MKT366

BC Components Product specification Metallized polyester film capacitors MKT RADIAL EPOXY LACQUERED TYPE MKT 365/366/367 PITCH 5 mm (kinked, straight and bent back leads) PITCH 7.5 mm (kinked and straight leads) handbook, full pagewidth 365 366 367 CBA774 Fig.1 Simplified outlines. FEATURES • Low-inductive wound cell of metallized (PETP) film • Cell protected by epoxy lacquer • Radial leads of solder-coated wire • Resistant to solvents and rinsing liquids. APPLICATIONS • Blocking and coupling • Bypass and energy reservoir. DETAIL SPECIFICATION For more detailed data and test requirements see “Type detail specification HQN-384-02/105”. QUICK REFERENCE DATA DESCRIPTION Capacitance range (E12 series) Capacitance tolerance Rated (DC) voltage Rated (AC) voltage Climatic category Rated temperature Maximum application temperature Tangent of loss angle at 10 kHz Reference specification Performance grade ±10%; ±5% 63 V; 100 V; 250 V; 400 V 40 V; 63 V; 160 V; 220 V 55/100/56 85 °C 100 °C 100 × 10−4 IEC 60384-2 grade 1 (long life) VALUE 0.01 to 1.0 µF 1999 Apr 29 79 BC Components Product specification Metallized polyester film capacitors COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 365 5.0 mm MKT 365 MULTIPLIER (nF) 0.1 1 CAPACITANCE (numerically) 10 100 2 3 4 5 Example: 104 = 10 × 10 = 100 nF 2222 365 XX XX X TYPE PACKAGING LEAD CONFIGURATION kinked leads; H = 16.0 mm; P0 = 12.7 mm bent back kinked leads; H = 16.0 mm; P0 = 12.7 mm kinked leads; H = 16.0 mm; P0 = 12.7 mm bent back kinked leads; H = 16.0 mm; P0 = 12.7 mm C-TOL ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% 63 V 75 76 15 16 71 72 11 12 100 V 85 86 25 26 81 82 21 22 250 V − − 45 46 − − 41 42 400 V − − 55 56 − − 51 52 ammopack 365 taped on reel 1999 Apr 29 80 BC Components Product specification Metallized polyester film capacitors MKT 366/367 TYPE AND PITCHES 366 367 5.0 mm 7.5 mm CAPACITANCE (numerically) MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5 Example: 104 = 10 × 10 = 100 nF 2222 36. XX XX X TYPE PACKAGING LEAD CONFIGURATION kinked; lead length 4.0 mm C-TOL ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% 63 V 75 76 71 72 75 76 71 72 63 V 15 16 11 12 15 16 11 12 100 V 85 86 81 82 85 86 81 82 100 V 25 26 21 22 25 26 21 22 250 V − − − − − − − − 250 V 45 46 41 42 45 46 41 42 400 V − − − − − − − − 400 V 55 56 51 52 55 56 51 52 366 loose in box kinked; lead length 17.0 mm straight; lead length 4.0 mm 367 loose in box straight; lead length 22.0 mm Available on request with pitch = 7.5 mm kinked; lead length 4.0 mm 366 loose in box kinked; lead length 17.0 mm straight; lead length 4.0 mm 367 loose in box straight; lead length 22.0 mm 1999 Apr 29 81 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 GENERAL DATA MKT 365/366/367 PITCH 5 mm (kinked and straight leads) l b ≤1.5 l b handbook, full pagewidth seating plane(1) (2) h α lt ∅1.3 h lt P ∅dt ∅dt P CBA775 A (1) Hole ∅1.0 for dt = 0.5 mm. (2) 0 ≤ α < 50°. Fig.4 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.1 µF 0.1 µF < C ≤ 0.47 µF 0.47 µF < C ≤ 1.0 µF Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C ≤ 0.33 µF at 10 V; 1 minute RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding voltage DC (cut off current 10 mA); rise time 100 V/s Available 63 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. 1999 Apr 29 82 LEAD PITCH CONFIGURATION (mm) 5 5 5 5 5 5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = ±10% 2222 365 75... 2222 365 71... 2222 366 75... 2222 366 71... 2222 367 75... 2222 367 71... C-tol = ±5% 2222 365 76... 2222 365 72... 2222 366 76... 2222 366 72... 2222 367 76... 2222 367 72... preferred on request on request on request on request on request VALUE at 1 kHz ≤75 × 10−4 ≤75 × 10−4 ≤75 × 10−4 at 10 kHz ≤130 × 10−4 ≤130 × 10−4 ≤130 × 10−4 110 V/µs >15000 MΩ >5000 s >30000 MΩ 100 V; 1 minute at 100 kHz ≤225 × 10−4 ≤300 × 10−4 − DIMENSIONS ORDERING H = 16.0 mm; note 2 lt = 4.0 +1.0/−0.5 mm lt = 17.0 ±4.0 mm lt = 4.0 +1.0/−0.5 mm lt = 22.0 ±4.0 mm kinked straight BC Components Product specification Metallized polyester film capacitors URdc = 63 V; URac = 40 V MKT 365/366/367 Pitch 5 mm (kinked and straight leads) CATALOGUE NUMBER C (µF) DIMENSIONS(1) bmax × hmax × lmax (mm) MASS (g) AMMOPACK; H = 16.0 mm C-tol = ±10% catalogue number(2) C-tol = ±5% last 5 digits(2) Pitch = 5.0 +0.4/−0.2 mm; dt = 0.50 ±0.05 mm; A = 1.7 ±0.3 mm 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Notes 1. Dimensions in brackets for straight leads. 2. The shading indicates preferred types. 4.0 × 13.0 (8.0) × 7.3 4.0 × 13.5 (8.5) × 7.3 4.2 × 13.5 (8.5) × 7.3 4.5 × 14.0 (9.0) × 7.3 4.5 × 14.5 (10.5) × 7.3 4.5 × 15.5 (11.5) × 7.3 5.0 × 14.0 (10.0) × 7.3 5.5 × 14.5 (10.5) × 7.3 5.5 × 15.0 (11.0) × 7.3 5.5 × 15.5 (11.5) × 7.3 0.3 0.4 0.4 0.4 0.4 0.4 0.4 0.4 0.5 0.5 4.0 × 12.5 (7.5) × 7.3 0.3 2222 365 75473 2222 365 75563 2222 365 75683 2222 365 75823 2222 365 75104 2222 365 75124 2222 365 75154 2222 365 75184 2222 365 75224 2222 365 75274 2222 365 75334 2222 365 75394 2222 365 75474 2222 365 75564 2222 365 75684 2222 365 75824 2222 365 75105 .. 76473 .. 76563 .. 76683 .. 76823 .. 76104 .. 76124 .. 76154 .. 76184 .. 76224 .. 76274 .. 76334 .. 76394 .. 76474 .. 76564 .. 76684 .. 76824 .. 76105 1999 Apr 29 83 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 GENERAL DATA MKT 365/366/367 PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads) l handbook, full pagewidth l b ≤1.5 l b seating plane(1) α (2) h α (2) h ∅1.3 h lt lt lt P A P A ∅dt P ∅dt CBA948 (1) Hole ∅1.0 for dt = 0.6 mm. (2) 0 ≤ α < 50°. Fig.5 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.1 µF 0.1 µF < C ≤ 0.47 µF 0.47 µF < C ≤ 1.0 µF Rated voltage pulse slope (dU/dt)R at 63 V (DC) R between leads, for C ≤ 0.33 µF at 10 V; 1 minute RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Available 63 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. DIMENSIONS H = 16.0 mm; note 2 lt = 4.0 +1.0/−0.5 mm lt = 17.0 ±4.0 mm lt = 4.0 +1.0/−0.5 mm lt = 22.0 ±4.0 mm LEAD PITCH CONFIGURATION (mm) bent back kinked straight 5 5 7.5 7.5 7.5 7.5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = ±10% 2222 365 15... 2222 365 11... 2222 366 15... 2222 366 11... 2222 367 15... 2222 367 11... C-tol = ±5% 2222 365 16... 2222 365 12... 2222 366 16... 2222 366 12... 2222 367 16... 2222 367 12... ORDERING preferred on request on request on request on request on request VALUE at 1 kHz ≤75 × 10−4 ≤75 × 10−4 ≤75 × 10−4 at 10 kHz ≤130 × 10−4 ≤130 × 10−4 ≤130 × 10−4 110 V/µs >15000 MΩ >5000 s >30000 MΩ 100 V; 1 minute at 100 kHz ≤225 × 10−4 ≤300 × 10−4 − 1999 Apr 29 84 BC Components Product specification Metallized polyester film capacitors URdc = 63 V; URac = 40 V MKT 365/366/367 Pitch 5 mm (bent back leads) PACKAGING C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) AMMOPACK; H = 16.0 mm C-tol = ±10% catalogue number(1) C-tol = ±5% last 5 digits(1) Pitch = 5.0 +0.4/−0.2 mm; dt = 0.60 ±0.06 mm; A = 1.7 ±0.3 mm(2) 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see “Type detail specification HQN-384-02/105”. 5.5 × 15.0 × 10.0 0.7 4.5 × 14.0 × 10.0 5.0 × 14.5 × 10.0 0.5 0.6 4.0 × 13.5 × 10.0 0.4 2222 365 15124 2222 365 15154 2222 365 15184 2222 365 15224 2222 365 15274 2222 365 15334 2222 365 15394 2222 365 15474 2222 365 15564 2222 365 15684 2222 365 15824 2222 365 15105 .. 16124 .. 16154 .. 16184 .. 16224 .. 16274 .. 16334 .. 16394 .. 16474 .. 16564 .. 16684 .. 16824 .. 16105 1999 Apr 29 85 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 GENERAL DATA l b ≤1.5 handbook, full pagewidth MKT 365/366/367 PITCH 5 mm (kinked and straight leads) l b seating plane(1) (2) h α lt ∅1.3 h lt P ∅dt ∅dt P CBA775 A (1) Hole ∅1.0 for dt = 0.5 mm. (2) 0 ≤ α < 50°. Fig.6 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.1 µF 0.1 µF < C ≤ 0.47 µF Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Available 100 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. LEAD PITCH CONFIGURATION (mm) 5 5 5 5 5 5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = ±10% 2222 365 85... 2222 365 81... 2222 366 85... 2222 366 81... 2222 367 85... 2222 367 81... C-tol = ±5% 2222 365 86... 2222 365 82... 2222 366 86... 2222 366 82... 2222 367 86... 2222 367 82... preferred on request on request on request on request on request VALUE at 1 kHz ≤75 × 10−4 ≤75 × 10−4 at 10 kHz ≤130 × 10−4 ≤130 × 10−4 110 V/µs >15000 MΩ >5000 s >30000 MΩ 160 V; 1 minute at 100 kHz ≤225 × 10−4 ≤225 × 10−4 DIMENSIONS ORDERING H = 16.0 mm; note 2 lt = 4.0 +1.0/−0.5 mm lt = 17.0 ±4.0 mm lt = 4.0 +1.0/−0.5 mm lt = 22.0 ±4.0 mm kinked straight 1999 Apr 29 86 BC Components Product specification Metallized polyester film capacitors URdc = 100 V; URac = 63 V MKT 365/366/367 Pitch 5 mm (kinked and straight leads) CATALOGUE NUMBER C (µF) DIMENSIONS(1) bmax × hmax × lmax (mm) MASS (g) AMMOPACK; H = 16.0 mm C-tol = ±10% catalogue number(2) C-tol = ±5% last 5 digits(2) Pitch = 5.0 +0.4/−0.2 mm; dt = 0.50 ±0.05 mm; A = 1.7 ±0.3 mm 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 Notes 1. Dimensions in brackets for straight leads. 2. The shading indicates preferred types. 4.2 × 13.5 (8.5) × 7.3 4.5 × 14.0 (9.0) × 7.3 0.4 0.4 4.0 × 13.5 (8.5) × 7.3 0.4 4.0 × 13.0 (8.0) × 7.3 0.3 4.0 × 12.5 (7.5) × 7.3 0.3 3.7 × 12.5 (7.5) × 7.3 0.3 2222 365 85103 2222 365 85123 2222 365 85153 2222 365 85183 2222 365 85223 2222 365 85273 2222 365 85333 2222 365 85393 2222 365 85473 2222 365 85563 2222 365 85683 2222 365 85823 2222 365 85104 2222 365 85124 2222 365 85154 2222 365 85184 2222 365 85224 2222 365 85274 .. 86103 .. 86123 .. 86153 .. 86183 .. 86223 .. 86273 .. 86333 .. 86393 .. 86473 .. 86563 .. 86683 .. 86823 .. 86104 .. 86124 .. 86154 .. 86184 .. 86224 .. 86274 1999 Apr 29 87 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 GENERAL DATA MKT 365/366/367 PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads) l handbook, full pagewidth l b ≤1.5 l b seating plane(1) α (2) h α (2) h ∅1.3 h lt lt lt P A P A ∅dt P ∅dt CBA948 (1) Hole ∅1.0 for dt = 0.6 mm. (2) 0 ≤ α < 50°. Fig.7 Outline. Specific reference data for the 100 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.1 µF 0.1 µF < C ≤ 0.47 µF Rated voltage pulse slope (dU/dt)R at 100 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Available 100 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. LEAD PITCH CONFIGURATION (mm) bent back kinked straight 5 5 7.5 7.5 7.5 7.5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = ±10% 2222 365 25... 2222 365 21... 2222 366 25... 2222 366 21... 2222 367 25... 2222 367 21... C-tol = ±5% 2222 365 26... 2222 365 22... 2222 366 26... 2222 366 22... 2222 367 26... 2222 367 22... preferred on request on request on request on request on request VALUE at 1 kHz ≤75 × 10−4 ≤75 × 10−4 at 10 kHz ≤130 × 10−4 ≤130 × 10−4 110 V/µs >15000 MΩ >5000 s >30000 MΩ 160 V; 1 minute at 100 kHz ≤225 × 10−4 ≤225 × 10−4 DIMENSIONS ORDERING H = 16.0 mm; note 2 lt = 4.0 +1.0/−0.5 mm lt = 17.0 ±4.0 mm lt = 4.0 +1.0/−0.5 mm lt = 22.0 ±4.0 mm 1999 Apr 29 88 BC Components Product specification Metallized polyester film capacitors URdc = 100 V; URac = 63 V MKT 365/366/367 Pitch 5 mm (bent back leads) CATALOGUE NUMBER C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) AMMOPACK; H = 16.0 mm C-tol = ±10% catalogue number(1) C-tol = ±5% last 5 digits(1) Pitch = 5.0 +0.4/−0.2 mm; dt = 0.60 ±0.06 mm; A = 1.7 ±0.3 mm(2) 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see “Type detail specification HQN-384-02/105”. 6.0 × 15.5 × 10.5 0.7 4.5 × 14.0 × 10.5 5.0 × 14.5 × 10.5 5.5 × 15.0 × 10.5 0.5 0.6 0.7 4.0 × 13.5 × 10.0 0.4 2222 365 25393 2222 365 25473 2222 365 25563 2222 365 25683 2222 365 25823 2222 365 25104 2222 365 25124 2222 365 25154 2222 365 25184 2222 365 25224 2222 365 25274 2222 365 25334 2222 365 25394 2222 365 25474 .. 26393 .. 26473 .. 26563 .. 26683 .. 26823 .. 26104 .. 26124 .. 26154 .. 26184 .. 26224 .. 26274 .. 26334 .. 26394 .. 26474 1999 Apr 29 89 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 GENERAL DATA MKT 365/366/367 PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads) l handbook, full pagewidth l b ≤1.5 l b seating plane(1) α (2) h α (2) h ∅1.3 h lt lt lt P A P A ∅dt P ∅dt CBA948 (1) Hole ∅1.0 for dt = 0.6 mm. (2) 0 ≤ α < 50°. Fig.8 Outline. Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.1 µF 0.1 µF < C ≤ 0.15 µF Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute R between interconnected leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Available 250 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. LEAD PITCH CONFIGURATION (mm) bent back kinked straight 5 5 7.5 7.5 7.5 7.5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = ±10% 2222 365 45... 2222 365 41... 2222 366 45... 2222 366 41... 2222 367 45... 2222 367 41... C-tol = ±5% 2222 365 46... 2222 365 42... 2222 366 46... 2222 366 42... 2222 367 46... 2222 367 42... preferred on request on request on request on request on request VALUE at 1 kHz ≤75 × 10−4 ≤75 × 10−4 at 10 kHz ≤130 × 10−4 ≤120 × 10−4 70 V/µs >30000 MΩ >30000 MΩ 400 V; 1 minute at 100 kHz ≤225 × 10−4 ≤225 × 10−4 DIMENSIONS ORDERING H = 16.0 mm; note 2 lt = 4.0 +1.0/−0.5 mm lt = 17.0 ±4.0 mm lt = 4.0 +1.0/−0.5 mm lt = 22.0 ±4.0 mm 1999 Apr 29 90 BC Components Product specification Metallized polyester film capacitors URdc = 250 V; URac = 160 V MKT 365/366/367 Pitch 5 mm (bent back leads) CATALOGUE NUMBER C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) AMMOPACK; H = 16.0 mm C-tol = ±10% catalogue number(1) C-tol = ±5% last 5 digits(1) Pitch = 5.0 +0.4/−0.2 mm; dt = 0.60 ±0.06 mm; A = 1.7 ±0.3 mm(2) 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see “Type detail specification HQN-384-02/105”. 4.5 × 13.0 × 10.0 5.0 × 13.5 × 10.0 5.5 × 14.0 × 10.0 5.5 × 15.5 × 10.0 0.5 0.6 0.6 0.7 4.0 × 13.5 × 10.0 0.4 2222 365 45183 2222 365 45223 2222 365 45273 2222 365 45333 2222 365 45393 2222 365 45473 2222 365 45563 2222 365 45683 2222 365 45823 2222 365 45104 2222 365 45124 2222 365 45154 .. 46183 .. 46223 .. 46273 .. 46333 .. 46393 .. 46473 .. 46563 .. 46683 .. 46823 .. 46104 .. 46124 .. 46154 1999 Apr 29 91 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 GENERAL DATA MKT 365/366/367 PITCH 5 mm (bent back leads) PITCH 7.5 mm (kinked and straight leads) l handbook, full pagewidth l b ≤1.5 l b seating plane(1) α (2) h α (2) h ∅1.3 h lt lt lt P A P A ∅dt P ∅dt CBA948 (1) Hole ∅1.0 for dt = 0.6 mm. (2) 0 ≤ α < 50°. Fig.9 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.056 µF C ≤ 0.1 µF Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute R between interconnected leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Available 400 V DC versions PACKAGING(1) Ammopack Taped on reel Loose in box Loose in box Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. LEAD PITCH CONFIGURATION (mm) bent back kinked straight 5 5 7.5 7.5 7.5 7.5 FIRST 9 DIGITS OF CATALOGUE NUMBER C-tol = ±10% 2222 365 55... 2222 365 51... 2222 366 55... 2222 366 51... 2222 367 55... 2222 367 51... C-tol = ±5% 2222 365 56... 2222 365 52... 2222 366 56... 2222 366 52... 2222 367 56... 2222 367 52... preferred on request on request on request on request on request VALUE at 1 kHz ≤75 × 10−4 ≤75 × 10−4 at 10 kHz ≤120 × 10−4 ≤130 × 10−4 110 V/µs >30000 MΩ >30000 MΩ 640 V; 1 minute at 100 kHz ≤200 × 10−4 ≤225 × 10−4 DIMENSIONS ORDERING H = 16.0 mm; note 2 lt = 4.0 +1.0/−0.5 mm lt = 17.0 ±4.0 mm lt = 4.0 +1.0/−0.5 mm lt = 22.0 ±4.0 mm 1999 Apr 29 92 BC Components Product specification Metallized polyester film capacitors URdc = 400 V; URac = 220 V MKT 365/366/367 Pitch 5 mm (bent back leads) CATALOGUE NUMBER C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) AMMOPACK; H = 16.0 mm C-tol = ±10% catalogue number(1) C-tol = ±5% last 5 digits(1) Pitch = 5.0 +0.4/−0.2 mm; dt = 0.60 ±0.06 mm; A = 1.7 ±0.3 mm(2) 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.01 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 Notes 1. The shading indicates preferred types. 2. Pitch = 7.5 mm (kinked and straight leads) is available on request; for dimensions and package quantities see “Type detail specification HQN-384-02/105”. 4.5 × 13.0 × 10.0 5.0 × 13.5 × 10.0 4.0 × 12.5 × 10.0 4.5 × 13.0 × 10.0 5.0 × 13.5 × 10.0 5.0 × 13.5 × 10.0 5.5 × 14.0 × 10.0 0.6 0.7 0.4 0.5 0.5 0.6 0.7 4.0 × 13.5 × 10.0 0.4 2222 365 55332 2222 365 55392 2222 365 55472 2222 365 55562 2222 365 55682 2222 365 55822 2222 365 55103 2222 365 55123 2222 365 55153 2222 365 55183 2222 365 55223 2222 365 55273 2222 365 55333 2222 365 55393 2222 365 55473 2222 365 55563 .. 56332 .. 56392 .. 56472 .. 56562 .. 56682 .. 56822 .. 56103 .. 56123 .. 56153 .. 56183 .. 56223 .. 56273 .. 56333 .. 56393 .. 56473 .. 56563 1999 Apr 29 93 BC Components Product specification Metallized polyester film capacitors CONSTRUCTION Description • Low-inductive wound cell of metallized polyethylene terephthalate film • Protected by a hard, water repellent, solvent resistant epoxy lacquer • Radial leads, solder coated: – Copper clad steel wire for pitch = 5 mm (kinked and straight leads) – Copper wire for pitch = 5 mm (bent back leads) and pitch = 7.5 mm (kinked and straight leads). Mounting NORMAL USE MKT 365/366/367 The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter “Packaging information”. SPECIFIED METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the underside of the kinks are in good contact with the printed-circuit board: • For pitches ≤15 mm the capacitors shall be mechanically fixed by the leads. • For larger pitches the capacitors shall be mounted in the same way and the body clamped. Storage temperature • Storage temperature: Tstg = −25 to +40 °C with RH maximum 80% without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified all electrical values apply at an ambient free air temperature of 23 ±1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ±2%. For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. metallized polyester film handbook, halfpage metal spray layer connecting wire CBA073 Fig.10 Construction. 1999 Apr 29 94 BC Components Product specification Metallized polyester film capacitors CHARACTERISTICS Capacitance MKT 365/366/367 CBA074 handbook, full pagewidth 2 ∆C C (%) 1 0 −1 −2 −3 102 103 104 f (Hz) 105 Fig.11 Capacitance change as a function of frequency: typical curve. CBA919 handbook, full pagewidth 6 ∆C C (%) 4 2 0 max. −2 typical −4 min. −6 −60 −20 20 60 Tamb (°C) 100 Fig.12 Capacitance change at 1 kHz as a function of ambient free air temperature. 1999 Apr 29 95 BC Components Product specification Metallized polyester film capacitors Impedance MKT 365/366/367 CBA076 102 handbook, full pagewidth Impedance (Ω) 10 63V ;1µ F MKT 365 63V ; 10 0n F 1 10−1 10−2 10−3 104 105 106 107 f (Hz) 108 Fig.13 Impedance as a function of frequency: typical curves. Maximum DC and AC voltage as a function of temperature CBA086 handbook, full pagewidth 1.2 factor 1.0 0.8 0.6 0.4 0.2 0 −60 −40 −20 0 20 40 60 80 Tamb (°C) 100 Fig.14 Multiplying factor for DC and AC voltage as a function of temperature. 1999 Apr 29 96 BC Components Product specification Metallized polyester film capacitors Maximum RMS voltage (sinewave) as a function of frequency MKT 365/366/367 102 handbook, full pagewidth CBA077 MKT 365/366/367 AC voltage (V) 10 47 10 nF F 0n 47 0 10 nF 00 nF 1 10 102 103 104 f (Hz) 105 Fig.15 AC voltage (RS value) as a function of frequency at Tamb ≤ 85 °C for Rdc = 63 V. 102 handbook, full pagewidth CBA776 MKT 365/366/367 AC voltage (V) 10 47 10 nF F 0n 47 0 10 nF 00 nF 1 10 102 103 104 f (Hz) 105 Fig.16 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 100 °C for URdc = 63 V. 1999 Apr 29 97 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 102 handbook, full pagewidth CBA078 MKT 365/366/367 AC voltage (V) 10 nF 10 47 nF 10 0n F 47 0n F 1 10 102 103 104 f (Hz) 105 Fig.17 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C, for URdc = 100 V. 102 handbook, full pagewidth CBA777 MKT 365/366/367 AC voltage (V) 10 10 nF 1 10 nF 10 0 47 nF 0n F 47 102 103 104 f (Hz) 105 Fig.18 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 100 °C for URdc = 100 V. 1999 Apr 29 98 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 103 handbook, full pagewidth MKT 365/366/367 AC voltage (V) CBA079 102 18 47 nF nF 10 1 10 102 103 104 f (Hz) 105 Fig.19 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C, for URdc = 250 V. 103 handbook, full pagewidth MKT 365/366/367 AC voltage (V) CBA778 102 10 18 47 nF nF 1 10 102 103 104 f (Hz) 105 Fig.20 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 100 °C for URdc = 250 V. 1999 Apr 29 99 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 103 handbook, full pagewidth MKT 365/366/367 AC voltage (V) CBA080 102 3.3 nF 15 nF 10 1 10 102 103 104 f (Hz) 105 Fig.21 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C, for URdc = 400 V. 103 handbook, full pagewidth MKT 365/366/367 AC voltage (V) CBA779 102 3.3 10 15 nF nF 1 10 102 103 104 f (Hz) 105 Fig.22 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 100 °C for URdc = 400 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = ω × C × U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 15 to 22. 1999 Apr 29 100 BC Components Product specification Metallized polyester film capacitors Tangent of loss angle MKT 365/366/367 103 handbook, full pagewidth CBA087 dissipation factor (× 10−4) 102 10 102 103 104 f (Hz) 105 Fig.23 Tangent of loss angle as a function of frequency: typical curve. Insulation resistance CBA088 105 RC (s) 104 103 102 −50 0 50 Tamb (°C) 100 Fig.24 RC product as a function of ambient free air temperature: typical curve. 1999 Apr 29 101 BC Components Product specification Metallized polyester film capacitors MKT 365/366/367 Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb) CBA821 handbook, full pagewidth 20 ∆T (°C) 15 10 5 0 −60 −40 −20 0 20 40 60 80 Tamb (°C) 100 Fig.25 Maximum allowed component temperature rise as a function of the ambient temperature. Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C Table 1 Heat conductivity ORIGINAL PITCH (mm) 5 1.5 2.0 2.5 2.5 3.0 3.5 − 7.5 3.0 3.5 3.5 4.0 4.0 4.5 5.0 bmax (mm) 3.5 4.0 4.5 5.0 5.5 6.0 6.5 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. Power dissipation can be calculated in accordance with chapter “Introduction”, section “Maximum power dissipation”. The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more details) or calculated by ∆ T = P ⁄ G : • ∆T = component temperature rise (°C). • P = power dissipation of the component (mW). • G = heat conductivity of the component (mW/°C). 1999 Apr 29 102 BC Components Product specification Metallized polyester film capacitors Measuring the component temperature A thermocouple must be attached to the capacitor body; see Fig.26. MKT 365/366/367 handbook, halfpage thermocouple CBA771 Fig.26 Mounting the thermocouple. The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by ∆ T = T c – T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box. 1999 Apr 29 103 BC Components Product specification Metallized polyester film capacitors Application note and limiting conditions MKT 365/366/367 These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described below. These mains applications are strictly regulated by safety standards and therefore electromagnetic interference suppression capacitors conforming to the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled: dU 2 dU 2 × ∫  -------  × dt < U Rdc ×  -------   dt-   dt-  rated 0 T T is the pulse duration. The rated voltage pulse slope is valid for ambient temperatures up to 85 °C. For higher temperatures a derating factor of 3% per K shall be applied. 4. The maximum component surface temperature rise must be lower than the limits in 0. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1. 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains included). VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Maximum continuous RMS voltage Maximum temporary RMS overvoltage (