LFO-65-D

645 ÷ 660 nm Description: CW output power >1.0 mW LFO-65-d LFO-65-d - is a series of optical module on the base of uncooled Fabry-Perot laser diode coupled with singlemode SMF-28 optical fiber. Hermetically sealed modules are performed in standard coaxial package with built-in driver and gradient collimating microlens. The low operating voltage and current levels enable to use portable power supply. The modules operate in wide temperature range, have stable output power and lifetime more than 5*103 hours. LFO-65-d – are the best light sources for visual damage detecting in lines on singlemode or multimode optical fiber. Optical and electrical characteristics (Т=25оС): Characteristics Symbol POP λOP ∆λ Test condition IOP POP POP Min 0.8 645 Typ. 1.0 650 1.0 Max Units mW Optical parameters Output power from fiber end Wavelength Spectral width (FWHM) 660 2.0 nm nm Optical fiber Fiber core/cladding diameter Optical connector type DC/DCL 9/125 «FC» µm Electrical parameters Operating mode Operating voltage Operating current Reverse polarity protection UP IP yes 2.6 CW 3.0 3.5 50 V mA Climatic parameters Operating temperature range Storage temperature range TOP TST -10 -20 +40 +70 °C °C Package specifications: Pin black red Function “-“ VDC “+” VDC, LD anode, case ROITHNER LASERTECHNIK A-1040 VIENNA, SCHOENBRUNNER STRASSE 7, AUSTRIA TEL: +43 -1- 586 52 43-0 FAX: +43 -1- 586 52 43-44 e-mail: office@roithner-laser.com http://www.roithner-laser.com