P10D483R3S

10W DC-DC Converter P10D-Series ● ● ● ● ● ● ● Wide 4:1 input range Efficiency up to 85 % 1500 VDC isolation Continuous short circuit protection Standard package 2” x 1” x 0.4” MTBF 1.12 M hours Wide Operating Temperature Range -40..+85°C Model selection guide Typ Input nominal Input voltage quiescent [VDC] current [mA] 9...36 9...36 9...36 9...36 18...72 18...72 18...72 18...72 9...36 9...36 9...36 18...72 18...72 18...72 25 25 25 25 20 20 20 20 25 25 25 20 20 20 Output voltage [VDC] 3.3 5.0 12.0 15.0 3.3 5.0 12.0 15.0 ±5.0 ±12.0 ±15.0 ±5.0 ±12.0 ±15.0 Output current [mA] 2000 2000 833 666 2000 2000 833 666 ±1000 ±416 ±333 ±1000 ±416 ±333 Efficiency typ. capacitive load [%] [µF] 79 82 85 85 78 83 85 85 82 85 85 82 85 85 3300 3300 680 470 3300 3300 680 470 2 x 2200 2 x 470 2 x 330 2 x 2200 2 x 470 2 x 330 Single output P10D243R3S P10D2405S P10D2412S P10D2415S P10D483R3S P10D4805S P10D4812S P10D4815S Dual output P10D2405D P10D2412D P10D2415D P10D4805D P10D4812D P10D4815D Page 1 of 2 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: power@hy-line.de Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: power@hy-line.ch 10W DC-DC Converter P10D-Series Specifications Input Voltage range Filter Isolation Voltage: Input to Output Input/Output to Case Resistance Capacitance Output Voltage accuracy Load voltage regulation Line voltage regulation Over current protection Short circuit protection Short circuit restart Ripple and noise (at 20 MHz BW) Temperature coefficient 24 VDC, 9…36 VDC 48 VDC, 18…72 VDC Capacitors 1,5 kVDC for 1 min., test 1s 1000 VDC for 1 min. 109 Ω 1200 pF, typ. ± 1% ± 0.5%, at 10..100% load ± 0.5%, max. 140% of max. Iout Continuous Automatic 75 mVp-p, max. ± 0.02% / °C General Switching frequency Safety standard in accordance with Environmental Operating temperatur (ambient) Case temperature Storage temperature Derating Humidity Cooling Physical Dimensions Weight Case material Potting material Pin material Soldering temperature 1.5mm distance from case 200 kHz, typ. IEC60950-1 : 2001 -40 °C...+85 °C 100 °C, max. -40 °C...+125 °C None required Up to 95%, non-condensing Free-air convection 50.80 x 25.40 x 10.16 mm 30.0 g Nickel-coated copper Epoxy (UL94V-0 rated) Brass solder coated 260°C for 10s Dimensions COM / no Pin COM / no Pin Output ripple and noise reduction + DC Power Source +input +output Scope Load To reduce ripple and noise, it is recommended to use 4.7µF capacitors to the output DC/DC Converter -input -output Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 2 / 07f Page 2 of 2 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: power@hy-line.de Schweiz: Gründenstrasse 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: power@hy-line.ch