MX34005UF1

COMPONENTS PRODUCT INFORMATION NEW Compact Automotive Connectors for PCB-to-Cable Applications CONNECTOR MB-0175-1 MX34 Series (for Low Pin Counts) RoHS　Compliant October 2007 Compact, single row type connectors have been developed to add to the existing line of MX34 Series connectors for automobiles. The available pin counts are 3, 5 and 7 positions, available in straight and angle pin header type. (Straight type is available in 5 and 7 positions) Hook pins are placed on both sides for easier board attachment. An 8 position, double row type has also been developed. Features •Compact, single row PCB-to-cable connector with 2.2 mm horizontal pitch. (8 pos. is available in double row, 2.4mm pitch) •Hook pins are placed on both sides for easier board attachment. •Socket contact with box-type pin header is durable in external forces; contact is highly resistant to twisting and equipped with a proven double leaf spring. (In common with MX34 Series double row type) • Adoption of a preset-type retainer facilitates easy wire harness operation. If retainer is not completely inserted in housing, the connector is not engaged, and incomplete contact insertion is detected. •Lock spring is equipped with a bridge protecting the contacts from external load. General Specifications •No. of contacts: Single row 3, 5, 7 pos. Double row 8 pos. •Contact resistance: 5m ohm max. (initial) •Dielectric withstanding voltage: AC 1000V (per minute) •Operating temperature: -40 Deg. C to +85 Deg. C JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. •Rated current: 3A •Insulation resistance: 100M ohm min •Durability: 50 times •Applicable wire: Please refer to next page 1/6 MB-0175-1 Materials and Finishes •Socket Connector Components Socket housing Retainer •Pin Connector Materials and Finishes PPE+PA66 (ALLOY) PPE+PA66 (ALLOY) Components Pin insulator Pin contact Hook pin •Socket Contact Materials and Finishes SPS GF 30 Brass/Sn plating Copper alloy/Sn plating Components Socket contact Materials and Finishes Highly conductive material/ Sn plating Applicable Wire Part Number M34S75C4F1 M34S75C4F2 M34S75C4F3 M34S75C4F4 Applicable Wire 2 AVSS0.3mm , 2 2 CHFUS0.22mm ~0.35mm 2 AVSS0.5mm , 2 2 CHFUS0.5mm ~0.75mm 2 CAN　SD　0.35mm (note1) 2 AVSS0.85mm (note1) SJ Drawing SJ038527 SJ038528 SJ038747 SJ038893 Note 1: M34S75CF3 and M34S75CF4 can only be inserted in double row cavities on both sides, two housing cavities in total. (8 position type can be inserted in any area.) Crimp Tool Part Number M34S75C4F1 M34S75C4F2 M34S75C4F3, 4 Hand Crimp Tool Semi Automatic Applicator Automatic Applicator CT150-2-MX34 350-MX34D-2 350-MX34D-3B CT150-1-MX34 -------350-MX34C-2 350-MX34C-3B Withdrawal Tool ET-MX34-1 JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. 2/6 MB-0175-1 Outside Dimension •Socket housing No. Diameter of each area Part Number SJ Drawing of A B 3 MX34003SF1 SJ100823 4.4 10.8 5 MX34005SF1 SJ100825 8.8 15.2 7 MX34007SF1 SJ104416 13.2 19.6 •Socket contact 1. M34S75C4F1, F2 2. M34S75C4F3, F4 JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. 3/6 MB-0175-1 •Angle pin header No. of pos. 3 5 7 Part Number SJ Drawing A MX34003NF1 SJ100824 MX34005NF1 SJ100826 MX34007NF1 SJ104514 4.4 8.8 13.2 B Diameter of each area C 13.2 17.8 22.2 D 15.8 20.4 24.8 E 3.9 8.5 12.9 F 7.8 12.4 16.8 13.8 18.4 22.8 JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. 4/6 MB-0175-1 •Straight pin header No. of Part Number SJ Drawing pos. 5 MX34005UF1 SJ104369 7 MX34007UF1 SJ104370 Diameter of each area A 8.8 13.2 B 17.8 22.2 C 18.4 22.8 D 20.4 24.8 E 11.3 15.7 F 12.3 16.7 Note 1: 3 position not available for straight pin header JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. 5/6 MB-0175-1 Shape of double row 8 position type •Angle pin header (MX34E08NF1) SJ Drawing: SJ106197 JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. 6/6 MB-0175-1 Shape of double row 8 position type •Socket housing (MX34E08SF1) SJ Drawing: SJ106203 Others Specification Specification Handling Instructions Handling Instructions JACS-1754 Notice: Products shown in this leaflet are JACS-1754 made for the applications listed below. However, if the above-mentioned products are to be used in aerospace devices, marine cable-connection devices, atomic power control systems, medical equipment for life-support systems, or any other specific application requiring extremely high reliability, please contact JAE for further information. Recommended applications: Computers, Office machines, Measuring devices, Telecommunication devices (Terminals, Mobile devices), AV devices, Household applications, FA devices, etc. Japan Aviation Electronics Industry, Limited Product Marketing Division Aobadai Building, 3-1-19, Aobadai, Meguro-ku, Tokyo 153-8539 Phone: +81-3-3780-2787 FAX: +81-3-3780-2946 * The specifications in this brochure are subject to change without notice. Please contact JAE for information. JAE PMK Div. Proprietary. Copyright © 2007，Japan Aviation Electronics Industry, Ltd. 7/6