MKP-338-2

BCcomponents DATA SHEET MKP 338 2 Interference suppression film capacitors Product specification Supersedes data of 2000-06-08 File under BCcomponents, BC05 2000 Sep 11 BCcomponents Product specification Interference suppression film capacitors MKP RADIAL POTTED TYPE MKP 338 2 PITCH 7.5/10/15/22.5/27.5 mm PITCH 7.5 mm (bent back leads) 296x12(full_width) P = 7.5, 10 and 15 mm P(bent back leads) = 7.5 mm P = 22.5 and 27.5 mm CBA899 Fig.1 Simplified outlines. FEATURES • 7.5 to 27.5 mm lead pitch • Supplied loose in box, taped on ammopack or reel • Consists of a low-inductive wound cell of metallized polypropylene film, potted in a flame-retardant case. APPLICATIONS • For X2 electromagnetic interference suppression • Specially designed to meet the REQUIREMENTS of the “IEC 60384-14 2nd edition and EN 132400”, requiring for X2 a 2.5 kV peak pulse voltage test and both UL1414 and CSA-C22.2 No 1 specifications. DETAIL SPECIFICATION For more detailed data and test requirements see “Type detail specification HQN-384-14/111”. QUICK REFERENCE DATA DESCRIPTION Capacitance range (E12 series) Capacitance tolerance Rated (AC) voltage, 50 to 60 Hz Rated (DC) voltage Climatic category Rated temperature Maximum application temperature Reference specifications Safety approvals: 250 V 275 V CSA-C22.2 No 1; UL1414; note 2 CSA-C22.2 No 8; note 1 SEV; VDE; FI; N; D; S; IMQ; ÖVE; CCEE; note 2 305 V Materials Safety class Notes 1. Pending. 2. Approved. UL1283; note 2 qualified in accordance with UL94V-O X2 1 nF to 3.3 µF ±20%; ±10%; ±5% 275 V 630 V 55/105/56/B 105 °C 105 °C IEC 60384-14 2nd edition and EN 132400 VALUE 2000 Sep 11 2 BCcomponents Product specification Interference suppression film capacitors SAFETY APPROVALS SAFETY APPROVALS (X2) UL1414 VOLTAGE 250 V (AC) VALUE 1 nF to 1 µF MKP 338 2 FILE NUMBERS E112471 UL1283 305 V (AC) 1 nF to 3.3 µF E109565 CSA-C22.2 No.1 250 V (AC) 1 nF to 1 µF LR94054 CSA-C22.2 No.8 275 V (AC) 1 nF to 3.3 µF pending SEV (EN132400) 275 V (AC) 1 nF to 3.3 µF 99,6 60107,02 V DE VDE (EN132400) 275 V (AC) 1 nF to 3.3 µF 115223 FI (EN132400) 275 V (AC) 1 nF to 3.3 µF FI 11681 N D NEMKO (EN132400) 275 V (AC) 1 nF to 3.3 µF P99102661 DEMKO (EN132400) 275 V (AC) 1 nF to 3.3 µF 99-03462 SEMKO (EN132400) 275 V (AC) 1 nF to 3.3 µF 9839136/02 IMQ (EN132400) 275 V (AC) 1 nF to 3.3 µF V4693 .. OVE ÖVE (EN132400) 275 V (AC) 1 nF to 3.3 µF E260-009 CCEE 275 V (AC) 1 nF to 3.3 µF CH0038043-99 2000 Sep 11 3 BCcomponents Product specification Interference suppression film capacitors COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 7.5 mm 7.5 mm (bent back) 338 2 10.0 mm 15.0 mm 22.5 mm 27.5 mm Example: CAPACITANCE (numerically) MKP 338 2 MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5 X2 104 = 10 x 10 = 100 nF 2222 338 2X XX X TYPE 338 2 PACKAGING(1) loose in box taped X2 STANDARD DIMENSIONS lead length 3.5 mm lead length 5.0 mm lead length 25.0 mm pitch = 7.5 mm or bent back to 7.5 mm lead length 3.5 mm lead length 5.0 mm lead length 25.0 mm H = 18.5 mm; for P0 = 12.7 mm; note 2 ALTERNATIVE C-TOL lead length 3.5 mm ±20% PREFERRED TYPES 2222 338 20... 2222 338 22... see Handbook 2222 338 24... 2222 338 26... ON REQUEST 2222 338 21... 2222 338 23... see Datasheet 2222 338 25... 2222 338 27... ON REQUEST 2222 338 2.... 2222 338 2.... 2222 338 2.... 2222 338 2.... see Type 2222 338 2.... detail 2222 338 2.... specification 2222 338 2.... 2222 338 2.... 2222 338 2.... 2222 338 2.... ALTERNATIVE LARGER PITCH SIZES 338 2 loose in box taped ±20% X2 loose in box 338 2 lead length 5.0 mm lead length 25.0 mm pitch = 7.5 mm or bent back to 7.5 mm X2 taped H = 18.5 mm; for P0 = 12.7 mm; note 2 ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% Notes 1) For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2) H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. 2000 Sep 11 4 BCcomponents Product specification Interference suppression film capacitors MKP 338 2 GENERAL DATA MKP 338 2 PITCH 7.5/10 mm PITCH 7.5 mm (bent back leads) l 296x12(full_width) h b l b h h' F' Ødt (1) F H 10 Ødt lt P 15 CBA859 (1) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm Fig.3 Outline. Specific reference data for the 275 V AC (X2) capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: C ≤ 100 nF Rated voltage pulse slope (dU/dt)R at 385 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute R between leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s: Withstanding (AC) voltage between leads and case ≤10 × 10−4 ≤20 × 10−4 100 V/µs >15000 MΩ >30000 MΩ 2200 V; 1 minute 2050 V; 1 minute ≤100 × 10−4 at 10 kHz at 100 kHz 2000 Sep 11 5 BCcomponents Product specification Interference suppression film capacitors URac = 275 V (X2); URdc = 630 V CATALOGUE NUMBER LOOSE IN BOX C (µF) DIMENSIONS(1) b × h (h’) × l (mm) MASS (g) short leads lt = 3.5+1/−0.5 mm lt = 5.0 ±1.0mm C-tol = ±20% catalogue number(3) Pitch = 7.5 ±0.4 mm; dt = 0.50 ±0.05 mm 0.001 0.0015 0.0022 0.0033 0.0047 0.0068 0.01 0.015 0.022 0.033 0.047 5.0 × 10.5 × 10.0 6.0 × 11.5 × 10.0 0.9 1.0 4.0 × 9.0 × 10.0 0.5 2222 338 20102 2222 338 20152 2222 338 20222 2222 338 20332 2222 338 20472 2222 338 20682 2222 338 20103 2222 338 20153 2222 338 20223 2222 338 20333 2222 338 20473 .. 22102 .. 22152 .. 22222 .. 22332 .. 22472 .. 22682 .. 22103 .. 22153 .. 22223 .. 22333 .. 22473 .. 24102 .. 24152 .. 24222 .. 24332 .. 24472 .. 24682 .. 24103 .. 24153 .. 24223 .. 24333 .. 24473 last 5 digits(3) long leads lt = 25.0 ±2.0mm MKP 338 2 AMMOPACK OR REEL(2) C-tol = ±20% last 5 digits(3) ammopack; pitch = 7.5 mm; dt = 0.50 mm .. 26102 .. 26152 .. 26222 .. 26332 .. 26472 .. 26682 .. 26103 .. 26153 .. 26223 .. 26333 .. 26473 reel; pitch = 7.5 mm (bent back); dt = 0.60 mm Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm 0.068 0.1 Notes 6.0 × 12.0 (14.0) × 12.5 1.3 2222 338 20683 2222 338 20104 .. 22683 .. 22104 .. 24683 .. 24104 .. 26683 .. 26104 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. a) For pitch = 7.5 mm: H = 18.5 mm and P0 = 12.7 mm. b) For pitch = 7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. The reel diameter = 500 mm; reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 2000 Sep 11 6 BCcomponents Product specification Interference suppression film capacitors MKP 338 2 GENERAL DATA MKP 338 2 PITCH 15/22.5/27.5 mm PITCH 7.5 mm (bent back leads) 296x12(full_width) l b l b h h h' lt P Ødt 10 F' (1) F H Ødt 15 (1) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm CBA750 Fig.4 Outline. Specific reference data for the 275 V AC (X2) capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: 100 nF < C ≤ 470 nF 470 nF < C ≤ 1 µF C > 1 µF Rated voltage pulse slope (dU/dt)R at 385 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute RC between leads, for C > 0.33 µF at 100 V; 1 minute R between leads and case; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s: C ≤ 1 µF C > 1 µF Withstanding (AC) voltage between leads and case 2200 V; 1 minute 1800 V; 1 minute 2050 V; 1 minute ≤10 × 10−4 ≤20 × 10−4 ≤30 × 10−4 ≤20 × 10−4 ≤70 × 10−4 ≤100 × 10−4 at 10 kHz at 100 kHz − − − 100 V/µs >15000 MΩ >5000 s >30000 MΩ 2000 Sep 11 7 BCcomponents Product specification Interference suppression film capacitors URac = 275 V (X2); URdc = 630 V CATALOGUE NUMBER LOOSE IN BOX C (µF) DIMENSIONS(1) b × h (h’) × l (mm) short leads MASS (g) lt = 3.5 ±0.3 mm lt = 5.0 ±1.0 mm C-tol = ±20% catalogue number(4) Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm last 5 digits(4) long leads lt = 25.0 ±2.0 mm MKP 338 2 REEL(2)(3) C-tol = ±20% last 5 digits(4) pitch = 7.5 mm (bent back); dt = 0.80 mm 0.15 0.22 0.33 7.0 × 13.5 (15.5) × 17.5 8.5 × 15.0 (17.0) × 17.5 10.0 × 16.5 (18.5) × 17.5 8.5 × 18.0 × 26.0 10.0 × 19.5 × 26.0 12.0 × 22.0 × 26.0 15.0 × 25.0 × 31.0 18.0 × 28.0 × 31.0 21.0 × 31.0 × 31.0 1.9 2.6 3.1 2222 338 20154 2222 338 20224 2222 338 20334 .. 22154 .. 22224 .. 22334 .. 24154 .. 24224 .. 24334 .. 26154 .. 26224 .. 26334 Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm 0.47 0.68 1 4.4 5.5 7.8 2222 338 20474 2222 338 20684 2222 338 20105 .. 22474 .. 22684 .. 22105 .. 24474 .. 24684 .. 24105 not available Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm 1.5 2.2 3.3 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. 3. For pitch = 7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. The reel diameter = 500 mm; reel diameter = 356 mm is available on request. 4. The shading indicates preferred types. 12.8 17.2 20.4 2222 338 20155 2222 338 20225 2222 338 20335 .. 22155 .. 22225 .. 22335 .. 24155 .. 24225 .. 24335 not available 2000 Sep 11 8 BCcomponents Product specification Interference suppression film capacitors CONSTRUCTION Description • Low-inductive wound cell of metallized polypropylene (PP) film, potted with epoxy resin in a flame-retardant case • Radial leads, solder-coated: – Copper clad steel wire for original pitch = 7.5 and 10 mm – Copper wire for original pitch = 15, 22.5 and 27.5 mm • Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board. MKP 338 2 SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: • For pitches ≤15 mm capacitors shall be mechanically fixed by the leads. • For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in Fig.6: • Eccentricity as in Fig.6. The maximum eccentricity is smaller than or equal to the lead diameter of the product concerned. • Product height with seating plane as given by “IEC 60717” as reference: hmax ≤ h + 0.3 mm or hmax ≤ h’ + 0.3 mm. 144x12(halfpage) MKP metallized polypropylene film 144x12(halfpage) metal spray layer eccentricity connecting wire CBA198 bmax = b + 0.3 mm lmax = l + 0.3 mm CBA116 Fig.5 Construction. Fig.6 Lay-out. Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter “Packaging information”. Storage temperature • Storage temperature: Tstg = −25 to +40 °C with RH maximum 80% without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient temperature of 23 ±1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ±2%. For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 2000 Sep 11 9 BCcomponents Product specification Interference suppression film capacitors CHARACTERISTICS Capacitance MKP 338 2 CBA505 296x12(full_width) 4 ∆C/C (%) 2 typical 0 max. -2 -4 -6 -50 min. 0 50 Tamb (°C) 100 Fig.7 Capacitance change at 1 kHz as a function of temperature. Tangent of loss angle 296x12(full_width) 10 3 dissipation factor (x 10-4) CBA212 10 2 220 n F 1µ C> 1µF C≤ F< C≤ 220 nF F< 47 n 10 1 10 n nF ≤ 47 F 1 µF); note 2 |∆C/C| ≤ 5% ∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 2 ∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 2 |∆C/C| ≤ 5% ∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 2 ∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 2 Rins ≥ 50% of specified value ∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 2 ∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 2 Rins ≥ 50% of specified value |∆C/C| ≤10% ∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 2 ∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 2 Rins ≥ 50% of specified value Endurance (AC): “IEC 60384-14” 3 × 2.5 kV pulse voltage for X2; 1000 hours; 1.25 × URac at 105 °C; once per hour; 0.1 s; 1000 V (RMS) via resistor of 47 Ω; Vp = 1200 V (DC); 1 minute 2000 Sep 11 16 BCcomponents Product specification Interference suppression film capacitors MKP 338 2 TEST Charge and discharge: “IEC 60384-14” PROCEDURE (quick reference) 10000 cycles; 5 ms; 1.5 × dV/dt |∆C/C| ≤ 10% REQUIREMENTS ∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 2 ∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 2 Rins ≥ 50% of specified value Passive flammability: “IEC 60384-14” Active flammability: “IEC 60384-14” Heat storage: “IEC 60384-14” class B 20 × 2.5 kV discharge 1000 hours; 105 °C no burning no burning |∆C/C| ≤ 5% ∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 2 ∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 2 Resistance to soldering heat with preheating: “IEC 60384-14” Active flammability test preheating: 105 °C; solder bath: 260 °C; 10 s voltage proof up to 2 × peak impulse voltage of 4.13 or until breakdown (100 V/sec, current limited 2mA) |∆C/C| ≤ 5% ∆tan δ ≤ 80 × 10−4 (C ≤ 1 µF); note 2 ∆tan δ ≤ 50 × 10−4 (C > 1 µF); note 2 no burning failed capacitors connected to a 250 Vac power supply during 5 minutes. Notes 1. For detailed information: see “Type detail specification HQN-384-14/111”. 2. Measuring frequency 10 kHz for C ≤ 1 µF and 1 kHz for C > 1 µF. 2000 Sep 11 17