: 104 = 10 x 10 = 100 nF
2222
375 XX XX X
TYPE
PACKAGING
LEAD CONFIGURATION
C-TOL
630 V
1000 V
1600 V
1600 V monitor type
lead length 5.0 mm loose in box lead length 3.5 mm 375 taped on reel taped on reel (bent back) H = 16.0 mm; P0 = 12.7 mm H = 16.0 mm; P0 = 15.0 mm
±5% ±3.5% ±5% ±3.5% ±5% ±3.5% ±5% ±3.5%
14 15 10 11 12 13 16 17
24 25 20 21 22 23 26 27
34 35 30 31 32 33 36 37
64 65 60 61 62 63 66 67
2000 Feb 01
3
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375
TYPE AND PITCHES 15.0/7.5 mm 10.0 mm 375 15.0 mm 22.5 mm 27.5 mm CAPACITANCE (numerically)
MULTIPLIER (nF) 0.01 0.1 1 10 1 2 3 4
Example: 104 = 10 x 10 = 100 nF
2222
375 XX XX X
TYPE
PACKAGING
LEAD CONFIGURATION
C-TOL
2000 V
2000 V monitor type
2500 V
2500 V monitor type
lead length 5.0 mm loose in box lead length 3.5 mm 375 taped on reel taped on reel (bent back) H = 16.0 mm; P0 = 12.7 mm H = 16.0 mm; P0 = 15.0 mm
±5% ±3.5% ±5% ±3.5% ±5% ±3.5% ±5% ±3.5%
44 45 40 41 42 43 46 47
74 75 70 71 72 73 − −
91 91 91 91 − − − −
84 85 80 81 82 83 − −
2000 Feb 01
4
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
l b
KP/MKP 375
PITCH 10 mm
296x12(full_width)
h seating plane (1)
α
(2) lt
P
(1) Hole ∅1.0 for dt = 0.6 mm. (2) 0 ≤ α < 50°
A
Ødt
CBA070
Fig.4 Outline.
Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 14... 2222 375 15... 2222 375 10... 2222 375 11... 2222 375 12... 2222 375 13... ORDERING preferred on request on request on request on request on request VALUE at 10 kHz ≤6 × 10−4 at 100 kHz ≤10 × 10−4
15000 V/µs >100000 MΩ >100000 MΩ >400 V 1008 V; 1 minute 2840 V; 1 minute
2000 Feb 01
5
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 630 V; URac = 300 V/Up-p = 850 V
KP/MKP 375
CATALOGUE NUMBER(1) C (pF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX lt = 5.0 ±1.0 mm C-tol = ±5% Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm; A = 2.0 +1.0/−0.5 mm 680 750 820 910 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 Note 1. The shading indicates preferred types. 6.5 × 14.5 × 14.5 6.0 × 14.0 × 14.5 5.5 × 13.5 × 14.5 5.0 × 13.0 × 14.5 0.65 0.65 0.70 0.70 0.70 0.75 0.75 0.75 0.80 0.85 0.80 0.85 0.90 1.0 1.1 2222 375 14681 2222 375 14751 2222 375 14821 2222 375 14911 2222 375 14102 2222 375 14112 2222 375 14122 2222 375 14132 2222 375 14152 2222 375 14162 2222 375 14182 2222 375 14202 2222 375 14222 2222 375 14242 2222 375 14272
2000 Feb 01
6
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
KP/MKP 375
PITCH 15 mm PITCH 7.5 mm (bent back leads)
296x12(full_width)
l
b
l
b
seating plane (1) α (2)
h F' lt 10 (3) F
h'
H Ødt
CBA818
P
A
Ødt 15
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°. (3) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm
Fig.5 Outline.
Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Taped on reel (bent back) Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 H = 16.0 mm; P0 = 15.0 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 14... 2222 375 15... 2222 375 10... 2222 375 11... 2222 375 12... 2222 375 13... 2222 375 16... 2222 375 17... ORDERING preferred on request on request on request on request on request preferred on request VALUE at 10 kHz ≤6 × 10−4 at 100 kHz ≤10 × 10−4
8000 V/µs >100000 MΩ >100000 MΩ >400 V 1008 V; 1 minute 2840 V; 1 minute
2000 Feb 01
7
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 630 V; URac = 300 V/Up-p = 850 V
KP/MKP 375
CATALOGUE NUMBER C (pF) DIMENSIONS(1) bmax × h (h’)max × lmax (mm) LOOSE IN BOX MASS (g) lt = 5.0 ±1.0 mm C-tol = ±5% catalogue 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 10000 11000 12000 13000 15000 16000 18000 20000 22000 24000 27000 30000 33000 36000 39000 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. number(3) REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) pitch 7.5 mm (bent back) C-tol = ±5% last 5 digits(3) .. 16302 .. 16332 .. 16362 .. 16392 .. 16432 .. 16472 .. 16512 .. 16562 .. 16622 .. 16682 .. 16752 .. 16822 .. 16912 .. 16103 .. 16113 .. 16123 .. 16133 .. 16153 .. 16163 .. 16183 .. 16203 .. 16223 .. 16243 .. 16273 .. 16303 .. 16333 on request
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.5/−0.5 mm 5.0 × 14.0 (15.5) × 18.5 1.0 2222 375 14302 2222 375 14332 2222 375 14362 2222 375 14392 2222 375 14432 2222 375 14472 2222 375 14512 2222 375 14562 2222 375 14622 2222 375 14682 2222 375 14752 2222 375 14822 2222 375 14912 2222 375 14103 2222 375 14113 2222 375 14123 2222 375 14133 2222 375 14153 2222 375 14163 2222 375 14183 2222 375 14203 2222 375 14223 2222 375 14243 2222 375 14273 2222 375 14303 2222 375 14333 on request
5.5 × 14.5 (16.0) × 18.5
1.1
6.0 × 15.0 (16.5) × 18.5
1.2
6.5 × 15.5 (17.0) × 18.5 7.0 × 16.0 (17.5) × 18.5 7.5 × 16.5 (18.0) × 18.5 8.0 × 17.0 (18.5) × 18.5 8.5 × 17.5 (19.0) × 18.5 9.5 × 18.5 (20.0) × 18.5
1.3 1.5 1.6 1.9 2.0 2.3
2000 Feb 01
8
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
l b
KP/MKP 375
PITCH 22.5/27.5 mm
296x12(full_width)
h seating plane (1)
α
(2) lt
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°
A
Ødt
CBA070
Fig.6 Outline.
Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 630 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 14... 2222 375 15... 2222 375 10... 2222 375 11... 2222 375 12... 2222 375 13... ORDERING preferred on request on request on request on request on request VALUE at 10 kHz ≤8 × 10−4 ≤8 × 10−4 at 100 kHz ≤15 × 10−4 ≤20 × 10−4
2800 V/µs 1900 V/µs >100000 MΩ >100000 MΩ >400 V 1008 V; 1 minute 2840 V; 1 minute
2000 Feb 01
9
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 630 V; URac = 300 V/Up-p = 850 V
KP/MKP 375
CATALOGUE NUMBER(1) C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX lt = 5.0 ±1.0 mm C-tol = ±5% Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.036 0.039 0.043 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 7.5 × 20.5 × 26.0 8.0 × 21.0 × 26.0 8.5 × 21.5 × 26.0 9.0 × 22.0 × 26.0 9.5 × 22.5 × 26.0 10.0 × 23.0 × 26.0 9.5 × 22.5 × 30.0 10.0 × 23.0 × 30.0 10.5 × 23.5 × 30.0 11.0 × 24.0 × 30.0 11.5 × 24.5 × 30.0 12.5 × 25.5 × 30.0 13.0 × 26.0 × 30.0 13.5 × 26.5 × 30.0 3.0 3.3 3.8 4.0 4.3 4.7 7.0 × 20.0 × 26.0 2.7 2222 375 14363 2222 375 14393 2222 375 14433 2222 375 14473 2222 375 14513 2222 375 14563 2222 375 14623 2222 375 14683 2222 375 14753 2222 375 14823 2222 375 14913 2222 375 14104 2222 375 14114 2222 375 14124
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.13 0.15 0.16 0.18 0.2 0.22 0.24 0.27 Note 1. The shading indicates preferred types. 4.7 5.2 5.5 6.0 6.6 7.1 7.7 8.5 2222 375 14134 2222 375 14154 2222 375 14164 2222 375 14184 2222 375 14204 2222 375 14224 2222 375 14244 2222 375 14274
2000 Feb 01
10
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
l b
KP/MKP 375
PITCH 10 mm
296x12(full_width)
h seating plane (1)
α
(2) lt
P
(1) Hole ∅1.0 for dt = 0.6 mm. (2) 0 ≤ α < 50°
A
Ødt
CBA070
Fig.7 Outline.
Specific reference data for the 1000 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 1000 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 1000 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5±0.5 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 24... 2222 375 25... 2222 375 20... 2222 375 21... 2222 375 22... 2222 375 23... ORDERING preferred on request on request on request on request on request VALUE at 10 kHz ≤6 × 10−4 at 100 kHz ≤10 × 10−4
27000 V/µs >100000 MΩ >100000 MΩ >500 V 1600 V; 1 minute 2840 V; 1 minute
2000 Feb 01
11
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 1000 V; URac = 400 V/Up-p = 1100 V
KP/MKP 375
CATALOGUE NUMBER(1) C (pF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX lt = 5.0 ±1.0 mm C-tol = ±5% Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm; A = 2.0 +1.0/−0.5 mm 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 1100 1200 1300 1500 Note 1. The shading indicates preferred types. 6.0 × 14.0 × 14.5 5.5 × 13.5 × 14.5 0.55 0.55 0.55 0.55 0.60 0.60 0.60 0.60 0.60 0.60 0.65 0.70 0.75 0.75 0.80 0.80 0.80 0.70 0.70 0.70 0.75 0.85 0.90 0.85 0.90 5.0 × 13.0 × 14.5 0.50 2222 375 24101 2222 375 24111 2222 375 24121 2222 375 24131 2222 375 24151 2222 375 24161 2222 375 24181 2222 375 24201 2222 375 24221 2222 375 24241 2222 375 24271 2222 375 24301 2222 375 24331 2222 375 24361 2222 375 24391 2222 375 24431 2222 375 24471 2222 375 24511 2222 375 24561 2222 375 24621 2222 375 24681 2222 375 24751 2222 375 24821 2222 375 24911 2222 375 24102 2222 375 24112 2222 375 24122 2222 375 24132 2222 375 24152
2000 Feb 01
12
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
KP/MKP 375
PITCH 15 mm PITCH 7.5 mm (bent back leads)
296x12(full_width)
l
b
l
b
seating plane (1) α (2)
h F' lt 10 (3) F
h'
H Ødt
CBA818
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°. (3) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm
A
Ødt 15
Fig.8 Outline.
Specific reference data for the 1000 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 1000 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 1000 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5±0.5 mm Taped on reel Taped on reel (bent back) Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 H = 16.0 mm; P0 = 15.0 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 24... 2222 375 25... 2222 375 20... 2222 375 21... 2222 375 22... 2222 375 23... 2222 375 26... 2222 375 27... ORDERING preferred on request on request on request on request on request preferred on request VALUE at 10 kHz ≤6 × 10−4 at 100 kHz ≤10 × 10−4
15000 V/µs >100000 MΩ >100000 MΩ >500 V 1600 V; 1 minute 2840 V; 1 minute
2000 Feb 01
13
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 1000 V; URac = 400 V/Up-p = 1100 V
KP/MKP 375
CATALOGUE NUMBER LOOSE IN BOX C (pF) DIMENSIONS(1) bmax × h (h’)max × lmax (mm) MASS (g) lt = 5.0 ±1.0 mm C-tol = ±5% catalogue number(3) REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) pitch 7.5 mm (bent back) C-tol = ±5% last 5 digits(3)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.5/−0.5 mm 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 4700 5100 5600 6200 6800 7500 8200 9100 10000 11000 12000 13000 15000 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 7.5 × 16.5 (18.0) × 18.5 8.0 × 17.0 (18.5) × 18.5 8.5 × 17.5 (19.0) × 18.5 9.0 × 18.0 (19.5) × 18.5 1.6 1.8 1.9 2.1 7.0 × 16.0 (17.5) × 18.5 1.4 6.0 × 15.0 (16.5) × 18.5 1.2 5.5 × 14.5 (16.0) × 18.5 1.1 2222 375 24162 2222 375 24182 2222 375 24202 2222 375 24222 2222 375 24242 2222 375 24272 2222 375 24302 2222 375 24332 2222 375 24362 2222 375 24392 2222 375 24432 2222 375 24472 2222 375 24512 2222 375 24562 2222 375 24622 2222 375 24682 2222 375 24752 2222 375 24822 2222 375 24912 2222 375 24103 2222 375 24113 2222 375 24123 2222 375 24133 2222 375 24153 .. 26162 .. 26182 .. 26202 .. 26222 .. 26242 .. 26272 .. 26302 .. 26332 .. 26362 .. 26392 .. 26432 .. 26472 .. 26512 .. 26562 .. 26622 .. 26682 .. 26752 .. 26822 .. 26912 .. 26103 .. 26113 .. 26123 .. 26133 .. 26153
2000 Feb 01
14
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
296x12(full_width) l b
KP/MKP 375
PITCH 22.5/27.5 mm
h seating plane (1)
α
(2) lt
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°
A
Ødt
CBA070
Fig.9 Outline.
Specific reference data for the 1000 V DC capacitors DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 1000 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 50 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s for C ≤ 47 nF for C > 47 nF Withstanding (DC) voltage between leads and case Available 1000 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5±0.5 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 24... 2222 375 25... 2222 375 20... 2222 375 21... 2222 375 22... 2222 375 23... ORDERING preferred on request on request on request on request on request VALUE at 10 kHz ≤6 × 10−4 ≤6 × 10−4 5000 V/µs 3300 V/µs >100000 MΩ >100000 MΩ >500 V 1600 V; 1 minute [ 1, 6 – ( 0, 0364 ⋅ C – 47 ) ] × 1000V ; 1 minute 2840 V; 1 minute at 100 kHz ≤10 × 10−4 ≤15 × 10−4
2000 Feb 01
15
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 1000 V; URac = 400 V/Up-p = 1100 V
KP/MKP 375
CATALOGUE NUMBER(1) C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX lt = 5.0 ±1.0 mm C-tol = ±5% Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.016 0.018 0.02 0.022 0.024 0.027 0.03 0.033 0.036 0.039 0.043 6.0 × 19.0 × 26.0 6.5 × 19.5 × 26.0 7.0 × 20.0 × 26.0 7.5 × 20.5 × 26.0 8.0 × 21.0 × 26.0 8.5 × 21.5 × 26.0 9.0 × 22.0 × 26.0 7.0 × 20.0 × 30.0 7.5 × 20.5 × 30.0 8.0 × 21.0 × 30.0 8.5 × 21.5 × 30.0 9.0 × 22.0 × 30.0 9.5 × 22.5 × 30.0 10.0 × 23.0 × 30.0 10.5 × 23.5 × 30.0 11.0 × 24.0 × 30.0 11.5 × 24.5 × 30.0 12.0 × 25.0 × 30.0 12.5 × 25.5 × 30.0 2.2 2.5 2.7 3.1 3.4 3.7 4.1 2222 375 24163 2222 375 24183 2222 375 24203 2222 375 24223 2222 375 24243 2222 375 24273 2222 375 24303 2222 375 24333 2222 375 24363 2222 375 24393 2222 375 24433
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.047 0.051 0.056 0.062 0.068 0.075 0.082 0.091 0.1 0.11 0.12 0.13 0.15 Note 1. The shading indicates preferred types. 3.1 3.4 3.8 4.0 4.4 4.7 5.1 5.5 5.9 6.3 6.8 7.6 2222 375 24473 2222 375 24513 2222 375 24563 2222 375 24623 2222 375 24683 2222 375 24753 2222 375 24823 2222 375 24913 2222 375 24104 2222 375 24114 2222 375 24124 2222 375 24134 2222 375 24154
2000 Feb 01
16
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
KP/MKP 375
PITCH 15 mm PITCH 7.5 mm (bent back leads)
296x12(full_width)
l
b
l
b
seating plane (1) α (2)
h F' lt 10 (3) F
h'
H Ødt
CBA818
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°. (3) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm
A
Ødt 15
Fig.10 Outline.
Specific reference data for the 1600 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 1600 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 1600 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Taped on reel (bent back) Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 H = 16.0 mm; P0 = 15.0 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 34... 2222 375 35... 2222 375 30... 2222 375 31... 2222 375 32... 2222 375 33... 2222 375 36... 2222 375 37... ORDERING preferred on request on request on request on request on request preferred on request VALUE at 10 kHz ≤6 × 10−4 at 100 kHz ≤10 × 10−4
21000 V/µs >100000 MΩ >100000 MΩ >550 V 2560 V; 1 minute 2840 V; 1 minute
2000 Feb 01
17
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 1600 V; URac = 500 V/Up-p = 1400 V
KP/MKP 375
CATALOGUE NUMBER LOOSE IN BOX C (pF) DIMENSIONS(1) bmax × h (h’)max × lmax (mm) MASS (g) lt = 5.0 ±1.0 mm C-tol = ±5% catalogue number(3) REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) pitch 7.5 mm (bent back) C-tol = ±5% last 5 digits(3)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.5/−0.5 mm 680 750 820 910 1000 1100 1200 1300 1500 1600 1800 2000 2200 2400 2700 3000 3300 3600 3900 4300 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 5.5 × 14.5 (16.0) × 18.5 6.0 × 15.0 (16.5) × 18.5 6.5 × 15.5 (17.0) × 18.5 7.0 × 16.0 (17.5) × 18.5 7.5 × 16.5 (18.0) × 18.5 8.0 × 17.0 (18.5) × 18.5 8.5 × 17.5 (19.0) × 18.5 9.0 × 18.0 (19.5) × 18.5 6.0 × 15.0 (15.5) × 18.5 0.80 0.85 0.85 0.90 0.95 1.1 1.2 1.3 1.4 1.6 1.7 1.8 2.0 5.5 × 14.5 (15.0) × 18.5 0.75 2222 375 34681 2222 375 34751 2222 375 34821 2222 375 34911 2222 375 34102 2222 375 34112 2222 375 34122 2222 375 34132 2222 375 34152 2222 375 34162 2222 375 34182 2222 375 34202 2222 375 34222 2222 375 34242 2222 375 34272 2222 375 34302 2222 375 34332 2222 375 34362 2222 375 34392 2222 375 34432 .. 36681 .. 36751 .. 36821 .. 36911 .. 36102 .. 36112 .. 36122 .. 36132 .. 36152 .. 36162 .. 36182 .. 36202 .. 36222 .. 36242 .. 36272 .. 36302 .. 36332 .. 36362 .. 36392 .. 36432
2000 Feb 01
18
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
296x12(full_width) l b
KP/MKP 375
PITCH 22.5/27.5 mm
h seating plane (1)
α
(2) lt
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°
A
Ødt
CBA070
Fig.11 Outline.
Specific reference data for the 1600 V DC capacitors DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 1600 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 1600 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 34... 2222 375 35... 2222 375 30... 2222 375 31... 2222 375 32... 2222 375 33... ORDERING preferred on request on request on request on request on request VALUE at 10 kHz ≤6 × 10−4 ≤6 × 10−4 at 100 kHz ≤10 × 10−4 ≤15 × 10−4
7000 V/µs 4700 V/µs >100000 MΩ >100000 MΩ >550 V 2560 V; 1 minute 2840 V; 1 minute
2000 Feb 01
19
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 1600 V; URac = 500 V/Up-p = 1400 V
KP/MKP 375
CATALOGUE NUMBER(1) C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX lt = 5.0 ±1.0 mm C-tol = ±5% Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 0.0091 0.01 0.011 0.012 0.013 0.015 0.016 0.018 6.5 × 19.5 × 26.0 7.0 × 20.0 × 26.0 7.5 × 20.5 × 26.0 8.0 × 21.0 × 26.0 8.5 × 21.5 × 26.0 9.0 × 22.0 × 26.0 9.5 × 22.5 × 26.0 10.0 × 23.0 × 26.0 10.5 × 23.5 × 26.0 9.0 × 22.0 × 30.0 9.5 × 22.5 × 30.0 10.0 × 23.0 × 30.0 10.5 × 23.5 × 30.0 11.0 × 24.0 × 30.0 11.5 × 24.5 × 30.0 12.0 × 25.0 × 30.0 12.5 × 25.5 × 30.0 2.1 2.3 2.5 2.6 2.9 3.1 3.5 3.6 4.0 6.0 × 19.0 × 26.0 2.0 2222 375 34472 2222 375 34512 2222 375 34562 2222 375 34622 2222 375 34682 2222 375 34752 2222 375 34822 2222 375 34912 2222 375 34103 2222 375 34113 2222 375 34123 2222 375 34133 2222 375 34153 2222 375 34163 2222 375 34183
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.02 0.022 0.024 0.027 0.03 0.033 0.036 0.039 Note 1. The shading indicates preferred types. 4.2 4.4 4.7 5.2 5.6 6.0 6.5 6.9 2222 375 34203 2222 375 34223 2222 375 34243 2222 375 34273 2222 375 34303 2222 375 34333 2222 375 34363 2222 375 34393
2000 Feb 01
20
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
KP/MKP 375
PITCH 15 mm PITCH 7.5 mm (bent back leads)
296x12(full_width)
l
b
l
b
seating plane (1) α (2)
h F' lt 10 (3) F
h'
H Ødt
CBA818
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°. (3) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm
A
Ødt 15
Fig.12 Outline.
Specific reference data for the 1600 V DC capacitors (monitor type) DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 1600 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 1600 V DC versions (monitor type) PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Taped on reel (bent back) Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 H = 16.0 mm; P0 = 15.0 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 64... 2222 375 65... 2222 375 60... 2222 375 61... 2222 375 62... 2222 375 63... 2222 375 66... 2222 375 67... ORDERING preferred on request on request on request on request on request preferred on request VALUE at 10 kHz ≤6 × 10−4 at 100 kHz ≤10 × 10−4
21000 V/µs >100000 MΩ >100000 MΩ >550 V 2560 V; 1 minute 2840 V; 1 minute
2000 Feb 01
21
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 1600 V; URac = 500 V/Up-p = 1400 V (monitor type)
KP/MKP 375
CATALOGUE NUMBER LOOSE IN BOX C (pF) DIMENSIONS(1) bmax × h (h’)max × lmax (mm) MASS (g) lt = 5.0 ±1.0 mm C-tol = ±5% catalogue number(3) REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) pitch 7.5 mm (bent back) C-tol = ±5% last 5 digits(3)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.5/−0.5 mm 1000 1100 1200 1300 1500 1600 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 7.5 × 16.5 (18.0) × 18.5 8.0 × 17.0 (18.5) × 18.5 8.5 × 17.5 (19.0) × 18.5 9.0 × 18.0 (19.5) × 18.5 9.5 × 18.5 (20.0) × 18.5 1.6 1.7 1.8 2.0 2.3 2222 375 64102 2222 375 64112 2222 375 64122 2222 375 64132 2222 375 64152 2222 375 64162 .. 66102 .. 66112 .. 66122 .. 66132 .. 66152 .. 66162
2000 Feb 01
22
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
l b
KP/MKP 375
PITCH 22.5/27.5 mm
296x12(full_width)
h seating plane (1)
α
(2) lt
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°
A
Ødt
CBA070
Fig.13 Outline.
Specific reference data for the 1600 V DC capacitors (monitor type) DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 1600 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 1600 V DC versions (monitor type) PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 64... 2222 375 65... 2222 375 60... 2222 375 61... 2222 375 62... 2222 375 63... ORDERING preferred on request on request on request on request on request VALUE at 10 kHz ≤6 × 10−4 ≤6 × 10−4 at 100 kHz ≤10 × 10−4 ≤15 × 10−4
7000 V/µs 4700 V/µs >100000 MΩ >100000 MΩ >550 V 2560 V; 1 minute 2840 V; 1 minute
2000 Feb 01
23
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 1600 V; URac = 500 V/Up-p = 1400 V (monitor type)
KP/MKP 375
CATALOGUE NUMBER(1) C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX lt = 5.0 ±1.0 mm C-tol = ±5% Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.0018 0.002 0.0022 0.0024 0.0027 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 0.0091 0.01 0.011 0.012 0.013 0.015 0.016 0.018 0.02 0.022 0.024 0.027 0.03 0.033 0.036 0.039 Note 1. The shading indicates preferred types. 6.0 × 19.0 × 26.0 6.5 × 19.5 × 26.0 7.0 × 20.0 × 26.0 7.5 × 20.5 × 26.0 8.0 × 21.0 × 26.0 2.0 2.1 2.3 2.5 2.6 2222 375 64182 2222 375 64202 2222 375 64222 2222 375 64242 2222 375 64272 2222 375 64302 2222 375 64332 2222 375 64362 2222 375 64392 2222 375 64432 2222 375 64472 2222 375 64512 2222 375 64562 2222 375 64622 2222 375 64682 2222 375 64752 2222 375 64822 2222 375 64912 2222 375 64103 2222 375 64113 2222 375 64123 2222 375 64133 2222 375 64153 2222 375 64163 2222 375 64183 2222 375 64203 2222 375 64223 2222 375 64243 2222 375 64273 2222 375 64303 2222 375 64333 2222 375 64363 2222 375 64393
8.5 × 21.5 × 26.0 9.0 × 22.0 × 26.0 9.5 × 22.5 × 26.0 10.0 × 23.0 × 26.0 10.5 × 23.5 × 26.0 10.0 × 23.0 × 30.0 10.5 × 23.5 × 30.0 11.0 × 24.0 × 30.0 11.5 × 24.5 × 30.0 12.0 × 25.0 × 30.0 13.0 × 26.0 × 30.0 13.5 × 26.5 × 30.0 14.5 × 27.5 × 30.0
2.9
3.1 3.5 3.6 4.0 4.7 5.2 5.6 6.0 6.5 6.9 7.3 7.8
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm
15.0 × 29.0 × 30.0
8.2
2000 Feb 01
24
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
KP/MKP 375
PITCH 15 mm PITCH 7.5 mm (bent back leads)
296x12(full_width)
l
b
l
b
seating plane (1) α (2)
h F' lt 10 (3) F
h'
H Ødt
CBA818
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°. (3) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm
A
Ødt 15
Fig.14 Outline.
Specific reference data for the 2000 V DC capacitors DESCRIPTION Tangent of loss angle Rated voltage pulse slope (dU/dt)R at 2000 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 2000 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Taped on reel (bent back) Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 H = 16.0 mm; P0 = 15.0 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 44... 2222 375 45... 2222 375 40... 2222 375 41... 2222 375 42... 2222 375 43... 2222 375 46... 2222 375 47... ORDERING preferred on request on request on request on request on request preferred on request VALUE at 10 kHz ≤6 × 10−4 at 100 kHz ≤10 × 10−4
30000 V/µs >100000 MΩ >100000 MΩ >600 V 3200 V; 1 minute 2840 V; 1 minute
2000 Feb 01
25
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 2000 V; URac = 600 V/Up-p = 1700 V
KP/MKP 375
C (pF)
DIMENSIONS(1) bmax × h (h’)max × lmax (mm)
MASS (g)
CATALOGUE NUMBER LOOSE IN BOX REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) lt = 5.0 ±1.0 mm C-tol = ±5% catalogue number(3) pitch 7.5 mm (bent back) C-tol = ±5% last 5 digits(3)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 100 0.75 2222 375 44101 .. 46101 110 0.75 2222 375 44111 .. 46111 120 0.75 2222 375 44121 .. 46121 130 0.75 2222 375 44131 .. 46131 150 0.75 2222 375 44151 .. 46151 160 0.75 2222 375 44161 .. 46161 180 0.75 2222 375 44181 .. 46181 200 0.75 2222 375 44201 .. 46201 220 0.75 2222 375 44221 .. 46221 5.5 × 14.5 (15.0) × 18.5 240 0.75 2222 375 44241 .. 46241 270 0.75 2222 375 44271 .. 46271 300 0.75 2222 375 44301 .. 46301 330 0.75 2222 375 44331 .. 46331 360 0.75 2222 375 44361 .. 46361 390 0.75 2222 375 44391 .. 46391 430 0.75 2222 375 44431 .. 46431 470 0.80 2222 375 44471 .. 46471 510 0.80 2222 375 44511 .. 46511 560 0.80 2222 375 44561 .. 46561 620 0.85 2222 375 44621 .. 46621 680 0.85 2222 375 44681 .. 46681 6.0 × 15.0 (15.5) × 18.5 750 0.90 2222 375 44751 .. 46751 820 6.5 × 15.5 (16.0) × 18.5 0.95 2222 375 44821 .. 46821 910 5.5 × 14.5 (16.0) × 18.5 1.1 2222 375 44911 .. 46911 2222 375 44102 .. 46102 1000 1100 2222 375 44112 .. 46112 6.0 × 15.0 (16.5) × 18.5 1.2 2222 375 44122 .. 46122 1200 1300 6.5 × 15.5 (17.0) × 18.5 1.3 2222 375 44132 .. 46132 2222 375 44152 .. 46152 1500 7.0 × 16.0 (17.5) × 18.5 1.4 1600 2222 375 44162 .. 46162 7.5 × 16.5 (18.0) × 18.5 1.5 2222 375 44182 .. 46182 1800 2000 8.0 × 17.0 (18.5) × 18.5 1.6 2222 375 44202 .. 46202 2222 375 44222 .. 46222 2200 8.5 × 17.5 (19.0) × 18.5 1.7 2400 9.0 × 18.0 (19.5) × 18.5 1.8 2222 375 44242 .. 46242 2222 375 44272 .. 46272 2700 9.5 × 18.5 (20.0) × 18.5 2.0 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 2000 Feb 01 26
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
l b
KP/MKP 375
PITCH 22.5/27.5 mm
296x12(full_width)
h seating plane (1)
α
(2) lt
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°
A
Ødt
CBA070
Fig.15 Outline.
Specific reference data for the 2000 V DC capacitors DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 2000 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 2000 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 44... 2222 375 45... 2222 375 40... 2222 375 41... 2222 375 42... 2222 375 43... ORDERING preferred on request on request on request on request on request VALUE at 10 kHz ≤6 × 10−4 ≤6 × 10−4 at 100 kHz ≤10 × 10−4 ≤15 × 10−4
10000 V/µs 6700 V/µs >100000 MΩ >100000 MΩ >600 V 3200 V; 1 minute 2840 V; 1 minute
2000 Feb 01
27
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 2000 V; URac = 600 V/Up-p = 1700 V
KP/MKP 375
CATALOGUE NUMBER(1) C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX lt = 5.0 ±1.0 mm C-tol = ±5% Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 0.0091 0.01 6.5 × 19.5 × 26.0 7.0 × 20.0 × 26.0 7.5 × 20.5 × 26.0 8.0 × 21.0 × 26.0 8.5 × 21.5 × 26.0 9.0 × 22.0 × 26.0 9.5 × 22.5 × 26.0 9.0 × 22.0 × 30.0 9.5 × 22.5 × 30.0 10.0 × 23.0 × 30.0 10.5 × 23.5 × 30.0 11.0 × 24.0 × 30.0 11.5 × 24.5 × 30.0 12.5 × 25.5 × 30.0 13.0 × 26.0 × 30.0 2.3 2.6 2.8 3.0 3.3 3.6 3.8 6.0 × 19.0 × 26.0 2.1 2222 375 44302 2222 375 44332 2222 375 44362 2222 375 44392 2222 375 44432 2222 375 44472 2222 375 44512 2222 375 44562 2222 375 44622 2222 375 44682 2222 375 44752 2222 375 44822 2222 375 44912 2222 375 44103
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.011 0.012 0.013 0.015 0.016 0.018 0.02 0.022 Note 1. The shading indicates preferred types. 3.8 4.1 4.4 4.9 5.1 5.6 6.1 6.5 2222 375 44113 2222 375 44123 2222 375 44133 2222 375 44153 2222 375 44163 2222 375 44183 2222 375 44203 2222 375 44223
2000 Feb 01
28
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
296x12(full_width) l b
KP/MKP 375
PITCH 22.5/27.5 mm
h seating plane (1)
α
(2) lt
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°
A
Ødt
CBA070
Fig.16 Outline.
Specific reference data for the 2000 V DC capacitors (monitor type) DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 2000 V (DC): P = 22.5 mm P = 27.5 mm R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 2000 V DC versions (monitor type) PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 74... 2222 375 75... 2222 375 70... 2222 375 71... 2222 375 72... 2222 375 73... ORDERING preferred on request on request on request on request on request VALUE at 10 kHz ≤6 × 10−4 ≤6 × 10−4 at 100 kHz ≤10 × 10−4 ≤15 × 10−4
10000 V/µs 6700 V/µs >100000 MΩ >100000 MΩ >600 V 3200 V; 1 minute 2840 V; 1 minute
2000 Feb 01
29
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 2000 V; URac = 600 V/Up-p = 1700 V (monitor type)
KP/MKP 375
CATALOGUE NUMBER(1) C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX lt = 5.0 ±1.0 mm C-tol = ±5% Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.001 0.0011 0.0012 0.0013 0.0015 0.0016 0.0018 0.002 0.0022 0.0024 0.0027 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 11.5 × 24.5 × 26.0 5.3 11.0 × 24.0 × 26.0 4.9 6.0 × 19.0 × 26.0 6.5 × 19.5 × 26.0 7.0 × 20.0 × 26.0 7.5 × 20.5 × 26.0 8.0 × 21.0 × 26.0 8.5 × 21.5 × 26.0 9.0 × 22.0 × 26.0 9.5 × 22.5 × 26.0 10.0 × 23.0 × 26.0 10.5 × 23.5 × 26.0 2.1 2.3 2.6 2.8 3.0 3.3 3.6 3.8 4.2 4.5 2222 375 74102 2222 375 74112 2222 375 74122 2222 375 74132 2222 375 74152 2222 375 74162 2222 375 74182 2222 375 74202 2222 375 74222 2222 375 74242 2222 375 74272 2222 375 74302 2222 375 74332 2222 375 74362 2222 375 74392 2222 375 74432 2222 375 74472 2222 375 74512
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.0056 0.0062 0.0068 0.0075 0.0082 0.0091 0.01 0.011 0.012 0.013 0.015 Note 1. The shading indicates preferred types. 15.5 × 29.5 × 30.0 8.1 11.0 × 24.0 × 30.0 11.5 × 24.5 × 30.0 12.0 × 25.0 × 30.0 12.5 × 25.5 × 30.0 13.0 × 26.0 × 30.0 14.0 × 27.0 × 30.0 14.5 × 27.5 × 30.0 5.1 5.6 5.8 6.1 6.5 7.0 7.5 2222 375 74562 2222 375 74622 2222 375 74682 2222 375 74752 2222 375 74822 2222 375 74912 2222 375 74103 2222 375 74113 2222 375 74123 2222 375 74133 2222 375 74153
2000 Feb 01
30
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
l b
KP/MKP 375
PITCH 22.5 (bent back leads) /27.5 mm
l b
144x12(halfpage)
144x12(halfpage)
seating plane (1) h (2) α
seating plane (1) (2) α
h
lt
lt
P A Ødt
CBA628
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°
A
Ødt
CBA632
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°
Fig.17 Outline for pitch = 22.5 mm (bent back leads).
Fig.18 Outline for pitch = 27.5 mm.
Specific reference data for the 2500 V DC capacitors DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 2500 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 2500 V DC versions PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. 2000 Feb 01 31 H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 91... 2222 375 91... 2222 375 91... 2222 375 91... 2222 375 ..... 2222 375 ..... ORDERING on request on request on request on request on request on request VALUE at 10 kHz ≤6 × 10−4 ≤6 × 10−4 at 100 kHz ≤10 × 10−4 ≤10 × 10−4
18000 V/µs >100000 MΩ >100000 MΩ >900 V 3500 V; 1 minute 2840 V; 1 minute
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 2500 V; URac = 880 V/Up-p = 2500 V
KP/MKP 375
CATALOGUE NUMBER C (µF) DIMENSIONS bmax × hmax × lmax (mm) LOOSE IN BOX; lt = 3.5 ±0.5 mm MASS (g) P = 22.5 ±0.4 mm(1) C-tol = ±5% catalogue number dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.001 0.0011 0.0012 0.0013 0.0015 0.0016 0.0018 0.0020 0.0022 0.0024 0.0025 0.0027 0.0030 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 Note 1. Only for bent back leads. 8.5 × 21.5 × 30.0 9.0 × 22.0 × 30.0 9.5 × 22.5 × 30.0 10.0 × 23.0 × 30.0 10.5 × 23.5 × 30.0 11.0 × 24.0 × 30.0 11.5 × 24.5 × 30.0 12.0 × 25.0 × 30.0 12.5 × 25.5 × 30.0 13.5 × 26.5 × 30.0 14.0 × 27.5 × 30.0 3.5 3.8 4.0 4.3 4.6 5.0 5.3 5.7 6.1 6.6 7.2 8.0 × 21.0 × 30.0 3.2 7.5 × 20.5 × 30.0 2.9 7.0 × 20.0 × 30.0 2.9 2222 375 91001 2222 375 91005 2222 375 91011 2222 375 91015 2222 375 91021 2222 375 91025 2222 375 91031 2222 375 91035 2222 375 91041 2222 375 91045 2222 375 91051 2222 375 91055 2222 375 91061 2222 375 91065 2222 375 91071 2222 375 91075 2222 375 91081 2222 375 91085 2222 375 91091 2222 375 91095 2222 375 91101 2222 375 91105 .. 91003 .. 91007 .. 91013 .. 91017 .. 91023 .. 91027 .. 91033 .. 91037 .. 91043 .. 91047 .. 91053 .. 91057 .. 91063 .. 91067 .. 91073 .. 91077 .. 91083 .. 91087 .. 91093 .. 91097 .. 91103 .. 91107 last 5 digits P = 27.5 ±0.4 mm
2000 Feb 01
32
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375 GENERAL DATA
KP/MKP 375
PITCH 22.5/27.5 mm
296x12(full_width)
l
b
h seating plane (1)
α
(2) lt
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°
A
Ødt
CBA070
Fig.19 Outline.
Specific reference data for the 2500 V DC capacitors (monitor type) DESCRIPTION Tangent of loss angle: P = 22.5 mm P = 27.5 mm Rated voltage pulse slope (dU/dt)R at 2500 V (DC) R between leads at 500 V; 1 minute R between interconnected leads and case; 500 V; 1 minute Ionization (AC) voltage (typical value) at 20 pC peak discharge Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 2500 V DC versions (monitor type) PACKAGING(1) DIMENSIONS lt = 5.0 ±1.0 mm Loose in box lt = 3.5 ±0.5 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 2 C-tol ±5% ±3.5% ±5% ±3.5% ±5% ±3.5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 375 84... 2222 375 85... 2222 375 80... 2222 375 81... 2222 375 82... 2222 375 83... ORDERING preferred on request on request on request on request on request VALUE at 10 kHz ≤6 × 10−4 ≤6 × 10−4 at 100 kHz ≤10 × 10−4 ≤15 × 10−4
18000 V/µs >100000 MΩ >100000 MΩ >900 V 3500 V; 1 minute 2840 V; 1 minute
2000 Feb 01
33
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
URdc = 2500 V; URac = 600 V/Up-p = 1700 V (monitor type)
KP/MKP 375
CATALOGUE NUMBER(1) C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX lt = 5.0 ±1.0 mm C-tol = ±5% Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.001 0.0011 0.0012 0.0013 0.0015 0.0016 0.0018 0.002 0.0022 0.0024 0.0027 7.0 × 20.0 × 26.0 7.5 × 20.5 × 26.0 8.5 × 21.5 × 26.0 9.0 × 22.0 × 26.0 9.5 × 22.5 × 26.0 10.0 × 23.0 × 26.0 10.5 × 23.5 × 26.0 11.0 × 24.0 × 26.0 11.0 × 24.0 × 30.0 11.5 × 24.5 × 30.0 12.0 × 25.0 × 30.0 12.5 × 25.5 × 30.0 13.0 × 26.0 × 30.0 13.5 × 26.5 × 30.0 14.0 × 27.0 × 30.0 15.0 × 29.0 × 30.0 2.6 2.8 3.3 3.6 3.8 4.1 4.5 4.9 2222 375 84102 2222 375 84112 2222 375 84122 2222 375 84132 2222 375 84152 2222 375 84162 2222 375 84182 2222 375 84202 2222 375 84222 2222 375 84242 2222 375 84272
Pitch = 27.5 ±0.5 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.003 0.0033 0.0036 0.0039 0.0043 0.0047 0.0051 0.0056 0.0062 0.0068 0.0075 0.0082 0.0091 Note 1. The shading indicates preferred types. 15.5 × 29.5 × 30.0 8.2 5.1 5.4 5.8 6.1 6.5 6.9 7.3 7.8 2222 375 84302 2222 375 84332 2222 375 84362 2222 375 84392 2222 375 84432 2222 375 84472 2222 375 84512 2222 375 84562 2222 375 84622 2222 375 84682 2222 375 84752 2222 375 84822 2222 375 84912
2000 Feb 01
34
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
CONSTRUCTION Description • Series-constructed, impregnated polypropylene film, aluminium foil and metallized internal electrode • Protected by a hard, water-repellent, solvent-resistant epoxy lacquer • Radial leads, solder-coated: – Copper clad steel wire for original pitch = 10 mm – Copper wire for original pitch = 15, 22.5 and 27.5 mm. FOR KP/MKP 630 V - 2000 V AND 2500 V (MONITOR TYPE)
metal spray layer 144x12(halfpage) aluminium foil
KP/MKP 375
Mounting NORMAL USE The capacitors are designed for printed-circuit boards applications. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter “Packaging information”. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
AND SHOCK
• For pitches of ≤15 mm capacitors shall be mechanically fixed by the leads. • For larger pitches the capacitors shall be mounted in the same way and the body clamped. Storage temperature • Storage temperature: Tstg = −25 to +40 °C with RH maximum 80% without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 ±1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ±2%. For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%.
polypropylene film metallized polypropylene film connecting wire KP/MKP
CBA282
Fig.20 Construction.
FOR KP/MKP 2500 V (2222 375 91...)
Aluminium foil 144x12(halfpage)
polypropylene film MKP metallized polypropylene film metal spray layer connecting wire
CBA283
Fig.21 Construction.
2000 Feb 01
35
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
CHARACTERISTICS Capacitance
KP/MKP 375
CBA829
296x12(full_width) 8 ∆C/C (%) 4
0
max. typical
-4
min.
-8
-50
0
50
Tamb (°C)
100
Fig.22 Capacitance change as a function of ambient temperature.
Impedance
296x12(full_width) 10 3 Impedance (Ω) 10 2
33
CBA285
1.5
nF
3.9
12 nF
; 16
nF
;1
00200 ; 10 0-2 00V 500
10 1
nF ;6 30 47 V nF 10 ;1 0n 00 0V F; 63 0V
00
V
0V
10 0
10 -1
10 -2 10 4
10 5
10 6
10 7
10 8
f (Hz)
10
9
Fig.23 Impedance as a function of frequency: typical curves.
2000 Feb 01
36
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
Maximum DC voltage as a function of temperature
KP/MKP 375
1.2 296x12(full_width) factor 1.0 0.8 0.6 0.4 0.2 0 -60
CBA748
-40
-20
0
20
40
60
80
100 Tamb (°C)
Fig.24 Multiplying factor as a function of temperature.
2000 Feb 01
37
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
Maximum RMS voltage (sinewave) as a function of frequency
KP/MKP 375
3 296x12(full_width) 10
CBA286
AC Voltage (V)
KP/MKP 375
10 2
nF 0 1. nF 2F 2. .7 n 4 nF 10 nF 22 7 nF 4 nF 0 F 10 0 n 22
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.25 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 630 V.
296x12(full_width) 10 3 AC Voltage (V) KP/MKP 375
CBA830
10 2
nF 0F 1. n 2 2. 7 nF 4. nF 10 nF 22 7 nF 4 nF 0 10 0 nF 22
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.26 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 630 V.
2000 Feb 01
38
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA287
10 2
pF 0 pF 10 0 22 pF 0 47 nF 0 1. nF 2 2. nF 7 4. nF 22 nF 47 nF 0 10
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.27 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 1000 V.
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA831
10 2
pF 0 pF 10 0 22 pF 0 47 nF 0 1. nF 2 2. nF 7 4. nF 22 nF 47 nF 0 10
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.28 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 1000 V.
2000 Feb 01
39
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA288
10 2
nF 0 1. 2 nF F 2. 7 n F 4. 0 n F 1n 22
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.29 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 1600 V.
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA832
10 2
nF 0 1. 2 nF F 2. 7 n 4. 0 nF F 1 2n 2
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.30 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 1600 V.
2000 Feb 01
40
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA940
10 2
nF 0F 1. .2 n 2 nF
4. 10 22 47 nF nF nF
7
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.31 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 1600 V (monitor type).
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA941
10 2
nF 0 1. 2 nF 2.
4. 7 10 22 47 nF nF nF
nF
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.32 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 1600 V (monitor type).
2000 Feb 01
41
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA289
10 2
pF 0 10 pF 0F 22 0 p F 47 .0 n nF 12 2. 7 nF 4. 0 nF 1
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.33 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 2000 V.
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA833
10 2
pF 0 10 pF 0F 22 0 p F 47 .0 n F 1 2n 2. 7 nF 4. nF 10
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.34 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 2000 V.
2000 Feb 01
42
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA942
10 2
nF 0 1. nF 2 2. nF 7 4. nF 10 nF 15
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.35 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 2000 V (monitor type).
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA943
10 2
1. 0 2. 2 4. nF 7 nF 10 nF 15 nF nF
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.36 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 2000 V (monitor type).
2000 Feb 01
43
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
KP/MKP 375
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA290
10 2
nF 0F 1. n 2 2. 7 nF 4.
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.37 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 2500 V.
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA834
10 2
nF 0 1. 2 nF 2. 7 nF 4.
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.38 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 2500 V.
2000 Feb 01
44
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
KP/MKP 375
CBA944
10 2
1. 0 nF 2. 2 4. 7 10 nF nF nF
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10
8
Fig.39 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 2500 V (monitor type).
296x12(full_width) 10 3 KP/MKP 375 AC Voltage (V)
CBA945
10 2
1. 0 2. 2 4. 7 10 nF nF nF nF
10 1 10 3
10 4
10 5
10 6
10 7
f (Hz)
10 8
Fig.40 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 105 °C for URdc = 2500 V (monitor type).
Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = ω × C × U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 25 to 40. 2000 Feb 01 45
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
Tangent of loss angle
KP/MKP 375
296x12(full_width) 102
CBA958
dissipation factor (x 10-4)
1. KP/MKP 2. KP/MKP 3. KP/MKP
10.0 and 15.0 mm pitch all versions 22.5 mm pitch, 1000, 1600, 2000 and 2500V versions 22.5 mm pitch, 630V versions 27.5 mm pitch 630, 1000, 1600 and 2000V versions 27.5 mm pitch, 630V versions
(3)
(2) (1)
101
100 10 2
10 3
10 4
10 5
frequency (Hz)
10 6
Fig.41 Tangent of loss angle as a function of frequency: typical curves.
296x12(full_width) 102 1. KP/MKP dissipation factor (x 10-4) 2. KP/MKP 3. KP/MKP 10.0 and 15.0 mm pitch all versions 22.5 mm pitch, 1000, 1600, 2000 and 2500V versions 22.5 mm pitch, 630V versions 27.5 mm pitch 630, 1000, 1600, 2000 and 2500V versions 27.5 mm pitch, 630V versions (3)
CBA959
(2) (1)
101
100 10 2
10 3
10 4
10 5
frequency (Hz)
10 6
Fig.42 Tangent of loss angle as a function of frequency: maximum curves.
2000 Feb 01
46
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
Insulation resistance
KP/MKP 375
296x12(full_width) 10 6 RC (s)
CBA647
10 5
10 4 0 20 40 60 80 Tamb (°C) 100
Fig.43 RC product as a function of ambient free air temperature; typical curve. Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)
12 296x12(full_width) ∆T (°C) 10 8 6 4 2 0 -60
CBA757
-40
-20
0
20
40
60
80
100 Tamb (°C)
Fig.44 Maximum allowed component temperature rise as a function of the ambient temperature.
2000 Feb 01
47
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C Table 1 Heat conductivity bmax (mm) 10 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 4.0 4.5 5.0 6.0 6.0 6.5 − − − − − − − − − − − − − − − − − − − 5.0 6.0 6.0 6.5 6.5 8.0 8.0 9.0 9.0 11.0 11.0 12.0 12.0 − − − − − − − − − − − − 15 ORIGINAL PITCH (mm) 22.5 − − 12.0 13.0 13.0 15.0 15.0 17.0 17.0 18.0 18.0 20.0 20.0 22.0 − − − − − − − − − − −
KP/MKP 375
27.5 − − 13.0 15.0 15.0 17.0 17.0 18.0 20.0 20.0 22.0 22.0 23.0 25.0 25.0 27.0 27.0 30.0 30.0 30.0 30.0 33.0 33.0 37.0 37.0
Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according chapter “Introduction”, section “Maximum power dissipation”. The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more details) or calculated by ∆ T = P ⁄ G : • ∆T = component temperature rise (°C). • P = power dissipation of the component (mW). • G = heat conductivity of the component (mW/°C).
2000 Feb 01
48
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
Measuring the component temperature A thermocouple must be attached to the capacitor body; see Fig.45.
KP/MKP 375
144x12(halfpage) thermocouple
CBA771
Fig.45 Mounting the thermocouple.
The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by: ∆ T = T c – T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box.
2000 Feb 01
49
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
Application note and limiting conditions To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc).
KP/MKP 375
2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: dU dU 2 2 × ∫ ------- × dt < U Rdc × ------- dt rated dt
0 T
T is the pulse duration. 4. The maximum component surface temperature rise must be lower than the limits in Fig.44. Example C = 10 nF - 1600 V, KP/MKP. This is a signal as in Fig.46 with: Up-p = 1200 V; Up = 1100 V; T1 = 12 µs; T2 = 64 µs. The ambient temperature is 50 °C Checking the conditions: 1. The peak voltage Up = 1100 V is lower than 1600 V (DC). 2. The peak-to-peak voltage 1200 V is lower than 2 × 2 × 500 V ( AC ) = 1414 U p – p . 3. The voltage pulse slope: 320 V/µs is much lower than 7000 V/µs. 4. The dissipated power is 170 mW as calculated with Fourier terms. 170mW This gives a temperature rise of ---------------------------- = 10 ° C which is allowed according Fig.44 for an ambient temperature 17mW ⁄ ° C of 50 °C.
296x12(full_width) voltage
Up
Up-p
time T1 T2
CBA295
Fig.46 Voltage signal.
2000 Feb 01
50
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
MARKING Product marking COUNTRY OF ORIGIN: BELGIUM The capacitors are marked on the top (see Fig.47) with the following information: 1. Capacitance code in accordance with “IEC 60062” 2. Capacitance tolerance: J = ±5%; A = 3.5% 3. Rated peak-to-peak voltage (e.g. 1700 Vp-p) 4. Manufacturer’s type designation (375) 5. Code for dielectric material (KP/MKP) 6. Manufacturer’s emblem (only for original pitch ≥15 mm) 7. Year and month of manufacturing code (only for original pitch ≥22.5 mm).
144x12(halfpage)
KP/MKP 375
BC 375
2n2 J 1700Vp-p KP/MKP M1
CBB076
Fig.47 Example of marking.
COUNTRY OF ORIGIN: PRC (PEOPLE’S REPUBLIC OF CHINA) The capacitors are marked in ink on the front (see Fig.48) with the following information: 1. Capacitance code in accordance with “IEC 60062” 2. Capacitance tolerance: J = ±5%; A = 3.5% 3. Rated d.c. voltage (e.g. 2000 V) 4. Manufacturer’s type designation (375) 5. Code for dielectric material (KP/MKP) 6. Year and week of manufacturing code.
CBA446
144x12(halfpage)
2n2 J 2000V 375 KP/MKP 9910
Fig.48 Example of marking.
2000 Feb 01
51
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
Package marking The package containing the capacitors is marked as shown in Fig.49.
KP/MKP 375
Barcode label marking LINE 1 2 3 4 5 MARKING EXPLANATION Manufacturer's name Country of origin Sub-family Type description Capacitance value in µF, tolerance, voltage and climatic category (“IEC 60068-1”) Batchnumber (only for capacitors from PRC) • Country of origin: Belgium Preference origin code: A Country of origin in code: 170 (Belgium) Responsible production centre: HQ Work order: WO • Country of origin: China Preference origin code: N Country of origin in code: 260 (PRC) Responsible production centre: 07 8 9 10 Product type description Quantity and production period, year and week code Product code (12NC)
6 7
Fig.49 Barcode label.
2000 Feb 01
52
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
QUICK REFERENCE TEST REQUIREMENTS (see note 1) TEST Robustness of leads Tensile strength: “IEC 60068-2-21” Bending: “IEC 60068-2-21” Resistance to soldering heat: “IEC 60068-2-20” Component solvent resistance Robustness of component Vibration: “IEC 60068-2-6 “ Shock: “IEC 60068-2-27 “ Climatic sequence Dry heat: “IEC 60068-2-2” Damp heat, cyclic, test Db, first cycle: “IEC 60068-2-30” Cold: “IEC 60068-2-1 “ Damp heat, cyclic, test Db, remaining cycles: “IEC 60068-2-30 “ Other applicable tests Damp heat, steady state: “IEC 60068-2-3 “ 56 days; 40 °C; 90 to 95% RH ∆C/C ≤ 1% +5 pF ∆tan δ ≤ 5 × 10−4 2 hours; −55 °C 16 hours; 105 °C ∆C/C ≤ 3% +5 pF ∆tan δ ≤ 10 × 10−4 10 to 55 Hz; amplitude 0.75 mm or acceleration 98 m/s2; 6 hours half sinewave; 490 m/s2; 11 ms load 10 N; 10 s load 5 N; 4 × 90 ° solder bath: 260 °C; 10 s isopropyl alcohol; 23 °C; 5 minutes no visible damage legible marking ∆C/C ≤ 1% +5 pF ∆tan δ ≤ 5 × 10−4 PROCEDURE (quick reference)
KP/MKP 375
REQUIREMENTS
∆C/C ≤ 2% (C > 0.0056 µF) ∆C/C ≤ 3% +5 pF (C ≤ 0.0056 µF) ∆tan δ ≤ 5 × 10−4
Rins ≥ 50% of specified value
Rins ≥ 50% of specified value Endurance (AC): “IEC 60384-17 “ 2000 hours; 1.25 × URac (RMS); 50 Hz; 85°C ∆C/C ≤ 2% (C > 0.0056 µF) ∆C/C ≤ 3% +5 pF (C ≤ 0.0056 µF) ∆tan δ ≤ 10 × 10−4 Rins ≥ 50% of specified value 2000 hours; 0.875 × URac (RMS); 50 Hz; 105°C ∆C/C ≤ 5% + 5 pF ∆tan δ ≤ 10 × 10−4 Rins ≥ 50% of specified value Heat storage: “IEC 60384-17 “ 2000 hours; 105 °C ∆C/C ≤ 3% (C > 0.0056 µF) ∆C/C ≤ 5% +5 pF (C ≤ 0.0056 µF) ∆tan δ ≤ 10 × 10−4
2000 Feb 01
53
BCcomponents
Product specification
AC and Pulse metallized polypropylene film capacitors
TEST Resistance to soldering heat with preheating: “IEC 60384-17” Passive flammability: “IEC 60384-1” Endurance (DC): “IEC 60384-17 “ PROCEDURE (quick reference) body temperature: 105 °C; bath temperature: 260 °C; dwell time: 10 s class C 2000 hours: 1.25 × URdc; 85 °C 0.875 × URdc; 105 °C
KP/MKP 375
REQUIREMENTS ∆C/C ≤ 2% +5 pF ∆tan δ ≤ 5 × 10−4 no burning ∆C/C ≤ 3% +5 pF ∆tan δ ≤ 10 × 10−4 Rins ≥ 50% of specified value
Note 1. For detailed information: see “Type detail specification HQN-384-17/104”.
2000 Feb 01
54
工商网监
湘ICP备2023018690号
