SM67-3N001

SM67-3N001 Multi-Mode 670nm VCSEL Chip ► Features : 670nm wavelength range : Operatiing to over 50 C : Low current and voltage : High reliability :Other configurations available on request o ► Description ► Applications : Consumer Electronics : Position Sensors : Medical Instruments : Home Networking : Data Link Communication, IEEE1394b : Low power consumption application such as battery-operated equipment ► Absolute Maximum Ratings Parameter Storage Temperature Operating Temperature Lead Solder Temperature Continuous Forward Current Continuous Reverse Voltage Rating -40 to 85 oC -20 to 50 oC 260 oC, 10 sec 7mA 5V (@10µA) ► 220 ± 25 Dimensions 55 220 ± 25 80 72 Unit: µm Die Height: 200±15 µm 100 Rev. 2.1 1/1 O LASER COMP ONENTS G mb H Werner-von-Siemens-Str. 15, 82140 Olching, Germany, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, info@lasercomponents.com SM67-3N001 Multi-Mode 670nm VCSEL Chip ► Parameters Threshold Current Slope Efficiency Optical Output Power Peak Wavelength Electro-Optics Characteristics (Ta=25oC unless otherwise stated) Specified Min. Typ. 2 0.3 0.4 1.0 660 670 690 0.85 14 2.1 60 30 2.5 80 Max. 3.5 Symbol Ith η Po λ ∆λ Θ Vf Rd Unit mA W/A mW nm nm ° V Ohm Test Conditions CW If = 4mA If = 4mA If = 4mA If = 4mA P0=1.0mW, ( Full Width,1/e2) If = 4mA If = 4mA Spectral Bandwidth (RMS) Beam Divergence Operating Voltage Dynamic Resistance Thermal Characteristics Parameters Max. Operating Temperature Optical Output Power Ith Temperature Variation η Temperature Variation λ Temperature Variation Symbol PT=50 °C ∆Ith ∆η / ∆T ∆ λ / ∆T Min. Typ. 0.7 1 -0.8 0.05 Notes Max. Unit mW mA %/ oC nm/ oC Test Conditions Ta= 50 oC, 4mA Ta= -20 to 50 oC Ta= -20 to 50 oC at 4mA Ta= -20 to 50 oC at 4mA ► * These specifications are subject to change without notice. DANGER Laser Radiation AVOID DIRECT EXPOSURE TO BEAM AVOID EXPOSURE Laser Radiation is emitted from this aperture ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC SENSITIVE DEVICES Class 3a or Class 3b Product NOTICE The inherent design of this component causes it to be sensitive to electrostatic discharge(ESD). To prevent ESDinduced damage and/or degradation to equipment, take normal ESD precautions when handling this product The VCSEL is a class IIIb laser and should be treated as a potential eye hazard. Due to the size of the component, DANGER the applicable warning component itself. logotype, aperture label, and certification / identification label cannot be placed on the Rev. 2.1 2/2 O LASER COMP ONENTS G mb H Werner-von-Siemens-Str. 15, 82140 Olching, Germany, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, info@lasercomponents.com SM67-3N001 Multi-Mode 670nm VCSEL Chip ► LIV Curve Characteristics Curves LIV vs Temperature 2.5 RT. 5 2.5 CW . -20 C o -10 C o 0C o 10 C o 20 C o 30 C o 40 C o 50 C o 5 4 3 2 1 0 8 Output power (mW) Output power (mW) 2.0 1.5 1.0 0.5 0.0 4 2.0 1.5 1.0 0.5 0.0 0 Voltage (V) 3 2 1 0 0 2 4 6 8 Current(mA) Ith vs Temperature 3.5 2 4 6 Cu r r e n t ( mA) Po vs Temperature 3.0 Output Power ( mW ) 3.0 2.5 2.5 2.0 1.5 1.0 0.5 0.0 -20 -10 0 10 20 30 o I = 4mA Ith ( mA ) 2.0 1.5 1.0 0.5 -20 -10 0 10 20 30 o 40 50 40 50 Temperature ( C) Far Field Pattern Temperature ( C) 2D 3D 4mA. RT Rev. 2.1 www.lasercomponents.com Issue: 01/07 / V1 / HW / divers-vis/optow/ sm67-3n001.pdf LASER COMP ONENTS G mb H Werner-von-Siemens-Str. 15, 82140 Olching, Germany, Phone: +49 8142 2864 0, Fax: +49 8142 2864 11, info@lasercomponents.com Voltage (V) 3/3 O