OAE1048AAC

OAE, OAP, OAP3 Series ECL and PECL Oscillator PART NUMBERING GUIDE Package OAE = 14 Pin Dip / ±5.2Vdc / ECL OAP = 14 Pin Dip / +5.0Vdc / PECL OAP3 = 14 Pin Dip / +3.3Vdc / PECL Inclusive Stability 100= +/-100ppm, 50= +/-50ppm, 25= +/-25ppm, 10= +/-10ppm @ 25°C / +/-20ppm @ 0-70°C Operating Temperature Range Blank = 0°C to 70°C 27 = -20°C to 70°C (50ppm and 100ppm Only) 48 = -40°C to 85°C (50ppm and 100ppm Only) Lead-Free RoHS Compliant CALIBER Electronics Inc. Environmental/Mechanical Specifications on page F5 OAE 100 27 AA C - 30.000MHz Pin One Connection Blank = No Connect C = Complimentary Output Pin Configurationy See Table Below ECL = AA, AB, AC, AB PECL = A, B, C, E ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage Input Current Frequency Tolerance / Stability Output Voltage Logic High (Voh) Inclusive of Operating Temperature Range, Supply Voltage and Load ECL Output PECL Output Output Voltage Logic Low (Vol) ECL Output PECL Output Rise Time / Fall Time Duty Cycle Load Drive Capability Aging (@ 25°C) Start Up Time 20% to 80% of Waveform @1.4Vdc w/TTL Load ECL Output / AA, AB, AM / AC PECL Output Revision: 1994-B 20.000MHz to 250.000MHz 0°C to 70°C / -20°C to 70°C / -40°C to 85°C -55°C to 125°C ECL = ±5.2Vdc ±5% PECL = +5.0Vdc ±5% / +3.3Vdc ±5% 140mA Maximum ±100ppm, ±50ppm, ±25ppm, ±10ppm/±20ppm (0° C to 70°C) -1.0Vdc Minimum / -0.7Vdc Maximum 4.0Vdc Minimum / 4.5Vdc Maximum -1.95Vdc Minimum / -1.6Vdc Maximum 3.0Vdc Minimum / 3.42Vdc Maximum 2nSeconds Maximum 50 ±10% (Standard), 50±5% (Optional) 50 Ohms into -2.0Vdc / 50 Ohms into +3.0Vdc 50 Ohms into +3.0Vdc ±5ppm / year Maximum 20mSeconds Maximum ECL AA Pin 1 Ground/ Case PIN CONFIGURATIONS AB No Connect or Comp. Output -5.2V ECL Output Case Ground PECL C No Connect Vee PECL Output Vcc (Case Ground) AM No Connect or Comp. Output Case Ground Pin 8 ECL Output Pin 14 Pin 1 Pin 7 A No Connect Vee (Case Ground) PECL Output Vcc D PECL Comp. Out Vee PECL Output Vcc E PECL Comp. Out Vee (Case Ground) PECL Output Vcc Pin 7 Pin 8 Pin 14 -5.2V ECL Output Ground -5.2Vdc MECHANICAL DIMENSIONS 13.2 MAX Marking Guide 0.9 MAX CALIBER PART NUMBER FREQUENCY DATE CODE 7.620 ±.203 20.8 MAX 15.240 14 1 ±0.203 8 7 0.457 ±0.1 (X4) 5.08 14 Pin Full Size All Dimensions in mm. MAX Insulated Standoffs (Glass) 5.08 MIN Marking Guide Line 1: Caliber Line 2: Complete Part Number Line 3: Frequency in MHz Line 4: Date Code (Year/Week) TEL 949-366-8700 FAX 949-366-8707 WEB http://www.caliberelectronics.com CPO Series Programmable Oscillator Lead-Free RoHS Compliant CALIBER Electronics Inc. PART NUMBERING GUIDE Environmental/Mechanical Specifications on page F5 CPO - D P 5 A E T - 125.000MHz Package Style: A = Full Size, 14 Pin Dip B = Half Size, 8 Pin Dip C1 = Ceramic SMD, 5X7X1.6mm (4 pad) C2 = Ceramic SMD, 5X7X1.6mm (6 pad/PECL) P = Plastic SMD, 10X13X5mm Output Type: C = HCMOS P = PECL S = HCMOS (with Tristate) Pin One Connection: 5 = +5.0V 3 = +3.3V Pin 1 Connection: T = Tristate Enable High P = Power Down Operating Temperature Range: Blank =-20°C to 70°C E = -40°C to 85°C (50ppm / 100ppm) Inclusive Stability: A = +/-100ppm B = +/-50ppm C = +/-30ppm (0°C-70°C) D = +/-25ppm (0°C-70°C) ELECTRICAL SPECIFICATIONS Frequency Range Operating Temperature Range Storage Temperature Range Supply Voltage Input Current Frequency Tolerance / Stability Inclusive of Operating Temperature Range, Supply Voltage and Load Revision: 2000-B 340.000kHz to 250.000MHz -20°C to 70°C / -40°C to 85°C -55°C to 125°C 5.0Vdc ±10%, 3.3Vdc ±10% 70mA Maximum ±100ppm, ±50ppm, ±30ppm (-20°C to 70°C), ±25ppm (-20° to 70°C) -1.0V Min. Vdd: -0.8V Max. -.04Vdc Min. -2.0V Min. Vdd: -1.6V Max. 0.4Vdc Max. 2nS Max. 20% to 80% / 80% to 20% (PECL) 5nS Max. 10% to 90% / 90% to 10% (HCMOS) PECL HCMOS 50 ±10% 50 ±5% 5.0V: up to 100.000MHz = 25pF / 100 to 250.000MHz = 10pF 3.3V: up to 100.000MHz = 15pF / 100 to 250.000MHz = 10pF No Connection VIH VIL Enables Output +2.2Vdc Minimum to Enable Output +0.8Vdc Maximum to Disable Output 30mA Max. (pin 1 ground) 50uA Max. (pin 1 ground) Output Voltage Logic High (Voh) / PECL Output Voltage Logic High (Voh) / HCMOS Output Voltage Logic Low (Vol) / PECL Output Voltage Logic Low (Vol) / HCMOS Rise Time / Fall Time Duty Cycle Load Drive Capability Pin 1 Tristate Input Voltage Disable Current (TS Option) Standby Current (PD Option) Aging (@ 25°C) Start Up Time Absolute Clock Jitter One Sigma Clock Jitter ±5ppm / year Maximum 10mSeconds Maximum ±175pSeconds Maximum ±50pSeconds Maximum TEL 949-366-8700 FAX 949-366-8707 WEB http://www.caliberelectronics.com