BCcomponents
DATA SHEET
MKT 467/468 MKT/MKT 468 Metallized polyester film capacitors
Product specification Supersedes data of April 1999 File under BCcomponents, BC05 2000 Aug 30
BCcomponents
Product specification
Metallized polyester film capacitors
MKT RADIAL EPOXY LACQUERED TYPE
MKT 467/468 MKT/MKT 468
PITCH 10/15/22.5/27.5 mm PITCH 7.5 (bent back leads)
296x12(full_width)
467 (10 mm)
468 (7.5/15 - 22.5 -27.5 mm)
CBA819
Fig.1 Simplified outlines.
APPLICATIONS • Blocking and coupling • Bypass and energy reservoir. FEATURES • Low-inductive wound cell of metallized (PETP) film • Cell protected by epoxy lacquer • Radial leads of solder-coated wire • Withstands solvents and rinsing liquids DETAIL SPECIFICATION For more detailed data and test requirements see “Type detail specification HQN-384-02/102”.
QUICK REFERENCE DATA DESCRIPTION Capacitance range (E12 series) Capacitance tolerance Rated (DC) voltage Rated (AC) voltage Climatic category Rated temperature Maximum application temperature Tangent of loss angle at 10 kHz Reference specifications Performance grade 0.01 to 10 µF ±10%; ±5% 100 V; 250 V; 400 V; 630 V; 1000 V 63 V; 160 V; 200 V; 250 V; 400 V 55/100/56 85 °C 100 °C 100 × 10−4 IEC 60384-2 grade 1 (long life) VALUE
2000 Aug 30
2
BCcomponents
Product specification
Metallized polyester film capacitors
COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 467 10.0 mm
MKT 467
MULTIPLIER (nF) 0.1 1 CAPACITANCE (numerically) 10 100 2 3 4 5
Example: 104 = 10 x 10 = 100 nF
2222
467 XX XX X
TYPE
PACKAGING
LEAD CONFIGURATION lead length 3.5 mm
C-TOL ±10% ±5% ±10% ±5% ±10% ±5%
100 V 04 05 51 52 06 07
250 V 16 17 53 54 18 19
400 V 28 29 55 56 30 31
630 V 40 41 57 58 42 43
loose in box 467 taped on reel lead length 19.0 mm H = 16.0 mm; P0 = 12.7 mm
2000 Aug 30
3
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 468
TYPE AND PITCHES 15/7.5 mm MKT 468 15.0 mm 22.5 mm 27.5 mm 15.0 mm MKT/MKT 468 22.5 mm 27.5 mm Example: CAPACITANCE (numerically)
MULTIPLIER (nF) 0.1 1 10 100 2 3 4 5
104 = 10 x 10 = 100 nF
2222
468 XX XX X
TYPE
PACKAGING
LEAD CONFIGURATION lead length 3.5 mm
C-TOL ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% ±10%
100 V 04 05 51 52 06 07 61 62 −
250 V 16 17 53 54 18 19 63 64 −
400 V 28 29 55 56 30 31 65 66 −
630 V 40 41 57 58 42 43 67 68 −
1000 V − − − − − − − − 60
loose in box long leads MKT 468 taped on reel taped on reel (bent back) MKT/MKT loose in box 468 H = 16.0 mm; P0 = 12.7 mm H = 16.0 mm; P0 = 15.0 mm lead length 3.5 mm
2000 Aug 30
4
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 467 GENERAL DATA
MKT 467
PITCH 10 mm (kinked leads)
296x12(full_width)
l
b
seating plane (1) α (2)
h
lt
P
(1) Hole ∅1.0 for dt = 0.6 mm. (2) 0 ≤ α < 50°.
A
Ødt
CBA100
Fig.4 Outline.
Specific reference data for the 100 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: 0.56 µF < C ≤ 1.0 µF Rated voltage pulse slope (dU/dt)R at 100 V (DC) RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 100 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 ±0.5 mm Loose in box lt = 19.0 ±4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; note 2 C-tol ±10% ±5% ±10% ±5% ±10% ±5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 467 04... 2222 467 05... 2222 467 51... 2222 467 52... 2222 467 06... 2222 467 07... ORDERING preferred preferred on request on request on request on request ≤75 × 10−4 30 V/µs >5000 s ≤120 × 10−4 at 10 kHz
>30000 MΩ
160 V; 1 minute 200 V; 1 minute
2000 Aug 30
5
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 100 V; URac = 63 V CATALOGUE NUMBER C (µF) DIMENSIONS bmax × h max × lmax (mm) MASS (g) LOOSE IN BOX C-tol = ±10% catalogue number(1) Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm; A = 2.0 ±0.5 mm 0.56 0.68 0.82 1.0 Note 1. The shading indicates preferred types. 4.6 × 13.6 × 12.5 5.0 × 14.0 × 12.5 5.5 × 14.5 × 12.5 6.0 × 15.0 × 12.5 0.5 0.6 0.7 0.7 2222 467 04564 2222 467 04684 2222 467 04824 2222 467 04105
MKT 467
C-tol = ±5% last 5 digits(1)
.. 05564 .. 05684 .. 05824 .. 05105
2000 Aug 30
6
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 467 GENERAL DATA
MKT 467
PITCH 10 mm (kinked leads)
296x12(full_width)
l
b
seating plane (1) α (2)
h
lt
P
(1) Hole ∅1.0 for dt = 0.6 mm. (2) 0 ≤ α < 50°.
A
Ødt
CBA100
Fig.5 Outline.
Specific reference data for the 250 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: 0.18 µF < C ≤ 0.22 µF Rated voltage pulse slope (dU/dt)R at 250 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 250 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 ±0.5 mm Loose in box lt = 19.0 ±4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; note 2 C-tol ±10% ±5% ±10% ±5% ±10% ±5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 467 16... 2222 467 17... 2222 467 53... 2222 467 54... 2222 467 18... 2222 467 19... ORDERING preferred preferred on request on request on request on request ≤75 × 10−4 ≤120 × 10−4 120 V/µs >30000 MΩ ≤225 × 10−4 at 10 kHz at 100 kHz
>30000 MΩ
400 V; 1 minute 500 V; 1 minute
2000 Aug 30
7
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 250 V; URac = 160 V CATALOGUE NUMBER C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX C-tol = ±10% catalogue number(1) Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm; A = 2.0 +1.0/−0.5 mm 0.18 0.22 Note 1. The shading indicates preferred types. 5.2 × 14.2 × 12.5 5.8 × 14.8 × 12.5 0.6 0.6 2222 467 16184 2222 467 16224
MKT 467
C-tol = ±5% last 5 digits(1)
.. 17184 .. 17224
2000 Aug 30
8
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 467 GENERAL DATA
MKT 467
PITCH 10 mm (kinked leads)
296x12(full_width)
l
b
seating plane (1) α (2)
h
lt
P
(1) Hole ∅1.0 for dt = 0.6 mm. (2) 0 ≤ α < 50°.
A
Ødt
CBA100
Fig.6 Outline.
Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: C ≤ 0.1 µF Rated voltage pulse slope (dU/dt)R at 400 V (DC) R between leads, for C ≤ 0.33 µF at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 ±0.5 mm Loose in box lt = 19.0 ±4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; note 2 C-tol ±10% ±5% ±10% ±5% ±10% ±5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 467 28... 2222 467 29... 2222 467 55... 2222 467 56... 2222 467 30... 2222 467 31... ORDERING preferred preferred on request on request on request on request ≤75 × 10−4 ≤120 × 10−4 170 V/µs >30000 MΩ ≤200 × 10−4 at 10 kHz at 100 kHz
>30000 MΩ
640 V; 1 minute 800 V; 1 minute
2000 Aug 30
9
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 400 V; URac = 200 V CATALOGUE NUMBER C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX C-tol = ±10% catalogue number(1) Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm; A = 2.0 +1.0/−0.5 mm 0.039 0.047 0.056 0.068 0.082 0.1 Note 1. The shading indicates preferred types. 5.0 × 13.9 × 12.5 5.4 × 14.4 × 12.5 4.4 × 13.4 × 12.5 4.8 × 13.8 × 12.5 5.4 × 14.3 × 12.5 5.6 × 14.6 × 12.5 0.5 0.6 0.5 0.5 0.6 0.6 2222 467 28393 2222 467 28473 2222 467 28563 2222 467 28683 2222 467 28823 2222 467 28104
MKT 467
C-tol = ±5% last 5 digits(1)
.. 29393 .. 29473 .. 29563 .. 29683 .. 29823 .. 29104
2000 Aug 30
10
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 467 GENERAL DATA
MKT 467
PITCH 10 mm (kinked leads)
296x12(full_width)
l
b
seating plane (1) α (2)
h
lt
P
(1) Hole ∅1.0 for dt = 0.6 mm. (2) 0 ≤ α < 50°.
A
Ødt
CBA100
Fig.7 Outline.
Specific reference data for the 630 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: C ≤ 0.033 µF Rated voltage pulse slope (dU/dt)R at 630 V (DC) R between leads, for C ≤ 0.33 µF at 500 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 ±0.5 mm Loose in box lt = 19.0 ±4.0 mm Taped on reel Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; note 2 C-tol ±10% ±5% ±10% ±5% ±10% ±5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 467 40... 2222 467 41... 2222 467 57... 2222 467 58... 2222 467 42... 2222 467 43... ORDERING preferred preferred on request on request on request on request ≤75 × 10−4 ≤120 × 10−4 120 V/µs >30000 MΩ ≤200 × 10−4 at 10 kHz at 100 kHz
>30000 MΩ
1008 V; 1 minute 1260 V; 1 minute
2000 Aug 30
11
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 630 V; URac = 250 V CATALOGUE NUMBER C (µF) DIMENSIONS bmax × hmax × lmax (mm) MASS (g) LOOSE IN BOX C-tol = ±10% catalogue number(1) Pitch = 10.0 ±0.4 mm; dt = 0.60 ±0.06 mm; A = 2.0 +1.0/−0.5 mm 0.01 0.012 0.015 0.018 0.022 0.027 0.033 Note 1. The shading indicates preferred types. 4.1 × 13.1 × 12.5 4.5 × 13.5 × 12.5 4.9 × 13.9 × 12.5 5.4 × 14.4 × 12.5 4.8 × 13.8 × 12.5 5.3 × 14.3 × 12.5 5.9 × 14.9 × 12.5 0.4 0.5 0.5 0.6 0.5 0.6 0.6 2222 467 40103 2222 467 40123 2222 467 40153 2222 467 40183 2222 467 40223 2222 467 40273 2222 467 40333
MKT 467
C-tol = ±5% last 5 digits(1)
.. 41103 .. 41123 .. 41153 .. 41183 .. 41223 .. 41273 .. 41333
2000 Aug 30
12
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 468 GENERAL DATA
l b l
MKT 468
PITCH 15/22.5 mm PITCH 7.5 mm (bent back leads)
b
296x12(full_width)
seating plane (1) α (2)
h F' lt 10 (3) F
h'
H Ødt
CBA818
P
A
Ødt 15
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°. (3) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm
Fig.8 Outline.
Specific reference data for the 100 V DC capacitors DESCRIPTION C ≤ 10.0 µF Rated voltage pulse slope (dU/dt)R at 100 V (DC): lmax = 17.5 mm lmax = 26.0 mm RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 100 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 ±0.5 mm Loose in box long leads; note 2 Taped on reel Taped on reel (bent back) Notes 1. For SPQ refer to this handbook, chapter “Packaging information”. 2. Length of long leads: lt = 19.0 ±4.0 mm for lead pitch = 15.0 mm and 25.0 ±4.0 mm for lead pitch = 22.5 mm. 3. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 3 H = 16.0 mm; P0 = 15.0 mm; note 3 C-tol ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 04... 2222 468 05... 2222 468 51... 2222 468 52... 2222 468 06... 2222 468 07... 2222 468 61... 2222 468 62... ORDERING preferred preferred on request on request on request on request preferred preferred VALUE at 1 kHz ≤75 × 10−4 at 10 kHz ≤120 × 10−4
20 V/µs 10 V/µs >5000 s >30000 MΩ 160 V; 1 minute 200 V; 1 minute
2000 Aug 30
13
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 100 V; URac = 63 V CATALOGUE NUMBER LOOSE IN BOX C (µF) DIMENSIONS(1) bmax × h (h’)max × lmax (mm) MASS (g) short leads C-tol = ±10% catalogue number(3) C-tol = ±5% last 5 digits(3)
MKT 468
REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) pitch 7.5 mm (bent back) C-tol = ±10% C-tol = ±5%
last 5 digits(3)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 1.2 1.5 1.8 2.2 2.7 3.3 5.5 × 14.5 (16.0) × 17.5 6.0 × 15.0 (16.5) × 17.5 6.5 × 15.5 (17.0) × 17.5 7.0 × 16.0 (17.5) × 17.5 8.0 × 17.0 (18.5) × 17.5 8.5 × 17.5 (19.0) × 17.5 6.5 × 18.5 × 26.0 7.0 × 19.5 × 26.0 7.5 × 20.0 × 26.0 8.5 × 21.5 × 26.0 9.5 × 22.5 × 26.0 10.5 × 23.5 × 26.0 0.7 0.9 1.0 1.2 1.4 1.5 2222 468 04125 2222 468 04155 2222 468 04185 2222 468 04225 2222 468 04275 2222 468 04335 .. 05125 .. 05155 .. 05185 .. 05225 .. 05275 .. 05335 .. 61125 .. 61155 .. 61185 .. 61225 .. 61275 .. 61335 .. 62125 .. 62155 .. 62185 .. 62225 .. 62275 .. 62335
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 3.9 4.7 5.6 6.8 8.2 10.0 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 2.8 3.2 3.5 4.1 4.8 5.5 2222 468 04395 2222 468 04475 2222 468 04565 2222 468 04685 2222 468 04825 2222 468 04106 .. 05395 .. 05475 .. 05565 .. 05685 .. 05825 .. 05106 not available
2000 Aug 30
14
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 468 GENERAL DATA
l b l
MKT 468
PITCH 15/22.5/27.5 mm PITCH 7.5 mm (bent back leads)
b
296x12(full_width)
seating plane (1) α (2)
h F' lt 10 (3) F
h'
H Ødt
CBA818
P
A
Ødt 15
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°. (3) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm
Fig.9 Outline.
Specific reference data for the 250 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.47 µF C > 0.47 µF Rated voltage pulse slope (dU/dt)R at 250 V (DC): lmax = 17.5 mm lmax = 26.0 mm lmax = 30.0 mm R between leads, for C ≤ 0.33 µF at 100 V; 1 minute RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 250 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 ±0.5 mm Loose in box long leads; note 2 Taped on reel Taped on reel (bent back) Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: lt = 19.0 ±4.0 mm for lead pitch = 15.0 mm, 25.0 ±4.0 mm for lead pitch = 22.5 mm and 24.0 ±4.0 mm for lead pitch = 27.5 mm. 3. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 3 H = 16.0 mm; P0 = 15.0 mm; note 3 C-tol ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 16... 2222 468 17... 2222 468 53... 2222 468 54... 2222 468 18... 2222 468 19... 2222 468 63... 2222 468 64... ORDERING preferred preferred on request on request on request on request preferred preferred at 1 kHz ≤75 × 10−4 ≤75 × 10−4 VALUE at 10 kHz ≤120 × 10−4 ≤120 × 10−4 45 V/µs 20 V/µs 15 V/µs >30000 MΩ >10000 s >30000 MΩ 400 V; 1 minute 500 V; 1 minute at 100 kHz ≤225 × 10−4 −
2000 Aug 30
15
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 250 V; URac = 160 V CATALOGUE NUMBER LOOSE IN BOX C (µF) DIMENSIONS(1) bmax × h (h’)max × lmax (mm) MASS (g) short leads C-tol = ±10% catalogue number(3) C-tol = ±5% last 5 digits(3)
MKT 468
REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) pitch 7.5 mm (bent back) C-tol = ±10% C-tol = ±5%
last 5 digits(3)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.27 0.33 0.39 0.47 0.56 0.68 0.82 1.0 5.0 × 14.0 (15.5) × 17.5 5.5 × 14.5 (16.0) × 17.5 6.0 × 15.0 (16.5) × 17.5 6.5 × 15.5 (17.0) × 17.5 7.5 × 16.5 (18.0) × 17.5 8.0 × 17.0 (18.5) × 17.5 8.5 × 17.5 (19.0) × 17.5 8.0 × 20.0 (21.5) × 17.5 7.0 × 19.0 × 26.0 8.0 × 21.0 × 26.0 9.0 × 22.0 × 26.0 9.8 × 23.0 × 26.0 11.0 × 24.0 × 26.0 12.5 × 25.5 × 26.0 13.5 × 26.5 × 26.0 14.9 × 28.0 × 26.0 15.0 × 28.0 × 30.0 0.6 0.7 0.9 1.0 1.3 1.4 1.5 1.7 2222 468 16274 2222 468 16334 2222 468 16394 2222 468 16474 2222 468 16564 2222 468 16684 2222 468 16824 2222 468 16105 .. 17274 .. 17334 .. 17394 .. 17474 .. 17564 .. 17684 .. 17824 .. 17105 .. 63274 .. 63334 .. 63394 .. 63474 .. 63564 .. 63684 .. 63824 .. 63105 .. 64274 .. 64334 .. 64394 .. 64474 .. 64564 .. 64684 .. 64824 .. 64105
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 3.2 3.8 4.1 4.8 5.9 6.9 7.5 8.6 2222 468 16125 2222 468 16155 2222 468 16185 2222 468 16225 2222 468 16275 2222 468 16335 2222 468 16395 2222 468 16475 .. 17125 .. 17155 .. 17185 .. 17225 .. 17275 .. 17335 .. 17395 .. 17475 .. 63125 .. 63155 .. 63185 .. 63225 .. 63275 .. 63335 .. 63395 .. 63475 .. 64125 .. 64155 .. 64185 .. 64225 .. 64275 .. 64335 .. 64395 .. 64475
Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 5.6 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 9.1 2222 468 16565 .. 17565 .. 63565 .. 64565
2000 Aug 30
16
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 468 GENERAL DATA
l b l
MKT 468
PITCH 15/22.5/27.5 mm PITCH 7.5 mm (bent back leads)
b
296x12(full_width)
seating plane (1) α (2)
h F' lt 10 (3) F
h'
H Ødt
CBA818
P
A
Ødt 15
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°. (3) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm
Fig.10 Outline.
Specific reference data for the 400 V DC capacitors DESCRIPTION Tangent of loss angle: 0.12 < C ≤ 0.47 µF C > 0.47 µF Rated voltage pulse slope (dU/dt)R at 400 V (DC): lmax = 17.5 mm lmax = 26.0 mm lmax = 30.0 mm R between leads, for C ≤ 0.33 µF at 100 V; 1 minute RC between leads, for C > 0.33 µF at 100 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 ±0.5 mm Loose in box long leads; note 2 Taped on reel Taped on reel (bent back) Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: lt = 19.0 ±4.0 mm for lead pitch = 15.0 mm, 25.0 ±4.0 mm for lead pitch = 22.5 mm and 24.0 ±4.0 mm for lead pitch = 27.5 mm. 3. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 3 H = 16.0 mm; P0 = 15.0 mm; note 3 C-tol ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 28... 2222 468 29... 2222 468 55... 2222 468 56... 2222 468 30... 2222 468 31... 2222 468 65... 2222 468 66... ORDERING preferred preferred on request on request on request on request preferred preferred at 1 kHz ≤75 × 10−4 ≤75 × 10−4 VALUE at 10 kHz ≤120 × 10−4 ≤120 × 10−4 65 V/µs 30 V/µs 25 V/µs >30000 MΩ >10000 s >30000 MΩ 640 V; 1 minute 800 V; 1 minute at 100 kHz ≤225 × 10−4 −
2000 Aug 30
17
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 400 V; URac = 200 V CATALOGUE NUMBER LOOSE IN BOX C (µF) DIMENSIONS(1) bmax × h (h’)max × lmax (mm) MASS (g) short leads C-tol = ±10% catalogue number(3) C-tol = ±5% last 5 digits(3)
MKT 468
REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) pitch 7.5 mm (bent back) C-tol = ±10% C-tol = ±5%
last 5 digits(3)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.12 0.15 0.18 0.22 0.27 0.33 0.39 0.47 5.0 × 14.0 (15.5) × 17.5 5.8 × 15.0 (16.5) × 17.5 6.5 × 15.5 (17.0) × 17.5 7.0 × 15.5 (17.5) × 17.5 7.4 × 16.5 (18.0) × 17.5 8.5 × 17.5 (19.0) × 17.5 7.4 × 19.5 (21.0) × 17.5 8.4 × 20.5 (22.0) × 17.5 7.5 × 19.5 × 26.0 8.0 × 21.0 × 26.0 9.0 × 22.0 × 26.0 9.9 × 23.0 × 26.0 11.0 × 24.0 × 26.0 11.5 × 24.5 × 30.0 12.5 × 25.5 × 30.0 14.0 × 27.0 × 30.0 0.6 0.9 1.0 1.2 1.3 1.5 1.3 1.5 2222 468 28124 2222 468 28154 2222 468 28184 2222 468 28224 2222 468 28274 2222 468 28334 2222 468 28394 2222 468 28474 .. 29124 .. 29154 .. 29184 .. 29224 .. 29274 .. 29334 .. 29394 .. 29474 .. 65124 .. 65154 .. 65184 .. 65224 .. 65274 .. 65334 .. 65394 .. 65474 .. 66124 .. 66154 .. 66184 .. 66224 .. 66274 .. 66334 .. 66394 .. 66474
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.56 0.68 0.82 1.0 1.2 3.2 3.8 4.5 5.2 5.9 2222 468 28564 2222 468 28684 2222 468 28824 2222 468 28105 2222 468 28125 .. 29564 .. 29684 .. 29824 .. 29105 .. 29125 .. 65564 .. 65684 .. 65824 .. 65105 .. 65125 .. 66564 .. 66684 .. 66824 .. 66105 .. 66125
Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 1.5 1.8 2.2 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 6.5 7.1 8.2 2222 468 28155 2222 468 28185 2222 468 28225 .. 29155 .. 29185 .. 29225 .. 65155 .. 65185 .. 65225 .. 66155 .. 66185 .. 66225
2000 Aug 30
18
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 468 GENERAL DATA
l b l
MKT 468
PITCH 15/22.5/27.5 mm PITCH 7.5 mm (bent back leads)
b
296x12(full_width)
seating plane (1) α (2)
h F' lt 10 (3) F
h'
H Ødt
CBA818
P
A
Ødt 15
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°. (3) F − F’ < 0.3 mm F = 7.5 +0.6/−0.1 mm
Fig.11 Outline.
Specific reference data for the 630 V DC capacitors DESCRIPTION Tangent of loss angle: C ≤ 0.1 µF 0.1 µF < C ≤ 0.47 µF C > 0.47 µF Rated voltage pulse slope (dU/dt)R at 630 V (DC): lmax = 17.5 mm lmax = 26.0 mm lmax = 30.0 mm R between leads, for C ≤ 0.33 µF at 500 V; 1 minute RC between leads, for C > 0.33 µF at 500 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 630 V DC versions PACKAGING(1) DIMENSIONS lt = 3.5 ±0.5 mm Loose in box long leads; note 2 Taped on reel Taped on reel (bent back) Notes 1. For SPQ refer to this handbook, chapter “Packaging information”; taped on reel pitch = 27.5 mm is not available. 2. Length of long leads: lt = 19.0 ±4.0 mm for lead pitch = 15.0 mm, 25.0 ±4.0 mm for lead pitch = 22.5 mm and 24.0 ±4.0 mm for lead pitch = 27.5 mm. 3. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. H = 16.0 mm; P0 = 12.7 mm; note 3 H = 16.0 mm; P0 = 15.0 mm; note 3 C-tol ±10% ±5% ±10% ±5% ±10% ±5% ±10% ±5% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 40... 2222 468 41... 2222 468 57... 2222 468 58... 2222 468 42... 2222 468 43... 2222 468 67... 2222 468 68... ORDERING preferred preferred on request on request on request on request preferred preferred at 1 kHz ≤75 × 10−4 ≤75 × 10−4 ≤75 × 10−4 VALUE at 10 kHz ≤120 × 10−4 ≤120 × 10−4 ≤120 × 10−4 90 V/µs 35 V/µs 30 V/µs >30000 MΩ >10000 s >30000 MΩ 1008 V; 1 minute 1260 V; 1 minute at 100 kHz ≤200 × 10−4 ≤225 × 10−4 −
2000 Aug 30
19
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 630 V; URac = 250 V CATALOGUE NUMBER LOOSE IN BOX C (µF) DIMENSIONS(1) bmax × h (h’)max × lmax (mm) MASS (g) short leads C-tol = ±10% catalogue number(3) C-tol = ±5% last 5 digits(3)
MKT 468
REEL DIAMETER = 500 mm; H = 16.0 mm; P0 = 15.0 mm(2) pitch 7.5 mm (bent back) C-tol = ±10% C-tol = ±5%
last 5 digits(3)
Pitch = 15.0 ±0.4 mm (Pitch = 7.5 ±0.4 mm for bent back leads); dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.039 0.047 0.056 0.068 0.082 0.1 0.12 0.15 5.0 × 14.0 (15.5) × 17.5 5.5 × 14.5 (16.0) × 17.5 5.9 × 15.0 (16.5) × 17.5 6.5 × 16.0 (17.5) × 17.5 7.3 × 16.5 (18.0) × 17.5 7.9 × 17.0 (18.5) × 17.5 7.5 × 19.5 (21.0) × 17.5 8.5 × 20.5 (22.0) × 17.5 7.5 × 19.5 × 26.0 8.0 × 21.0 × 26.0 9.0 × 22.0 × 26.0 10.0 × 23.0 × 26.0 11.5 × 24.0 × 26.0 12.5 × 25.5 × 26.0 13.5 × 26.6 × 26.0 15.0 × 28.0 × 26.0 15.0 × 28.0 × 30.0 0.6 0.7 0.9 1.2 1.3 1.4 1.3 1.5 2222 468 40393 2222 468 40473 2222 468 40563 2222 468 40683 2222 468 40823 2222 468 40104 2222 468 40124 2222 468 40154 .. 41393 .. 41473 .. 41563 .. 41683 .. 41823 .. 41104 .. 41124 .. 41154 .. 67393 .. 67473 .. 67563 .. 67683 .. 67823 .. 67104 .. 67124 .. 67154 .. 68393 .. 68473 .. 68563 .. 68683 .. 68823 .. 68104 .. 68124 .. 68154
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.18 0.22 0.27 0.33 0.39 0.47 0.56 0.68 3.5 3.8 4.5 5.2 5.9 6.9 7.5 8.6 2222 468 40184 2222 468 40224 2222 468 40274 2222 468 40334 2222 468 40394 2222 468 40474 2222 468 40564 2222 468 40684 .. 41184 .. 41224 .. 41274 .. 41334 .. 41394 .. 41474 .. 41564 .. 41684 .. 67184 .. 67224 .. 67274 .. 67334 .. 67394 .. 67474 .. 67564 .. 67684 .. 68184 .. 68224 .. 68274 .. 68334 .. 68394 .. 68474 .. 68564 .. 68684
Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5 +1.4/−0.5 mm 0.82 Notes 1. Dimensions in brackets for bent back leads. 2. H = in-tape height; P0 = sprocket hole distance; for detailed specifications refer to this handbook, chapter “Packaging information”. a) For pitch = 15.0 mm: H = 16.0 mm and P0 = 12.7 mm. b) For pitch = 15/7.5 mm (bent back): H = 16.0 mm and P0 = 15.0 mm. Standard reel diameter = 500 mm. Small reel diameter = 356 mm is available on request. 3. The shading indicates preferred types. 8.8 2222 468 40824 .. 41824 .. 67824 .. 68824
2000 Aug 30
20
BCcomponents
Product specification
Metallized polyester film capacitors
MKT/MKT 468 GENERAL DATA
296x12(full_width) l b
MKT/MKT 468
PITCH 27.5 mm
h seating plane (1)
(2) α
lt
P
(1) Hole ∅1.3 for dt = 0.8 mm. (2) 0 ≤ α < 50°.
A
Ødt
CBA266
Fig.12 Outline.
Specific reference data for the 1000 V DC capacitors VALUE DESCRIPTION at 1 kHz Tangent of loss angle: C ≤ 0.1 µF 0.1 µF < C ≤ 0.22 µF Rated voltage pulse slope (dU/dt)R at 1000 V (DC) P = 15 mm P = 22.5 mm P = 27.5 mm R between leads, for C ≤ 0.33 µF at 500 V; 1 minute R between interconnecting leads and casing; 100 V; 1 minute Withstanding (DC) voltage (cut off current 10 mA); rise time 100 V/s Withstanding (DC) voltage between leads and case Available 1000 V DC versions PACKAGING(1) Loose in box Note 1. For SPQ refer to this handbook, chapter “Packaging information”. DIMENSIONS lt = 3.5 ± 0.5 mm C-tol ±10% FIRST 9 DIGITS OF CATALOGUE NUMBER 2222 468 60... ORDERING preferred 200 V/µs 120 V/µs 100 V/µs >30000 MΩ ≤75 × 10−4 ≤75 × 10−4 ≤120 × 10−4 ≤120 × 10−4 ≤200 × 10−4 ≤225 × 10−4 at 10 kHz at 100 kHz
>30000 MΩ
1600; 1 minute 2000 V; 1 minute
2000 Aug 30
21
BCcomponents
Product specification
Metallized polyester film capacitors
URdc = 1000 V; URac = 400 V C (µF) DIMENSIONS bmax × hmax × lmax (mm)
MKT/MKT 468
CATALOGUE NUMBER(1) MASS (g) LOOSE IN BOX; lt = 3.5 ±0.5 mm C-tol = ±10%
Pitch = 15.0 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5+1.4/−0.5 mm 0.015 0.018 0.022 0.027 0.033 0.039 0.047 5.0 × 16.0 × 17.5 5.5 × 16.5 × 17.5 6.0 × 17.0 × 17.5 6.5 × 18.0 × 17.5 8.0 × 18.5 × 17.5 8.5 × 19.5 × 17.5 9.5 × 20.0 × 17.5 7.0 × 20.0 × 26.0 8.0 × 21.0 × 26.0 8.5 × 21.5 × 26.0 9.5 × 22.5 × 26.0 10.5 × 23.5 × 26.0 10.5 × 23.5 × 30.0 11.5 × 24.5 × 30.0 13.0 × 26.0 × 30.0 0.6 0.7 0.9 1.0 1.4 1.5 1.8 2222 468 60153 2222 468 60183 2222 468 60223 2222 468 60273 2222 468 60333 2222 468 60393 2222 468 60473
Pitch = 22.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5+1.4/−0.5 mm 0.056 0.068 0.082 0.1 0.12 3.2 3.8 4.1 4.8 5.5 2222 468 60563 2222 468 60683 2222 468 60823 2222 468 60104 2222 468 60124
Pitch = 27.5 ±0.4 mm; dt = 0.80 ±0.08 mm; A = 2.5+1.4/−0.5 mm 0.15 0.18 0.22 Note 1. The shading indicates preferred types. 5.8 6.5 7.5 2222 468 60154 2222 468 60184 2222 468 60224
2000 Aug 30
22
BCcomponents
Product specification
Metallized polyester film capacitors
CONSTRUCTION Description • Low-inductive wound cell of metallized polyethylene terephthalate film • Protected by a hard, water repellent, solvent resistant epoxy lacquer • Radial leads, copper wire, solder coated. Mounting NORMAL USE
MKT 467/468 MKT/MKT 468
The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by means of automatic insertion machines. For detailed tape specifications refer to this handbook, chapter “Packaging information”. SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION
metallized polyester film 144x12(halfpage)
AND SHOCK
In order to withstand vibration and shock tests, it must be ensured that the underside of the crimps are in good contact with the printed-circuit board: • For pitches ≤15 mm capacitors shall be mechanically fixed by the leads. • For larger pitches the capacitors shall be mounted in the same way and the body clamped.
metal spray layer
Storage temperature • Storage temperature: Tstg = −25 to +40 °C with RH maximum 80% without condensation.
CBA073
connecting wire
Fig.13 Construction: MKT 100, 250, 400 and 630 V.
RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 ±1 °C, an atmospheric pressure of 86 to 106 kPa and a relative humidity of 50 ±2%. For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%.
144x12(halfpage)
metallized polyester film
metal spray layer
connecting wire
CBA229
Fig.14 Construction: MKT/MKT 1000 V.
2000 Aug 30
23
BCcomponents
Product specification
Metallized polyester film capacitors
CHARACTERISTICS Capacitance
MKT 467/468 MKT/MKT 468
CBA074
296x12(full_width) 2 ∆C/C (%) 1
0
-1
-2
-3 10 2
10 3
10 4
f (Hz)
10 5
Fig.15 Capacitance change as a function of frequency: typical curve.
296x12(full_width) 6 ∆C/C (%) 4
CBA922
2
0
max.
400V - 630V - 1000V 250V
-2
typical
-4 min. -6 -60
100V
-20
20
60
Tamb (°C)
100
Fig.16 Capacitance as a function of ambient free air temperature, measured at 1 kHz, 1 V.
2000 Aug 30
24
BCcomponents
Product specification
Metallized polyester film capacitors
Impedance
MKT 467/468 MKT/MKT 468
296x12(full_width) 10 3 Impedance (Ω) 10
2
CBA820
MKT 467/468
400
V; 3 9
0nF
10
1
10
0
10 -1
10 -2 10 3
10 4
10 5
10 6
f (Hz)
10 7
Fig.17 Impedance as a function of frequency: typical curve.
Maximum DC and AC voltage as a function of temperature
1.2 296x12(full_width) factor 1.0 0.8
CBA086
0.6 0.4
0.2 0 -60 -40 -20 0 20 40 60 80 100 Tamb (°C)
Fig.18 Multiplying factor for DC and AC voltage as a function of temperature.
2000 Aug 30
25
BCcomponents
Product specification
Metallized polyester film capacitors
Maximum RMS voltage and AC current (sinewave) as a function of frequency
MKT 467/468 MKT/MKT 468
296x12(full_width) 10 2 MKT 467/468 AC voltage (V)
CBA809
10 1
10 0 10 2
1 µF (lmax = 12.5 mm) 1.5 µF (lmax = 17.5 mm) 3.9 µF (lmax = 26.0 mm) 10 µF (lmax = 26.0 mm) 10 3 10 4 10 5 f (Hz) 10 6
Fig.19 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 100 V.
296x12(full_width) 10 2 MKT 467/468 AC voltage (V)
CBA810
10 1
10 0 10 1
1 µF (lmax = 12.5 mm) 1.5 µF (lmax = 17.5 mm) 3.9 µF (lmax = 26.0 mm) 10 µF (lmax = 26.0 mm) 10 2 10 3 10 4 f (Hz) 10 5
Fig.20 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 100 °C for URdc = 100 V.
2000 Aug 30
26
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 467/468 MKT/MKT 468
296x12(full_width) 10 3 MKT 467/468 AC voltage (V)
CBA811
10
2
10 1
220 nF (lmax = 12.5 mm) 2.2 µF (lmax = 26.0 mm) 5.6 µF (lmax = 30.0 mm) 10 0 10 1 10 2 10 3 10 4 10 5 10 6
f (Hz)
Fig.21 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 250 V.
296x12(full_width) 10 3 MKT 467/468 AC voltage (V)
CBA812
10 2
10 1
220 nF (lmax = 12.5 mm) 10 0 2.2 µF (lmax = 26.0 mm) 5.6 µF (lmax = 30.0 mm) 10 2 10 3 10 4 10 5 f (Hz) 10 6
10 1
Fig.22 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 100 °C for URdc = 250 V.
2000 Aug 30
27
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 467/468 MKT/MKT 468
296x12(full_width) 10 3 AC voltage (V) MKT 467/468
CBA813
10
2
10 1 100 nF (lmax = 12.5 mm) 220 nF (lmax = 17.5 mm) 1.0 µF (lmax = 26.0 mm) 2.2 µF (lmax = 30.0 mm)
10 0 10 1
10 2
10 3
10 4
10 5
f (Hz)
10 6
Fig.23 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 400 V.
296x12(full_width) 10 3 MKT 467/468 AC voltage (V)
CBA814
10 2
10 1 100 nF (lmax = 12.5 mm) 220 nF (lmax = 17.5 mm) 1.0 µF (lmax = 26.0 mm) 2.2 µF (lmax = 30.0 mm) 10 0 10 1 10 2 10 3 10 4 10 5 10 6
f (Hz)
Fig.24 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 100 °C for URdc = 400 V.
2000 Aug 30
28
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 467/468 MKT/MKT 468
296x12(full_width) 10 3 AC voltage (V) MKT 467/468
CBA815
10
2
10 nF (lmax = 12.5 mm) 10 1 100 nF (lmax = 17.5 mm) 220 nF (lmax = 26.0 mm) 470 nF (lmax = 26.0 mm) 820 nF (lmax = 30.0 mm)
10 0 10 1
10 2
10 3
10 4
10 5
f (Hz)
10 6
Fig.25 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 630 V.
296x12(full_width) 10 3 AC voltage (V) MKT 467/468
CBA816
10 2
10 1
10 nF (lmax = 12.5 mm) 100 nF (lmax = 17.5 mm) 470 nF (lmax = 26.0 mm) 820 nF (lmax = 30.0 mm) 10 2 10 3 10 4 10 5 f (Hz) 10 6
10 0 10 1
Fig.26 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 100 °C for URdc = 630 V.
2000 Aug 30
29
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 467/468 MKT/MKT 468
CBA817
296x12(full_width) 10 3 MKT/MKT 468 AC voltage (V)
10 2
10 1
220 nF
10 0 10 1
10 2
10 3
10 4
10 5
f (Hz)
10
6
Fig.27 AC voltage (RMS value) as a function of frequency at Tamb ≤ 85 °C for URdc = 1000 V.
296x12(full_width) 10 3 MKT/MKT 468 AC voltage (V)
CBA950
10 2
10 1
220 nF 10 0 10 1
10 2
10 3
10 4
10 5
f (Hz)
10 6
Fig.28 AC voltage (RMS value) as a function of frequency at 85 °C < Tamb ≤ 100 °C for URdc = 1000 V. Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = ω × C × U ac . Uac is the maximum AC voltage depending on the ambient temperature in Figs 19 to 28.
2000 Aug 30
30
BCcomponents
Product specification
Metallized polyester film capacitors
Tangent of loss angle
MKT 467/468 MKT/MKT 468
296x12(full_width) 10 3 dissipation factor (x 10-4)
CBA087
10 2
10
1
10 2
10 3
10 4
f (Hz)
10 5
Fig.29 Tangent of loss angle as a function of frequency: typical curve.
Insulation resistance
296x12(full_width) 10 5 RC (s)
CBA088
10 4
10 3
10 2 -50
0
50
Tamb (°C)
100
Fig.30 RC product as a function of ambient free air temperature: typical curve.
2000 Aug 30
31
BCcomponents
Product specification
Metallized polyester film capacitors
MKT 467/468 MKT/MKT 468
Maximum allowed component temperature rise (∆T) as a function of the ambient temperature (Tamb)
CBA821
296x12(full_width) 15 ∆T (°C) 10
5
0 -60 -40 -20 0 20 40 60 80 100 Tamb (°C)
Fig.31 Maximum allowed component temperature rise as a function of the ambient temperature.
2000 Aug 30
32
BCcomponents
Product specification
Metallized polyester film capacitors
Heat conductivity (G) as a function of pitch and capacitor body thickness in mW/°C Table 1 Heat conductivity bmax (mm) 10 4.0 4.5 5.0 5.5 6.0 6.5 7.0 7.5 8.0 8.5 9.0 9.5 10.0 10.5 11.0 11.5 12.0 12.5 13.0 13.5 14.0 14.5 15.0 15.5 16.0 4.0 4.5 5.0 6.0 6.0 6.5 − − − − − − − − − − − − − − − − − − − 15 5.0 6.0 6.0 6.5 6.5 8.0 8.0 9.0 9.0 11.0 11.0 12.0 12.0 − − − − − − − − − − − − ORIGINAL PITCH (mm) 22.5 − − 12.0 13.0 13.0 15.0 15.0 17.0 17.0 18.0 18.0 20.0 20.0 22.0 − − − − − − − − − − −
MKT 467/468 MKT/MKT 468
27.5 − − 13.0 15.0 15.0 17.0 17.0 18.0 20.0 20.0 22.0 22.0 23.0 25.0 25.0 27.0 27.0 30.0 30.0 30.0 30.0 33.0 33.0 37.0 37.0
Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. The power dissipation can be calculated according chapter “Introduction”, section “Maximum power dissipation”. The component temperature rise (∆T) can be measured (see section “Measuring the component temperature” for more details) or calculated by ∆ T = P ⁄ G : • ∆T = component temperature rise (°C). • P = power dissipation of the component (mW). • G = heat conductivity of the component (mW/°C).
2000 Aug 30
33
BCcomponents
Product specification
Metallized polyester film capacitors
Measuring the component temperature A thermocouple must be attached to the capacitor body as in Fig.32.
MKT 467/468 MKT/MKT 468
144x12(halfpage) thermocouple
CBA771
Fig.32 Mounting the thermocouple.
The temperature is measured in unloaded (Tamb) and maximum loaded condition (Tc). The temperature rise is given by ∆ T = T c – T amb . To avoid radiation or convection, the capacitor should be tested in a wind-free box.
2000 Aug 30
34
BCcomponents
Product specification
Metallized polyester film capacitors
Application note and limiting conditions
MKT 467/468 MKT/MKT 468
These capacitors are not suitable for mains applications as across-the-line capacitors without additional protection, as described hereunder. These mains applications are strictly regulated in safety standards and therefore electromagnetic interference suppression capacitors conforming the standards must be used. To select the capacitor for a certain application, the following conditions must be checked: 1. The peak voltage (Up) shall not be greater than the rated DC voltage (URdc). 2. The peak-to-peak voltage (Up-p) shall not be greater than the maximum Up-p to avoid the ionisation inception level. 3. The voltage pulse slope (dU/dt) shall not exceed the rated voltage pulse slope in an RC-circuit at rated voltage and without ringing. If the pulse voltage is lower than the rated DC voltage, the rated voltage pulse slope may be multiplied by URdc and divided by the applied voltage. For all other pulses following equation must be fulfilled:
T
dU dU 2 × ∫ ------- × dt < U Rdc × ------- dt rated dt
0
2
T is the pulse duration. The rated voltage pulse slope is valid for ambient temperatures up to 85 °C. For higher temperatures a derating factor of 3% per K shall be applied. 4. The maximum component surface temperature rise must be lower than the limits in Fig.31. 5. Since in circuits used at voltages over 280 V peak-to-peak the risk for an intrinsically active flammability after a capacitor breakdown (short circuit) increases, it is recommended that the power to the component is limited to 100 times the values mentioned in Table 1 “Heat conductivity”. 6. When using these capacitors as across-the-line capacitor in the input filter for mains applications or as series connected with an impedance to the mains the applicant must guarantee that following conditions are fulfilled in any case (spikes and surge voltages from the mains included): VOLTAGE CONDITIONS FOR 6 ABOVE ALLOWED VOLTAGES Maximum continuous RMS voltage Maximum temporary RMS -overvoltage (
