LI0201B241R-10

Innovative Technology for a Connected World Ferrite Chip Beads Laird Technologies has broadened its Ferrite Chip Bead product offering by adding the smaller EIA 0201 (Metric 0603) version to the existing EIA 0402 ~ 3312 (Metric 1005 ~ 8531) product family. The smaller foot-print makes this chip bead ideal for miniature and portable electronic system devices. The new LI0201 series is an ultra-compact, monolithic EMI suppression chip designed for digital signal lines. It offers space efficiency with superior EMI noise filtering over a wide frequency range of low to several hundred MHz for broad-band signal interfaces, up to GHz ranges for high-frequency signal lines. LI0201 FEATURES • Rugged monolithic construction • Smaller foot-print: 0.6 mm x 0.3 mm x 0.3 mm • Superior impedance vs. frequency characteristics with low DCR • EMI noise suppression for high frequency and broad-band signal lines • Lead free and RoHS compliant MARKETS • Advanced hand-held devices • Cellular phones • Bluetooth headsets • PDAs • GPS • MP3 players • Digital camcorders and cameras ELECTRICAL PROPERTIES IMpedanCe (Ω) Part Number Metric Package Size 0603 0603 0603 0603 0603 0603 0603 0603 25 MHz 7 11 31 18 41 39 59 81 100 MHz 33 56 80 80 80 120 120 240 500 MHz 113 186 195 335 119 247 189 586 1 GHz 153 252 224 428 116 269 182 321 peak IMpedanCe Frequency (MHz) 1646 1347 978 903 605 800 630 390 Impedance (Ω) 171 268 225 434 120 275 190 619 DCR Max (Ω) 0.5 0.6 0.8 0.6 0.5 0.8 0.7 1 Current Rating (mA) 300 300 200 300 500 200 300 200 LI0201C330R-10 LI0201C560R-10 LI0201B800R-10 LI0201C800R-10 LI0201E800R-10 LI0201B121R-10 LI0201C121R-10 LI0201B241R-10 MECHANICAL DIMENSIONS Land Pattern Metric (EIA) Pkg Size 0603 (0201) A mm (inch) 0.60 (.024) B mm (inch) 0.30 (.012) C mm (inch) 0.30 (.012) D mm (inch) 0.15 (.006) G mm (inch) 0.25 (.010) H mm (inch) 0.32 (.013) L mm (inch) 0.69 (.027) global solutions: local support USA: +1 800 634.2673 +1 423 308.1690 Europe: +49 8031.2460.0 Asia: +86 755.2714.1166 www.lairdtech.com TM Ferrite Chip Beads Innovative Technology for a Connected World LI0201B121R-10 300 0 mA LI0201 LI0201B241R-10 700 600 500 400 300 200 100 0 0 mA 40 mA 80 mA 120 mA 160 mA 200 mA 250 40 mA 80 mA 120 mA 200 150 160 mA 200 mA 100 50 0 1 10 100 1000 10000 1 10 100 1000 10000 LI0201B800R-10 250 0 mA LI0201C121R-10 200 180 160 140 120 100 80 60 0 mA 60 mA 120 mA 180 mA 240 mA 300 mA 200 40 mA 80 mA 150 120 mA 160 mA 100 200 mA 50 40 20 0 1 10 100 1000 10000 0 1 10 100 1000 10000 LI0201C330R-10 180 160 140 120 100 80 60 40 50 20 0 1 10 100 1000 10000 0 1 0 mA 60 mA 120 mA 180 mA 240 mA 300 mA LI0201C560R-10 300 0 mA 250 60 mA 120 mA 180 mA 200 150 240 mA 300 mA 100 10 100 1000 10000 LI0201C800R-10 500 450 400 350 300 250 200 150 0 mA 60 mA 120 mA 180 mA 240 mA 300 mA LI0201E800R-10 140 120 100 80 60 40 20 0 0 mA 100 mA 200 mA 300 mA 400 mA 500 mA 100 50 0 1 10 100 1000 10000 1 10 100 1000 10000 Ferrite Chip Beads Innovative Technology for a Connected World LI0201 Competitor Cross-Reference CoMpeTITors Murata BLM03PG330SN1 TDK MMZ0603D330C MMZ0603D560C BLM03AG800SN1 BLM03BB121SN1 BLM03BD121SN1 BLM03AG121SN1 BLM03BD241SN1 BLM03AG241SN1 MMZ0603S800C MMZ0603D800C MMZ0603S121C MMZ0603Y121C MMZ0603S241C MMZ0603Y241C Taiyo Yuden BK0603HS330 BK0603LL330 BK0603LL560 BK0603HS800 BK0603HS121 BK0603HM121 BK0603LL121 BK0603HS241 BK0603HM241 LaIrd TeChnoLogIes Part Number LI0201C330R-10 LI0201C560R-10 LI0201B800R-10 LI0201C800R-10 LI0201E800R-10 LI0201B121R-10 LI0201C121R-10 LI0201B241R-10 25MHz 7 11 31 18 41 39 59 81 IMpedanCe (Ω) 100MHz 33 56 80 80 80 120 120 240 500MHz 113 186 195 335 119 247 189 586 1GHz 153 252 224 428 116 269 182 321 peak IMpedanCe Frequency (MHz) 1646 1347 978 903 605 800 630 390 Impedance (Ω) 171 268 225 434 120 275 190 619 DCR Max 0.5 0.6 0.8 0.6 0.5 0.8 0.7 1 Current Rating 300 300 200 300 500 200 300 200 Ferrite Chip Beads Innovative Technology for a Connected World LI0201 Packaging Specifications STANDARD QUANTITY Type 0201 QTY (PCS) 15,000 REEL DIMENSION TAPING DIMENSION 8mm wide * Paper Tape unit:mm Type 0201 W [mm] 9.0 ±0.3 TAPING MATERIAL * Paper Tape Product Type 0201 A 0.38 ±0.02 B 0.68 ± 0.02 P 2.0 ±0.05 T(max.) 0.44 Top tape Chip Bead Paper tape Bottom tape TOP TAPE STRENGTH * The force for tearing off top tape is 20 to 70 grams in the arrow direction. 165° to 180° Top Cover Tape Sprocket hole Chip cavity LEADER AND BLANK PORTION Blank 10 to 20 pitches Chips Blank 20 to 40 pitches Leader 210mm to 250mm Drawing direction * The pitch holes shift within ±0.3mm for cumulative 10 pitches global solutions: local support USA: +1 800 634.2673 +1 423 308.1690 Europe: +49 8031.2460.0 Asia: +86 755.2714.1166 www.lairdtech.com TM SIP-SPEC-0201 1008 Any information furnished by Laird Technologies and its agents is believed to be accurate and reliable. Responsibility for the use and application of Laird Technologies materials rests with the end user since Laird Technologies and its agents cannot be aware of all potential uses. Laird Technologies makes no warranties as to the fitness, merchantability, or suitability of any Laird Technologies materials or products for any specific or general uses. Laird Technologies shall not be liable for incidental or consequential damages of any kind. All Laird Technologies products are sold pursuant to the Laird Technologies domestic terms and conditions of sale in effect from time to time, a copy of which will be furnished upon request. For further information please visit our website at www.lairdtech.com Alternatively contact: sales@lairdtech.com. Bluetooth® is a trademark owned by Bluetooth SIG, Inc., USA and licensed to Laird Technologies. ® 2008 All Rights Reserved. Laird Technologies is a registered trademark of Laird Technologies, Inc. Ferrite Chip Beads Innovative Technology for a Connected World LI0201 Application Notes LEAD-FREE/ROHS COMPLIANCE PART NUMBERING SYSTEM All Laird Technologies’ surface mount and through hole EMI components (including assemblies with wire and cofired monolithic ferrite chip beads and common mode chokes) are available lead-free and RoHS compliant. Lead-free board level part numbers are differentiated by a suffix descriptor. The suffix (-10) identifies the part number for all lead-free parts. This part number suffix is for use on board level part numbers only. PART NUMBER EXAMPLES Old Part New Part HZ0805E601R-00 HZ0805E601R-10 contains lead is lead-free Old Part 28F0121-0SR contains lead New Part 28F0121-0SR-10 is lead-free All Laird Technologies’ new and old ferrite cable cores are RoHS compliant. No part number change for cable cores. COMPOSITION Laird Technologies’ lead-free component terminations and wire platings are 100% matte Tin (Sn) over a Nickel (Ni) barrier and are reverse compatible with existing Tin (Sn)/Lead (Pb) materials. Concerns over the use of pure tin coatings on component leads and terminations, due to the possibility of tin whiskering, are still under industry discussion. Electroplating 100% matte tin over a nickel barrier is recognized as an effective whisker growth mitigation strategy that is accepted by most industry groups. Laird Technologies’ maintains a minimum plating thickness of 2.5µm [99µin] of Tin, and 0.7µm [28µin] of Nickel. RECOMMENDED LEAD-FREE SOLDERING PROFILE While Laird Technologies’ lead-free surface mount and through hole components are reverse compatible with existing Sn/Pb materials, higher peak temperatures (up to 260°C) provide better wetting characteristics during the solder reflow process. The higher reflow temperatures typically used for lead-free processes will not damage Laird Technologies’ surface mount components, but the delta T between the board and larger components must be considered. Smaller delta Ts can be achieved with slower belt speed to increase the pre-heat time. Soldering cycle time (throughput) must be balanced with reflow temperature. Allowance must be made for the coldest part (largest heat sink) to solder, considering the thermal mass of the board and size of the components. global solutions: local support USA: +1 800 634.2673 +1 423 308.1690 Europe: +49 8031.2460.0 Asia: +86 755.2714.1166 www.lairdtech.com TM Ferrite Chip Beads Innovative Technology for a Connected World MOISTURE SENSITIVITY Laird Technologies’ surface mount components are not moisture sensitive as defined in IPC / JEDC J-STD-020C, as they are hermetic devices. All surface mount components are packaged in tape & reel. Each reel is single packed in a sealed bag with sufficient desiccant to prevent oxidation of part terminations and maintain shelf life. LI0201 Application Notes SHELF LIFE Cofire Monolithic Products are allowed twelve (12) months from date of shipment for product stored in unopened, original packaging. Once the original packaging is opened the shelf life is reduced to three months (or the remainder of the 12 months if opened after 9 months).* Assembled Products with wire are allowed twenty-four (24) months from date of shipment for product stored in unopened, original packaging. Once the original packaging is opened the shelf life is reduced to six Months (or the remainder of the 24 months if opened after 18 months).* *Note: Board Level Cofire (monolithic) and Assembled products with wire must be stored in a non-corrosive, temperature and humidity controlled environment. The temperature should be between –5°C and +40°C, and the humidity between 40 and 60% RH, with no sudden changes. Ferrite Cores for cables and wiring harnesses have an unlimited shelf life. All cores are RoHS compliant. Ferrite Disks & Plates with adhesive have twenty-four (24) months shelf life on the adhesive from date of certificate of analysis. Ferrite Disks & Plates will be labeled at the manufacturing site to indicate expiration date of the adhesive on the disk or plate. Ferrite Disks & Plates are RoHS compliant. OPERATING TEMPERATURE FOR BOARD LEVEL SHIELDS All board level part electrical specifications and tolerances are based on room temperature (23°C ± 2°C). Laird Technologies’ board level parts have an operating temperature of -40˚C to +125˚C (unless stated otherwise). While the parts will continue to operate and not be damaged over this range, they may not operate within the specified electrical performance tolerances during exposure to extreme temperatures. NOTE : All Laird Technologies’ Ferrite EMI cable cores are RoHS compliant global solutions: local support USA: +1 800 634.2673 +1 423 308.1690 Europe: +49 8031.2460.0 Asia: +86 755.2714.1166 www.lairdtech.com TM