0
登录后你可以
  • 下载海量资料
  • 学习在线课程
  • 观看技术视频
  • 写文章/发帖/加入社区
会员中心
创作中心
发布
  • 发文章

  • 发资料

  • 发帖

  • 提问

  • 发视频

创作活动
MR40D-24S05-UM

MR40D-24S05-UM

  • 厂商:

    ETC2

  • 封装:

  • 描述:

    MR40D-24S05-UM - DC/DC converters MISTRAL Series MR40, MR40-T - List of Unclassifed Manufacturers

  • 详情介绍
  • 数据手册
  • 价格&库存
MR40D-24S05-UM 数据手册
D C/DC converters MISTRAL Series MR40, MR40-T BKJU.436610.011 Ordering information MR 40 D – 24 S 12 U T - Mistral Series - Maximum output power, W (limiting capacity is designated on the case for the given standard size, stipulated at the order) - Voltage transformation class D – DC/DC - Nominal input voltage 12 (10,5…18) VDC 24 VDC(18…36) VDC 27 VDC(17…36) VDC 48 VDC(36…75) VDC - Output channels quantity S – one D – two - Nominal output voltage, VDC (two numbers on channel) - Embodiment U - reinforced aluminium frame with flanges - Operating temperature range M - -60°С…+85°С T - -60°С…+125°С • Completely replace power-supply modules MDM30-P series on dimensions and purpose of conclusions and have the improved characteristics • Working temperature range from -60°C to +125°C • Single and dual-output models • Output voltage regulation • Short circuit protection, overvoltage and thermal protection • Remote on/off • Coefficient of efficiency 82% • Small size, low-profile • Metal case • Cooling by free air convection or a heat sink using • Galvanic isolated outputs Single-output models Module MR40D-12S05-UM MR40D-12S15-UM MR40D-12S24-UM MR40D-12S27-UM MR40D-24S05-UM MR40D-24S15-UM MR40D-24S24-UM MR40D-24S27-UM MR40D-27S05-UM MR40D-27S15-UM MR40D-27S24-UM MR40D-27S27-UM MR40D-48S05-UM MR40D-48S15-UM MR40D-48S24-UM MR40D-48S27-UM 36…75 VDC 40 W 17…36(80) VDC 40 W 18…36(40) VDC 40 W 10,5…18 VDC 40 W Input voltage range Output power Output voltage 5 VDC 15 VDC 24 VDC 27 VDC 5 VDC 15 VDC 24 VDC 27 VDC 5 VDC 15 VDC 24 VDC 27 VDC 5 VDC 15 VDC 24 VDC 27 VDC Maximal output current 8A 2,67 A 1,67 A 1,48 A 8A 2,67 A 1,67 A 1,48 A 8A 2,67 A 1,67 A 1,48 A 8A 2,67 A 1,67 A 1,48 A Dual-output models Module MR40D-12D0512-UM MR40D-12D0515-UM MR40D-12D1515-UM MR40D-24D0512-UM MR40D-24D0515-UM MR40D-24D1515-UM MR40D-27D0512-UM MR40D-27D0515-UM MR40D-27D1515-UM MR40D-48D0512-UM MR40D-48D0515-UM MR40D-48D1515-UM 36…75 VDC 40 W 17…36(80) VDC 40 W 18…36(40) VDC 40 W 10,5…18 VDC 40 W Input voltage range Output power Output voltage 5 VDC / 12 VDC 5 VDC / 15 VDC 15 VDC / 15 VDC 5 VDC / 12 VDC 5 VDC / 15 VDC 15 VDC / 15 VDC 5 VDC / 12 VDC 5 VDC / 15 VDC 15 VDC / 15 VDC 5 VDC / 12 VDC 5 VDC / 15 VDC 15 VDC / 15 VDC Maximal output current 4 A / 1,67 A 4 A / 1,33 A 1,33 A / 1,33 A 4 A / 1,67 A 4 A / 1,33 A 1,33 A / 1,33 A 4 A / 1,67 A 4 A / 1,33 A 1,33 A / 1,33 A 4 A / 1,67 A 4 A / 1,33 A 1,33 A / 1,33 A By request can be delivered modules with non-standard output voltage 3 to 80VDC and with maximal output current to 8А. http://www.aeps-group.com e-mail: aeps@aeps-group.com tel/fax: +420-266-107-609 According to company politics in view of constant improvements production design the manufacturer reserves the right to itself without the prior notification to change the contents of present help materials. © "Alexander Eleсtriс holding". All rights reserved. 31.03.2008 http://www.aeps-group.com e-mail: alexdon@vmail.ru tel/fax (4732) 519-518 D C/DC converters MISTRAL Series MR40, MR40-T Technical specifications according to BKJU.436610.011 Input voltage range/ transitional deviation, 1 sec Input specifications 12 VDC 24 VDC 27 VDC 48 VDC Input filter 10,5…18VDC/ 10,5…18VDC 18…36VDC/17..37,8VDC 17…36VDC/17…80VDC 36…75VDC/36…84VDC P-type ±5% Output specifications Output voltage trimming range (for single-, dual-output execution with same voltage) Output voltage total instability - for single-output execution (Inom 10 – 100%) - for multi-output execution (Inom 10 – 100%) - for multi-output execution with distinction voltage ≥20% ±4% ±6% ±4% ±6% ±4% ±6% (index “M”) (index “T”) for out1 ±7% for out2 (index “M”) for out1 ±10% for out2 (index “T”) for out1 ±14% for out2&3 (index “M”) for out1 ±14% for out2&3 (index “T”) Pulsations ripple (peak-to-peak) Overload protection level** Short circuit protection level** Overvoltage protection level** Remote on/off 120% Iout.nom. >150 % Iout.nom., autorepair >120 % Uout.nom. Off: 0…1,1VDC or connection of output «ON» and «- IN», I≤5 mA – – – – 60 60 60 60 °C…+85 °C °C…+125 °C °C…+85 °C °C…+125 °C (index “M”) (index “T”) (index “M”) (index “T”) General specifications - high working of case Temperature - storage 1 See diagram (red, green lines) - power loss (free air convection) Without power loss with radiator use (provided that Тcase. The module does not exceed the maximal value) see blue curve Efficiency Thermal resistance case - environment 82 % 7,8 ºС/Watt Conversion frequency Isolation - voltage in/out: in/case: out/case: Insulation resistance @ 500VDC 150 kHz ~ 355 VDC, 50 Hz ≥20 Ohm 100% @ 35°С EN 55022, class A IEC/ EN 60950 > 2 400 000 hours @ +25°C Free air convection or heat sink using Metal External factors stability - high humidity EMC standard Safety standard Time to failure Cooling Case material All specifications are reduced for normal climatic conditions, Uin.nom, Iout.nom, if it is not specified differently. Parameters are help and cannot be used at long-term work, excess of the maximal target current, at work outside of a range of working temperatures, at work of the module with target voltage over a range of adjustment Power loss diagram (index «М») Power loss diagram (index «Т») MR40-T В ыOutput я м о щ н о с т ь , В т х о д н а power, W 25 20 15 10 5 0 Free air convection coefficient of efficiency 84% Output power, W 50 45 40 35 30 MR40 Heat sink Heat sink Free air convection coefficient of efficiency 80% Free air convection coefficient of efficiency 80% Free air convection coefficient of efficiency 84% -60 -50 -40 -30 -20 -10 0 10 20 30 40 50 60 70 80 90 Ambient temperature Tamb, Т Т емпература о кружающей с реды°Cокр, С Ambient temperature Tamb, °C * The inclined site of a red and green curve specifies that the module works in a mode with maximal Тcase (index «М» +85ºС; index «Т» +125 ºС). Output settings № pin Single-output Dual-output 1 Case. Case. 2 + in + in 3 - in - in 4 On/off On/off 5 + out + out 1 6 - out + out 2 7 Trim. - out 2 8 - out 1 http://www.aeps-group.com e-mail: aeps@aeps-group.com tel/fax: +420-266-107-609 According to company politics in view of constant improvements production design the manufacturer reserves the right to itself without the prior notification to change the contents of present help materials. © "Alexander Eleсtriс holding". All rights reserved. 31.03.2008 http://www.aeps-group.com e-mail: alexdon@vmail.ru tel/fax (4732) 519-518 D C/DC converters MISTRAL Series MR40, MR40-T МR40-S case with flanges МR40-D case with flanges http://www.aeps-group.com e-mail: aeps@aeps-group.com tel/fax: +420-266-107-609 According to company politics in view of constant improvements production design the manufacturer reserves the right to itself without the prior notification to change the contents of present help materials. © "Alexander Eleсtriс holding". All rights reserved. 31.03.2008 http://www.aeps-group.com e-mail: alexdon@vmail.ru tel/fax (4732) 519-518
MR40D-24S05-UM
### 物料型号 - MR40D-24S12UT:这是一个具体的型号,表示MISTRAL系列中的一个特定产品。

### 器件简介 - MISTRAL系列MR40和MR40-T是DC/DC转换器,具有不同的输入电压范围和输出电压规格。它们旨在完全替代MDM30-P系列的电源模块,具有改进的特性,包括更高的工作温度范围(-60°C至+125°C)、单双输出模型、短路保护、过压和热保护等。

### 引脚分配 - 单输出:引脚1为外壳,引脚2为开/关控制,引脚3和引脚4为输出。 - 双输出:引脚1为外壳,引脚2为开/关控制,引脚3为输出1,引脚4为输出2。

### 参数特性 - 输入电压范围:根据不同型号,输入电压范围从10.5VDC至48VDC不等。 - 输出功率:最高可达40W。 - 输出电压:单输出和双输出模型提供不同的输出电压选项,如5VDC、12VDC、15VDC、24VDC和27VDC。 - 最大输出电流:单输出模型可达8A,双输出模型则根据具体型号有所不同。

### 功能详解 - 这些转换器提供远程开/关功能,效率高达82%,具有小尺寸、低轮廓设计,并采用加强型铝制框架。它们还具有短路保护、过压保护和热保护功能。

### 应用信息 - 这些转换器适用于需要高效率、高可靠性和宽温度范围的应用场合。

### 封装信息 - 提供了MR40-S和MR40-D两种带法兰的金属外壳封装。
MR40D-24S05-UM 价格&库存

很抱歉,暂时无法提供与“MR40D-24S05-UM”相匹配的价格&库存,您可以联系我们找货

免费人工找货