NEPORT

NePort™ Hardware Manual Conextop Technologies Co., Ltd. All rights reserved 1 Disclaimer Copyright ©2003 Conextop, Inc. All rights reserved. Conextop,NePort,with its patent-pending technology, and neChip are trNePortmarks of Conextop. All other trademarks are the property of their respective owners. Contacts Conextop Ltd. Room 608, 6/F, Electric Building, High-tech Park, Nanshan, Shenzhen, China Phone: 86-755-26505615 Fax: 86-755-26505565 Technical Support Online: www.conextop.com/aboutus/contactus.htm Sales Offices For a current list of our domestic and international sales offices, go to the Conextop web site at www.conextop.com 2 Contents NePort Overview..................................................................................4 1. Features： ............................................................................................................................. 4 2. Product Character ： ........................................................................................................... 4 NePort Hardware Description.............................................................6 1. NePort Internal Structure ...................................................................................................... 6 2. NePort Internal Circuit.......................................................................................................... 6 3. PCB Interface........................................................................................................................ 6 4. Ethernet Interface ............................................................................................................... 9 5. Status Leds .......................................................................................................................... 9 6. Capsulation........................................................................................................................ 10 7. PCB Layout ....................................................................................................................... 10 8． Product Mark................................................................................................................... 12 9．Performance Guide ........................................................................................................... 12 10． Evaluation Kit ............................................................................................................... 13 3 NePort Overview C onextop Technologies target at providing the most reliable and security M2M solution for the worldwide customers, and NePort is the most compact serial-IP module released in 2002, which has embedded all in a standard RJ45 connector, Neport is powered by our network processor SoC(Nechip), which includes a 10/100 MAC/PHY and 256 KB of SRAM on chip. It features a built-in web server for communications with a device via a standard Internet browser. Web capability can be used for remote configuration, real-time monitoring or troubleshooting. Neport has 512 KB of on-chip Flash for web pages and software upgrades. It acts as a dedicated co-processor that optimizes network activities permitting the host microprocessor to function at maximum efficiency. 1. Features： ◆ E mbed Web Server Support update customized web ◆ E mbed Telnet Server ◆ P rovide RS232/422/485 signals.Can communicate with any devices with serial port ◆ P ort buffer for every serial port ◆ High efficient Device Management and Trouble shoot tools ◆ All parameters can be configured through internal web server ◆ Provide serial login mode and configure system through serial port ◆ Telnet server enables remote management ◆ E mail Alarm and data encryption 2 . Product Character ： ◆ The most compact size, High intefration compatible with standard RJ45 connector ◆ High Performance, High Reliability, Industrial Temerature ◆ 32bits RISC NP7 series ARM7TDMI 55DMIPS ◆ 1 28KB SRAM (EN： 256KB SRAM) 256KB/512KB Code + 32KB Boot ◆ 1 0/100Mbps Ethernet Interface (Auto sensing) ） ◆ Provide 1-3 high speed serial ports ◆ S erial Port: selectable Data bite 5.6.7.8 bits ◆  S erial Port: selectable stop bite 1， 2 bits ◆  Baud rate: 110 – 460800bps 110 – 9 21600bps (EN Version) ◆  P rovide RS485/422 controller ◆  S mart/High reliability networking stacks: (NeChip NP7 series) 4 E TH、 ARP、 IP 、 UDP、 TCP、 ICMP、 PING、 BOOTP 、 AutoIP 、 DHCP、 SNTP 、 POP3、 SMTP 、 TFTP 、 DNS、 TELNET、 HTTP 、 PPP/PPPoE SSH、 SSL/TLS 、 HTTPS （ EN Optional） ◆  E mbedded Web Server, support update customized webs ◆  E mail Alarm according to the triggers（ EN Optional） ◆  Data Encryption: 128-,192-,256bit AES / Tri-DES (Optional) ◆  M ultiplex communication modes: TCP Server/client, UDP Uni-cast/Multi-cast modes ◆ Provide two programmable I/O ◆ S upport Windows 95/98/ME/NT/2000/XP/2003/XP x64/2003 x64 COM driver 、 Linux real、 TTY、 UNIX ◆ O peration Voltage: 3.14~3.6 VDC ◆ Low Power Consumption: 110 – 1 55mA @ 3.3V ◆ S upport POE ◆ 1.5KV electromagnetism isolation ◆ All pins support anti-static protection ◆  O peration Temperature 0 ° C to +70 ° C (32 ° F to 158 ° F) ， 5% to 95% RH （ Commercial Model ） - 40 ° C to +80 ° C (-40 ° F to 176 ° F) ， 5% to 95% RH (Industrial Model) ◆  Storage Temperature - 40 ° C to +80 ° C (-40 ° F to 176 ° F) ， 5% to 95% RH 5 NePort Hardware Description 1. NePort Internal Structure NePort Integrate nechip,PHY,OSC,Reset and power circuit. Chart2-1. Internal Structure 2. NePort Internal Circuit Chart2-2. Function Circuit 3. PCB Interface NePort can provide up to three high speed serial ports with standard CMOS signals which can tolerate 5V TTL signals. In the real application, neport’s serial port directly connect to the local CPU(or other processor) , then user devices can connect to Ethernet through neport now,serial data from local cpu will be sent to neport,and neport will convert the data from serial port to Ethernet according to the networking configuration 6 NePort Series include –POE,-L,-R,-EN versions, this doc just descript the standard version of neport. NePort series with 8 pins Chart2-1. Valid for NePort-L 、NePort-R and the other versions with 8 pins PinNum 1 2 3 4 5 6 Pin Name GND VDD RESET TXD RXD IO/RTS Type Power Power Input Output Input I/O Description Ground Power Input (+3.3V ) Low level to reset ( 5V tolerant ) Serial port: Data Output(5V tolerant ) Serial port: Data Input(5V tolerant ) Programmable I/O with multiplex Function:( 5V tolerant ) 1.RTS( Request to Send): Output, Hardware Flow Control 2.IO(input/output): Can be configured by web or device manager ( Only for special models) 3.TCP Connection Status， Invalid when hardware flow control is enabled 4. System status ,Invalid when hardware flow control is enabled 5. RS-485/RS422 Controller 7 Default Input tolerant ) (RS422: Low level) Low level valid,Force to load factory setting( 5V Keep this pin be low level for more than 5 seconds,NePort will be forced to load the factory setting and automatically reboot system 8 IO/CTS I/O Programmable I/O with multiplex Function:( 5V tolerant ) 1.RTS( Request to Send): InPut, Hardware Flow Control 2.IO(input/output): Can be configured by web or device manager ( Only for special models) 3.TCP Connection Status， Invalid when hardware flow control is enabled 4. System status ,Invalid when hardware flow control is enabled 5. RS-422 Controller: High Level Mark: 1. Place a 10uF capacitor between power and ground, and had better be close to NePort. 2. Should not connect upload resistance on Reset pin( Pin 3 ). 3. Recommend to connect upload resistance on RTS and CTS pin when uart work under rs232 mode 4. Recommend to connect download resistance on RTS and CTS pin when uart work under rs485/422 mode 7 10Pin Model of Neport Series Chart2-2. Valid for NePort 、NePort-EN Series PinNum 1 Pin Name IO/CTS RXD2 Type Bid Description Programmable I/O with multiplex Function:( 5V tolerant ) 1.RTS( Request to Send): InPut, Hardware Flow Control 2.IO(input/output): Can be configured by web or device manager ( Only for special models) 3.TCP Connection Status， Invalid when hardware flow control is enabled 4. System status ,Invalid when hardware flow control is enabled 5. RS-422 Controller: High Level 6.UART2 TXD 2 3 4 5 6 7 GND VDD RESET TXD1 RXD1 IO/RTS TXD2 Power Power Input Output Input Bid Ground Power Input (+3.3V ) Low level to reset ( 5V tolerant ) Serial port: Data Output(5V tolerant ) Serial port: Data Input(5V tolerant ) Programmable I/O with multiplex Function:( 5V tolerant ) 1.RTS( Request to Send): Output, Hardware Flow Control 2.IO(input/output): Can be configured by web or device manager ( Only for special models) 3.TCP Connection Status， Invalid when hardware flow control is enabled 4. System status ,Invalid when hardware flow control is enabled 5. RS-485/RS422 Controller 6.UART2 TXD 8 Default Input tolerant ) (RS422: Low level) Low level valid,Force to load factory setting( 5V Keep this pin be low level for more than 5 seconds,NePort will be forced to load the factory setting and automatically reboot system 9 IO/P+ TXD3 Bid 1. IO(input/output): Can be configured by web or device manager ( Only for special models) 2. Anode output Of PoE 3. UART3 TXD 10 IO/P+ RXD3 Bid 1. IO(input/output): Can be configured by web or device manager ( Only for special models) 2. Cathode output of PoE 3. UART3 RXD 8 Mark:: 1. Place a 10uF capacitor between power and ground, and had better be close to NePort 2. Should not connect upload resistance on Reset pin( Pin 3 ) 3. Recommend to connect upload resistance on RTS and CTS pin when uart work under rs232 mode 4. Recommend to connect download resistance on RTS and CTS pin when uart work under rs485/422 mode 5. 8Pin Models are compatible with 10Pin models of NePort Series except CTS、P+、Psignals。 4 . Ethernet Interface NePort has integrated Ethernet transformer,RJ45 connector and status leds Chart2-3. Signal TX+ TXRX+ RXNot used Not used Not used Not used SHIELD Standard Ethernet signals(Industrial Starndard) Pin Num 1 2 3 6 4 5 7 8 Shield (Connect to Ground) 2KV electromagnetism Isolation Mark: Please refer to Sheet2-4 for detailed pin description of RJ45 connector Function Description Transmit signal: Positive Transmit signal: cathode Receive signal: Positive Receive signal: cathode Mark Type Output Output Input Input 5 . Status Leds N ePort includes the follow status leds ◆ ◆ LINK（ Green, Left Led） ACT（ Yellow， Right Led） C hart2-3. NePort Front View (Led) Left Led Pin 8 Shield(GND) Right Led Pin 1 Shield(GND) 9 S heet2-4.Description of status leds LINK LED （ Left） Status ON OFF(Flash) Description Link is normal Cable dropped / Link disconnected Status Flash OFF ACT LED （ Right） Description Transceive Ethernet packets No data flow 6 . Capsulation N ePort Shell as below: Chart2-5. Bottom View mm Dim A B 9 Min 10.78 Typ 10.80 11.43 6.35 2.54 2.54 1.27 Max 10.96 C D 2 7- 5- 3 -1 E F G H I 37.92 3.10 2.80 38.20 3.15 2.85 38.50 3.20 2.90 Chart2-6. Side View mm Fixed Shield Pin Dim A B C D E F Min 0.20 10.78 2.85 - Typ 0.25 10.80 17.15 3.05 2.54 1.80 Max 0.30 10.96 3.25 - 7 . PCB Layout F or high reliability application with NePort embedded in user products,the follow items are strongly recommended: 1. S hould place decoupling capacitor(0.1uF) beside neport 2. Place 10uF capacitor between power and ground beside neport 10 3. Had better provide isolated/independent power(3.3V) for neport Chart2-7. Recommended PCB Capsulation Front 10 Back NePort has integrated power-on reset circuit inside, no need external circuit to power-on reset neport, so reset pin can be left unconnected, if user need reset neport by additional I/O provided by MCU/DSP, we will recommend the follow application circuit. Chart2-8. Recommended application circuit 11 8 ． Product Mark Product mark includes the follow information. (Chart2-9) 1. Neport series 2. MAC address 3. Part number 4. Operation condition: temperature and work voltage Chart2-9. Product mark 00-F0-0A-02-BE-01 MAC Address Part Number 9．Performance Guide Sheet2-4. Name VDD I DD VI VO VIH VIL VOH VOL I OH I OL NePort electrical parameters Description P ower Volatage Work Current Signal input voltage Signal output voltage High level input voltage Low level input voltage High level output voltage Low level output voltage High level output current Low level output current -4 4 Min -0.3 140 0 0 2 VDD-0.4 Max 3.6 170 5.5 VDD 0.8 0.4 VOH= VDD-0.4V VOL= 0.4V Unit V mA V V V V Full loading (-40 ℃ / +85℃) Condition 12 S heet2-5. Normal electrical parameters Name VDD I DD soldering Description Work Voltage Work Current Jointing Min 3.1 140 Typical 3.3 150 Max 3.5 160 Unit V mA Condition Jointing Tem:260℃±5 ℃， DippingTime≤ 5±0.5s 1 0 ． Evaluation Kit The evaluation kit targets at helping customers to integrate neport in their products efficiently. It includes the follow components ◆ NePor Evaluation Board ◆ NePort ◆ +9V Power Adaptor ◆ RS232 cross-over cable（ DB9， Fmale-Female ） ◆ CAT5e UTP RJ45M/M ◆ Product Disk Chart 2-10. Evaluation Kit Description of EVB This Kit provide the whole platform for testing neport series, it includes ae neport(Standard version), a neport plug with 8/10 pins,standard RS232 interface with coms to rs232 converter chip and led indicators 13 C hart 2-11. Evaluation Board NePort1 key Default Power input NePort1 Plug DB9 Port Onboard NePort2 00.F0.0A.02.00.1A Channel switches NePort1/2 Reset key 8Pin/2.0 Pitch NePort2 Default key 14 C hart 2-10. Schematic of Evaluation Board 15 RS232 Interface There is one onboard RS232 chip from SIPEX, it is used to convert 3.3V COMS signals to RS232 signal, normally, RS232 interface provide one DB9 connector to communicate with external DTE, for instance, connect to PC serial port. Chart 2-11. DB9 Pin Information Sheet 2-6. Signal Description of RS232 Interface NePort Signal DB9 Pin # 2 3 5 7 8 Signal Name RXD TXD GND RTS CTS DB9 Pin # 2 3 5 7 8 Terminal Device（DTE） Signal Name TXD RXD GND CTS RTS Mark：1. Pin not listed in the above sheet is not used by evaluation board 2. Recommend to make the shield of DB9 connect to ground Power On board DC JACK with internal size : 2.0mm,，power circuit support pole protection， input voltage arrange:7.5V~12V。adjustable power chips are LM2596 DC-DC and LM1117-3.3V LDO from SIPEX。 Selectable Channel Switch The Evaluation board provide 8bits DIP16/8 switch to select neport1 or neport2 to communicate with external rs232 interface. Push switch to ON will enable the corresponding signal. Attention： 1. User just can enable one group of this 8bits switch,(group 1:one:1-4 , Group 2:5-8), or Evaluation board can’t communicate with external rs232 devices 2. When all of 8bits switch are disconnected or one group are disconnect but no neport on the other group, such setting may cause no signal output to rs232 8Pin/2.0 pitch header The Evaluation board provides 8pins pitch header for OEM/ODM customized development, and this pitch header can make neport signals connect to user ’s MCU/DSP efficiently to debug or testing according to the real application Attention： Should disconnect the extern rs232 interface to avoid effect testing result Buttons The Evaluation Board integrates three buttons used as reset / defaulting setting 16 NePort Summary Embedded Seial-IP series Single port series Memory and Speed Flash Code/Boot(KB) SRAM(KB) Speed (MIPS) Core and System Serial Interfaces ARM7TDMI Multi-T RTOS Ethernet Speed (M) Uart RS232 RS485/422 Max-Baudrate(bps) Serial port Number Programmable I/O Protocol stacks PIO Number ARP/IP/ICMP/DHCP /BOOTP/TCP/UDP TFTP SNTP Http Server (web customized) Telnet Server DNS Smtp (Email Trigger) PPP/PPPOE Advanced encryption protocols SSH SSL/TLS Https Smtps Encryption Arithmetic AES DES/Triple-DES RC4 MD5 Analog parameters PowerConsumption (mA) Power suppler(V) I/O Tolerant(V) 10Base-T Activity 100Base-T Activity +75°C I = - 40 - +85°C NePort –L Series NePort-R Series LX 128k /32 80/128 55 Y Y 10/100 Y LX -485 128k /32 80/128 55 Y Y 10/100 Y Y 115200 1 -Y Y -115200 1 2 Y Y ---Y Y(*) Y(*) ----------3.3 5 165 155 C,I RJ45 Low Cost Y(*) Y(*) ----------3.3 5 165 155 C,I RJ45 Low Cost 17 460800 1 -Y Y -Y Y Y(*) ----------3.3 5 165 155 C,I RJ45 256k /32 128 55 Y Y 10/100 Y RX RX -485 256k /32 128 55 Y Y 10/100 Y Y 460800 1 2 Y Y -Y Y Y(*) ----------3.3 5 165 155 C,I RJ45 NePort Series SX 512k /32 256 55 Y Y 10/100 Y SX -485 512k /32 256 55 Y Y 10/100 Y Y 460800 1 -Y Y Y Y Y Y Y(*) ---------3.3 5 165 155 C,I RJ45 460800 1 -Y Y Y Y Y Y Y(*) Y(*) --------3.3 5 165 155 C,I RJ45 NePort-EN Series EXH 512k /32 256 60 Y Y 10/100 Y EXH -485 512k /32 256 60 Y Y 10/100 Y Y 921600 1/2/3 -Y Y -Y Y Y ----------3.3 5 165 155 C,I RJ45 921600 1/2/3 2 Y Y Y Y Y Y Y ---------3.3 5 165 155 C,I RJ45 512k /32 256 60 Y Y 10/100 Y Y 921600 1/2/3 2 Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y Y 3.3 5 165 155 C,I RJ45 ESX Operating temperature arrange C=0- Package Option (RJ45) More details by: http://www.conextop.com/products/embeddedsolution/wiredmodules/index.htm For details contact your local Conextop representative or Conextop directly: call OEM sales support at 86-755-26505615 More details about NePort at http://www.conextop.com © Conextop Technologies –November 2003 - All rights reserved The Conextop corporate logo is a registered trademark of Conextop Technology. All other names are the property of their respective owners. ©2003 Conextop, Inc. All rights reserved. Conextop, NePort, with its patent-pending technology, and neChip are trademarks of Conextop. All other trademarks are the property of their respective owners. Specifications subject to change without notice. All rights reserved. 18