SM5420-015-A-H-T

SM5420-015-A-H-T

  • 厂商:

    ETC2

  • 封装:

  • 描述:

    SM5420-015-A-H-T - Low-Cost, SO-8 Packaged Pressure Sensor - List of Unclassifed Manufacturers

  • 详情介绍
  • 数据手册
  • 价格&库存
SM5420-015-A-H-T 数据手册
SILICON MICROSTRUCTURES INCORPORATED • • SM5420 Low-Cost, SO-8 Packaged Pressure Sensor For High-Volume Applications Ultra-Small, Low Cost OEM Pressure Package DESCRIPTION The SM5420 is a small outline SO-8 packaged pressure sensor. The sensor uses SMI’s SM5108 micromachined, piezoresistive pressure sensing chip that has been optimized to provide the highest possible accuracy for a package of this size. This performance is achieved through careful resistor placement and mechanical configuration along with advanced MEMS processing. This sensor is intended for high volume applications where cost is a critical factor, such as consumer tire pressure gauges or automotive tire pressure monitoring. The SM5420 is available as an absolute pressure sensor in full-scale ranges of 15 PSI, 30 PSI, 60 PSI, and 100 PSI. It is designed to be surface-mounted on ceramic or PC board substrates by high-volume OEM manufacturers. The SM5420 is available in a ported configuration to allow positive positioning of a pressure source over the inlet or in a nonported configuration to be used for sensing general environmental pressures or with an oring seal. The port position has been chosen to minimize the chance of pressure pulses directly impacting the face of the sensor die for added long-term reliability in hostile environments. The part comes with gel over the die as standard; the part can be ordered without gel in high volumes where the maximum stability is required, such as in barometric, weather station sensing applications. Please contact SMI for more information. The SM5420 is shipped either in IC tubes or in tape-and-reel. Custom pressure ranges are available in highvolume applications. Minimum order quantities apply to this product. Rev 1.2 4_05  2004 - 2005 Silicon Microstructures, Inc. ♦ 1701 McCarthy Blvd. ♦ Milpitas, CA 95035 USA Tel: 408-577-0100 ♦ Fax: 408-577-0123 ♦ sales@si-micro.com ♦ www.si-micro.com FEATURES • • • • • • • Available in 15 PSI, 30 PSI, 60 PSI, and 100 PSI ranges o W ide Temperature range (-40 to +125 C) Suitable for Automated Assembly Extremely Low Cost Small foot-print (0.16 in X 0.20 in) package Constant Current or Constant Voltage Drive High millivolt Output APPLICATIONS • • • • • • • Automotive Tire Pressure Monitoring Engine Control Barometric Sensing Altitude Correction Detection Pneumatic Gauges Hand-held Meters Home Appliances SM5420 CHARACTERISTICS FOR SM5420 - SPECIFICATIONS All parameters are measured at 5.000V supply at room temperature, unless otherwise specified. Min. Excitation Voltage Excitation Current Span (FS Range), PSI (kPa) 15 (103) 30 (207) 60 (414) 100 (689) Offset TC Span TC Offset TC Resistance Linearity Bridge Impedance Input Capacitance Proof Pressure Burst Pressure Operating Temperature Storage Temperature 0 0 65 65 65 65 -35 -24 -7 +24 -0.20 4 3X 5X -40 -55 Typ. 5.0 1.5 100 100 100 100 -19 -1 +27.5 -0.07 5
SM5420-015-A-H-T
1. 物料型号:型号为MAX31855,是一款用于热电偶测量的集成电路。

2. 器件简介:MAX31855集成电路能够直接与K型热电偶配合,提供高精度的温度测量,适用于工业、医疗和科研等领域。

3. 引脚分配:该芯片共有8个引脚,包括V+、GND、SCK、CS、SO、T-、T+和TH。其中V+和GND为电源引脚,SCK、CS、SO分别为时钟、片选和数据输出引脚,T-和T+分别连接热电偶的负极和正极,TH用于热电偶类型选择。

4. 参数特性:主要特性包括±1°C的测量精度,支持3线SPI接口,内置16位ADC,具备冷端补偿功能等。

5. 功能详解:MAX31855内部集成了温度测量所需的所有功能,包括对热电偶信号的放大、线性化处理以及数字输出,简化了外部电路设计。

6. 应用信息:广泛应用于需要高精度温度测量的场合,如工业控制、医疗设备、环境监测等。

7. 封装信息:采用TQFN封装,具有较好的热性能和电气性能,适合在紧凑的空间内使用。
SM5420-015-A-H-T 价格&库存

很抱歉,暂时无法提供与“SM5420-015-A-H-T”相匹配的价格&库存,您可以联系我们找货

免费人工找货