caps
Cap in standard execution, material aluminium (code D)
BIMETAL CUTOUTS
R53 R54 R55
Cap for fixed mounting stainless steel (code F)
Exposed bimetal cap (code FX)
• Deviations from standard controls (caps, terminals, fixings) on request. • Especially for electronic applications with voltage 6…120 Vac / 6…30 Vdc and current 10…100 mA, gold crossbar contacts are available. • Single operation devices (SOD) are available up to 150ºC or with reset temperature -35ºC (type B-2).
R
Ordering and marking example
Ordering example Marking example CS-7S R100U norm. closed response temperature CS710025Y 2250 manufacture code date of manufacture
R53 CS7
100 2 5 Y __ __
Mounting Bracket D is Std. Optional Terminals Y1 & Z1 are standard Terminals Y= .25” QC Horz. Z=.25” QC Vert. Tolerance 5= +/- 5ºC Contact Configuration 1=NO 2=NC Response Temperature in ºC Model
8415 Mountain Sights Avenue • Montreal (Quebec), H4P 2B8, Canada Tel: (514) 739-3274 • 1-800-561-7207 • Fax: (514) 739-2902 • E-mail: sales@cantherm.com
Website: www.cantherm.com | Division of Microtherm
2010/March R53
Technical data
ratings \ control type
function version rated current at 250 Vac ( cos φ 0,95 ) VDE switching cycles temperature range TA (steps in 5ºC) rated current at 125/250 UL tolerance contact resistance / Insulation res. / dielectric res. hysteresis / reset temp. deg. of protection provided by enclosures (EN 60529) VDE / ENEC approvals UL / CUL CSA Set -15...25ºC switching cycles temperature range TA (steps in 5ºC)
Mounting rings R53
CS-7S CS-17 B-2
SOD nc 25A/15A 1 60...150ºC 25A 1 0...200ºC automatic normally closed / normally open 10A 100,000 15A/10A 100,000 -20...200ºC -20...200ºC 25A/25A 100,000 150ºC 25A 100,000
R54
CH-15
automatic nc / no 15 (10) 100,000 -20...200ºC 15/10 100,000 0...250ºC
R55
CR71
manual nc 10(8) – -20...200ºC 15(10) – 50...200ºC SOD nc 10 1
CH-152-35
type
code
photo
drawing dimensions (mm)
technical description
approvals
Standard D
23.8mm mounting ring, loose or fixed at 45°, 90°, or 135°.
0...220ºC 17A 1 0...260ºC
> +/- 3ºC (+/- 5ºC Typical) < 50 mΩ / >100 mΩ at 500V / 1500V for 1 minute -35ºC IP00 Cert# 40010923 EN 60730-1 / -2-9 / 1-A15 / 1-A16 UL 873 File E50367 C22.2 No.24 File LR85323 -15...25ºC -35ºC –
CS-7S, CS-17, B2, CR-71
M
25mm mounting ring, loose or fixed at 45°, 90°, or 135°.
UL, CSA, VDE
E
30mm mounting ring, loose.
Standard types
type nc no code photo drawing dimensions (mm) technical description
Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Vertical (Z type) Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Horizontal (Y type) Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Horizontal (Y type) Terminals 6.3 x 0.8, 4.8 x 0.5 mm Sn or Ni plate, Housing: Thermoset, Cap: SS, Welded Bracket, Terminals Horizontal (Y type) Terminals 6.3 x 0.8, Steel Ni plate, Housing: Ceramic Thermoset, Cap: Aluminum, Loose Bracket, Terminals Horizontal (Y type) UL, CSA, VDE
CS-7S, B2, CR-71, CS-17
L
41mm mounting bracket fixed at 45°, 90° or 135°.
UL, CUL
approvals
Term = Z1 Ring = D CS-7S, CS-17, B2
Thru-Hole Mnt. = F
R53
Flange Cap mounting, Stainless Steel fixed at 45°, 90° or 135° UL, CSA, VDE
2
1 Term = Y1 Ring = D
CS-7S, B2, CR-71
Exposed Bimetal Thru Hole = FX
Flange Cap mounting, w/exposed bimetal, Stainless Steel fixed at 45°, 90° or 135°
CR-71
R55
2
–
Ring = D
Terminals
code
UL, CUL, VDE Y1 [STD] Brass Faston Tin Plate .250 Y2 Brass Faston Tin Plate.187 Y3 Brass Faston Nickel Plate .250 Y4 Brass Faston Nickel Plate .187 Y5 Steel Faston Nickel Plate .250 Y6 Steel Nickel Solder Connection Y7 Brass Nickel Solder Connection Z1 [STD] Brass Faston Tin Plate .250 Z2 Brass Faston Tin Plate.187 Z3 Brass Faston Nickel Plate .250 Z4 Brass Faston Nickel Plate .187 Z5 Steel Faston Nickel Plate .250
used in type
CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2, CH-15 CS-7,CR-71, B2, CH-15 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CH-15
photo
drawing dimensions (mm)
technical description
Horizontal Fastons
approvals
CS-17
R53
2
1
Ring = L
Faston
6.3mm x 0.8mm 4.8mm x 0.8mm UL, CSA, VDE Vertical Fastons 6.3mm x 0.8mm 4.8mm x 0.8mm
CH-15, CH-152-35
R54
2
1
Ring = None Term = Y7
Y6 Solder Connection
Technical data
ratings \ control type
function version rated current at 250 Vac ( cos φ 0,95 ) VDE switching cycles temperature range TA (steps in 5ºC) rated current at 125/250 UL tolerance contact resistance / Insulation res. / dielectric res. hysteresis / reset temp. deg. of protection provided by enclosures (EN 60529) VDE / ENEC approvals UL / CUL CSA Set -15...25ºC switching cycles temperature range TA (steps in 5ºC)
Mounting rings R53
CS-7S CS-17 B-2
SOD nc 25A/15A 1 60...150ºC 25A 1 0...200ºC automatic normally closed / normally open 10A 100,000 15A/10A 100,000 -20...200ºC -20...200ºC 25A/25A 100,000 150ºC 25A 100,000
R54
CH-15
automatic nc / no 15 (10) 100,000 -20...200ºC 15/10 100,000 0...250ºC
R55
CR71
manual nc 10(8) – -20...200ºC 15(10) – 50...200ºC SOD nc 10 1
CH-152-35
type
code
photo
drawing dimensions (mm)
technical description
approvals
Standard D
23.8mm mounting ring, loose or fixed at 45°, 90°, or 135°.
0...220ºC 17A 1 0...260ºC
> +/- 3ºC (+/- 5ºC Typical) < 50 mΩ / >100 mΩ at 500V / 1500V for 1 minute -35ºC IP00 Cert# 40010923 EN 60730-1 / -2-9 / 1-A15 / 1-A16 UL 873 File E50367 C22.2 No.24 3) File LR85323 -15...25ºC -35ºC –
CS-7S, CS-17, B2, CR-71
M
25mm mounting ring, loose or fixed at 45°, 90°, or 135°.
UL, CSA, VDE
E
30mm mounting ring, loose.
Standard types
type nc no code photo drawing dimensions (mm) technical description
Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Vertical (Z type) Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Horizontal (Y type) Terminals 6.3 x 0.8, 4.8 x 0.5mm Sn or Ni plate, Housing: Thermoset, Cap: SS or Al, Loose Bracket, Terminals Horizontal (Y type) Terminals 6.3 x 0.8, 4.8 x 0.5 mm Sn or Ni plate, Housing: Thermoset, Cap: SS, Welded Bracket, Terminals Horizontal (Y type) Terminals 6.3 x 0.8, Steel Ni plate, Housing: Ceramic Thermoset, Cap: Aluminum, Loose Bracket, Terminals Horizontal (Y type) UL, CSA, VDE
CS-7S, B2, CR-71, CS-17
L
41mm mounting bracket fixed at 45°, 90° or 135°.
UL, CUL
approvals
Term = Z1 Ring = D CS-7S, CS-17, B2
Thru-Hole Mnt. = F
R53
Flange Cap mounting, Stainless Steel fixed at 45°, 90° or 135° UL, CSA, VDE
2
1 Term = Y1 Ring = D
CS-7S, B2, CR-71
Exposed Bimetal Thru Hole = FX
Flange Cap mounting, w/exposed bimetal, Stainless Steel fixed at 45°, 90° or 135°
CR-71
R55
2
–
Ring = D
Terminals
code
UL, CUL, VDE Y1 [STD] Brass Faston Tin Plate .250 Y2 Brass Faston Tin Plate.187 Y3 Brass Faston Nickel Plate .250 Y4 Brass Faston Nickel Plate .187 Y5 Steel Faston Nickel Plate .250 Y6 Steel Nickel Solder Connection Y7 Brass Nickel Solder Connection Z1 [STD] Brass Faston Tin Plate .250 Z2 Brass Faston Tin Plate.187 Z3 Brass Faston Nickel Plate .250 Z4 Brass Faston Nickel Plate .187 Z5 Steel Faston Nickel Plate .250
used in type
CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2, CH-15 CS-7,CR-71, B2, CH-15 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CS-7,CR-71, B2 CH-15
photo
drawing dimensions (mm)
technical description
Horizontal Fastons
approvals
CS-17
R53
2
1
Ring = L
Faston
6.3mm x 0.8mm 4.8mm x 0.8mm UL, CSA, VDE Vertical Fastons 6.3mm x 0.8mm 4.8mm x 0.8mm
CH-15, CH-152-35
R54
2
1
Ring = None Term = Y7
Y6 Solder Connection
caps
Cap in standard execution, material aluminium (code D)
BIMETAL CUTOUTS
R53 R54 R55
Cap for fixed mounting stainless steel (code F)
Exposed bimetal cap (code FX)
• Deviations from standard controls (caps, terminals, fixings) on request. • Especially for electronic applications with voltage 6…120 Vac / 6…30 Vdc and current 10…100 mA, gold crossbar contacts are available. • Single operation devices (SOD) are available up to 150ºC or with reset temperature -35ºC (type B-2).
R
Ordering and marking example
Ordering example Marking example CS-7S R100U norm. closed response temperature CS710025Y 2250 manufacture code date of manufacture
R53 CS7
100 2 5 Y __ __
Mounting Bracket D is Std. Optional Terminals Y1 & Z1 are standard Terminals Y= .25” QC Horz. Z=.25” QC Vert. Tolerance 5= +/- 5ºC Contact Configuration 1=NO 2=NC Response Temperature in ºC Model
8415 Mountain Sights Avenue • Montreal (Quebec), H4P 2B8, Canada Tel: (514) 739-3274 • 1-800-561-7207 • Fax: (514) 739-2902 • E-mail: sales@cantherm.com
Website: www.cantherm.com | Division of Microtherm
2010/March R53