UDM40LSESYR2LTX

Digital Panel Meters Modular Indicator and Controller Type UDM40 • • • • • • • • • • • • • Multi-input modular instrument 4 dgt LED 0.1% RDG basic accuracy TRMS AC current and voltage measurements AC/DC current measurements; selectable full scales (200µA to 5A) AC/DC voltage measurements; selectable full scales (200mV to 500V) °C or °F temperature measurements (Pt100-250-500-1000, Ni100, TC J-K-S-T-E) Resistance measurements; selectable full scales (20Ω to 20kΩ) Up to 4 independent alarm set-points (optional) 20mA/10VDC analog output (optional) Serial port RS485 or RS232 (optional) MODBUS, JBUS communication protocol Front protection degree: IP67, NEMA4x LED display, selectable colour (red, amber, green) • The alarm status can be coupled to the different colour of the display • Linearization of V and A inputs up to 16 points Product Description digital panel µp-based meter, 4-dgt LED indicator, for current, voltage, temperature and resistance measurements. Measuring ranges and functions easily programmable from the keypad or from the PC by means of optional UdmSoft software. UDM40 includes storage min-max functions and double level protection password. Housing for panel mounting with front protection degree: IP67, NEMA4x. How to order Model Slot A Slot B Slot C Slot D Options UDM40 XXX XX XX X XX How to order UdmSoft-kit Type Selection Slot A (measuring inputs) LSX: signal inputs: 0.2-2-20mA DC/AC; 0.2-2-20V DC/AC LSE/ LSF: signal inputs: + AUX: 0.2-2-20mA DC/AC; 0.2-2-20V DC/AC HSX: signal inputs: 0.2-2-5A DC/AC; 20-200-500V DC/AC TRX: signal inputs: TC temperature probes (J-KS-T-E, Pt100-250-5001000) and resistance (0.02-0.2-2-20kΩ) Slot B (communication) XX: SX: SY: AV(*): None Serial port RS485 Serial port RS232 Single analogue output, 0 to 20mA DC and 0 to 10V DC The two analogue outputs cannot be used at the same time. It is possible to plug in only one module by instrument. UdmSoft-kit: software plus “UCOM1” communication cable for programming UDM40 by means of PC . Slot C (communication and alarm) XX: R1: None Single relay output, (AC1-8AAC, 250VAC) R2: Dual relay output, (AC1-8AAC, 250VAC) R4: Dual relay output, (AC18AAC, 250VAC) + dual open collector output (NPN, 100mA) R5: 4 relay outputs (AC1-5AAC, 250VAC) AV(*): Single analogue output, 0 to 20mA DC and 0 to 10V DC Slot D (power supply) H: L: 90 to 260V AC/DC 18 to 60V AC/DC Options XX: TX: None Tropicalization (*): Input Specifications Analogue inputs BQ LSX module BQ LSE/LSF module BQ HSX module BQ TRX module BQ TRX module Digital inputs Number of inputs Use Channels and variable 1, mA and V DC/AC 1, mA and V DC/AC + AUX 1, A and V DC/AC 1, temperature 1, resistance Incl. in the measuring module 1 (voltage-free) key-pad lock Display hold Reset of latch alarms Contact reading signal Close contact resistance Open contact resistance Insulation Accuracy (display, RS485) BQ xxx: