MR40D-12S05-UM

MR40D-12S05-UM

  • 厂商:

    ETC2

  • 封装:

  • 描述:

    MR40D-12S05-UM - DC/DC converters MISTRAL Series MR40, MR40-T - List of Unclassifed Manufacturers

  • 详情介绍
  • 数据手册
  • 价格&库存
MR40D-12S05-UM 数据手册
D C/DC converters MISTRAL Series MR40, MR40-T BKJU.436610.011 Ordering information MR 40 D – 24 S 12 U T - Mistral Series - Maximum output power, W (limiting capacity is designated on the case for the given standard size, stipulated at the order) - Voltage transformation class D – DC/DC - Nominal input voltage 12 (10,5…18) VDC 24 VDC(18…36) VDC 27 VDC(17…36) VDC 48 VDC(36…75) VDC - Output channels quantity S – one D – two - Nominal output voltage, VDC (two numbers on channel) - Embodiment U - reinforced aluminium frame with flanges - Operating temperature range M - -60°С…+85°С T - -60°С…+125°С • Completely replace power-supply modules MDM30-P series on dimensions and purpose of conclusions and have the improved characteristics • Working temperature range from -60°C to +125°C • Single and dual-output models • Output voltage regulation • Short circuit protection, overvoltage and thermal protection • Remote on/off • Coefficient of efficiency 82% • Small size, low-profile • Metal case • Cooling by free air convection or a heat sink using • Galvanic isolated outputs Single-output models Module MR40D-12S05-UM MR40D-12S15-UM MR40D-12S24-UM MR40D-12S27-UM MR40D-24S05-UM MR40D-24S15-UM MR40D-24S24-UM MR40D-24S27-UM MR40D-27S05-UM MR40D-27S15-UM MR40D-27S24-UM MR40D-27S27-UM MR40D-48S05-UM MR40D-48S15-UM MR40D-48S24-UM MR40D-48S27-UM 36…75 VDC 40 W 17…36(80) VDC 40 W 18…36(40) VDC 40 W 10,5…18 VDC 40 W Input voltage range Output power Output voltage 5 VDC 15 VDC 24 VDC 27 VDC 5 VDC 15 VDC 24 VDC 27 VDC 5 VDC 15 VDC 24 VDC 27 VDC 5 VDC 15 VDC 24 VDC 27 VDC Maximal output current 8A 2,67 A 1,67 A 1,48 A 8A 2,67 A 1,67 A 1,48 A 8A 2,67 A 1,67 A 1,48 A 8A 2,67 A 1,67 A 1,48 A Dual-output models Module MR40D-12D0512-UM MR40D-12D0515-UM MR40D-12D1515-UM MR40D-24D0512-UM MR40D-24D0515-UM MR40D-24D1515-UM MR40D-27D0512-UM MR40D-27D0515-UM MR40D-27D1515-UM MR40D-48D0512-UM MR40D-48D0515-UM MR40D-48D1515-UM 36…75 VDC 40 W 17…36(80) VDC 40 W 18…36(40) VDC 40 W 10,5…18 VDC 40 W Input voltage range Output power Output voltage 5 VDC / 12 VDC 5 VDC / 15 VDC 15 VDC / 15 VDC 5 VDC / 12 VDC 5 VDC / 15 VDC 15 VDC / 15 VDC 5 VDC / 12 VDC 5 VDC / 15 VDC 15 VDC / 15 VDC 5 VDC / 12 VDC 5 VDC / 15 VDC 15 VDC / 15 VDC Maximal output current 4 A / 1,67 A 4 A / 1,33 A 1,33 A / 1,33 A 4 A / 1,67 A 4 A / 1,33 A 1,33 A / 1,33 A 4 A / 1,67 A 4 A / 1,33 A 1,33 A / 1,33 A 4 A / 1,67 A 4 A / 1,33 A 1,33 A / 1,33 A By request can be delivered modules with non-standard output voltage 3 to 80VDC and with maximal output current to 8А. http://www.aeps-group.com e-mail: aeps@aeps-group.com tel/fax: +420-266-107-609 According to company politics in view of constant improvements production design the manufacturer reserves the right to itself without the prior notification to change the contents of present help materials. © "Alexander Eleсtriс holding". All rights reserved. 31.03.2008 http://www.aeps-group.com e-mail: alexdon@vmail.ru tel/fax (4732) 519-518 D C/DC converters MISTRAL Series MR40, MR40-T Technical specifications according to BKJU.436610.011 Input voltage range/ transitional deviation, 1 sec Input specifications 12 VDC 24 VDC 27 VDC 48 VDC Input filter 10,5…18VDC/ 10,5…18VDC 18…36VDC/17..37,8VDC 17…36VDC/17…80VDC 36…75VDC/36…84VDC P-type ±5% Output specifications Output voltage trimming range (for single-, dual-output execution with same voltage) Output voltage total instability - for single-output execution (Inom 10 – 100%) - for multi-output execution (Inom 10 – 100%) - for multi-output execution with distinction voltage ≥20% ±4% ±6% ±4% ±6% ±4% ±6% (index “M”) (index “T”) for out1 ±7% for out2 (index “M”) for out1 ±10% for out2 (index “T”) for out1 ±14% for out2&3 (index “M”) for out1 ±14% for out2&3 (index “T”) Pulsations ripple (peak-to-peak) Overload protection level** Short circuit protection level** Overvoltage protection level** Remote on/off 120% Iout.nom. >150 % Iout.nom., autorepair >120 % Uout.nom. Off: 0…1,1VDC or connection of output «ON» and «- IN», I≤5 mA – – – – 60 60 60 60 °C…+85 °C °C…+125 °C °C…+85 °C °C…+125 °C (index “M”) (index “T”) (index “M”) (index “T”) General specifications - high working of case Temperature - storage 1 See diagram (red, green lines) - power loss (free air convection) Without power loss with radiator use (provided that Тcase. The module does not exceed the maximal value) see blue curve Efficiency Thermal resistance case - environment 82 % 7,8 ºС/Watt Conversion frequency Isolation - voltage in/out: in/case: out/case: Insulation resistance @ 500VDC 150 kHz ~ 355 VDC, 50 Hz ≥20 Ohm 100% @ 35°С EN 55022, class A IEC/ EN 60950 > 2 400 000 hours @ +25°C Free air convection or heat sink using Metal External factors stability - high humidity EMC standard Safety standard Time to failure Cooling Case material All specifications are reduced for normal climatic conditions, Uin.nom, Iout.nom, if it is not specified differently. Parameters are help and cannot be used at long-term work, excess of the maximal target current, at work outside of a range of working temperatures, at work of the module with target voltage over a range of adjustment Power loss diagram (index «М») Power loss diagram (index «Т») MR40-T В ыOutput я м о щ н о с т ь , В т х о д н а power, W 25 20 15 10 5 0 Free air convection coefficient of efficiency 84% Output power, W 50 45 40 35 30 MR40 Heat sink Heat sink Free air convection coefficient of efficiency 80% Free air convection coefficient of efficiency 80% Free air convection coefficient of efficiency 84% -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient temperature Tamb, Т Т емпература о кружающей с реды°Cокр, С Ambient temperature Tamb, °C * The inclined site of a red and green curve specifies that the module works in a mode with maximal Тcase (index «М» +85ºС; index «Т» +125 ºС). Output settings № pin Single-output Dual-output 1 Case. Case. 2 + in + in 3 - in - in 4 On/off On/off 5 + out + out 1 6 - out + out 2 7 Trim. - out 2 8 - out 1 http://www.aeps-group.com e-mail: aeps@aeps-group.com tel/fax: +420-266-107-609 According to company politics in view of constant improvements production design the manufacturer reserves the right to itself without the prior notification to change the contents of present help materials. © "Alexander Eleсtriс holding". All rights reserved. 31.03.2008 http://www.aeps-group.com e-mail: alexdon@vmail.ru tel/fax (4732) 519-518 D C/DC converters MISTRAL Series MR40, MR40-T МR40-S case with flanges МR40-D case with flanges http://www.aeps-group.com e-mail: aeps@aeps-group.com tel/fax: +420-266-107-609 According to company politics in view of constant improvements production design the manufacturer reserves the right to itself without the prior notification to change the contents of present help materials. © "Alexander Eleсtriс holding". All rights reserved. 31.03.2008 http://www.aeps-group.com e-mail: alexdon@vmail.ru tel/fax (4732) 519-518
MR40D-12S05-UM
1. 物料型号: - 单路输出型号:MR40D-12S05-UM, MR40D-12S15-UM, MR40D-12S24-UM, 等等。 - 双路输出型号:MR40D-12D0512-UM, MR40D-12D0515-UM, MR40D-12D1515-UM, 等等。

2. 器件简介: - Mistral Series MR40和MR40-T是DC/DC转换器模块,可提供高达40W的输出功率,工作温度范围从-60°C到+125°C,具有单路和双路输出型号。

3. 引脚分配: - 单路输出模块引脚:1号引脚为外壳,2号引脚为开/关控制,3号和后续引脚为输出(out)。 - 双路输出模块引脚:1号引脚为外壳,2号引脚为开/关控制,3号引脚为输出1(out 1),其他引脚未明确说明。

4. 参数特性: - 输入电压范围:12VDC(10.5...18VDC)、24VDC(18...36VDC/17..37.8VDC)、27VDC(17...36VDC/17...80VDC)、48VDC(36...75VDC/36...84VDC)。 - 输出电压:5VDC、12VDC、15VDC、24VDC、27VDC。 - 最大输出电流:单路输出8A,双路输出分别为4A和1.67A。 - 效率:82%。 - 隔离电压:输入/输出、输入/外壳、输出/外壳的隔离电压均符合标准。 - 工作温度范围:M型-60°C...+85°C,T型-60°C...+125°C。

5. 功能详解: - 这些模块具备短路保护、过压保护和热保护功能。 - 支持远程开/关功能。 - 提供小尺寸、低剖面设计。 - 封装采用加强型铝框带法兰。

6. 应用信息: - 模块适用于需要高功率密度和宽工作温度范围的应用场合。

7. 封装信息: - 提供MR40-S(单路输出)和MR40-D(双路输出)两种带法兰的金属外壳封装。
MR40D-12S05-UM 价格&库存

很抱歉,暂时无法提供与“MR40D-12S05-UM”相匹配的价格&库存,您可以联系我们找货

免费人工找货