UG-2828GDEDF02

Product Specification (Preliminary) Part Name: OEL Display Module Part ID: UG-2828GDEDF02 Doc No.: SAS1-XXXX-A Customer: Approved by From: Univision Technology Inc. Approved by Univision Technology Inc. 8, Kebei RD 2, Science Park, Chu-Nan, Taiwan 350, R.O.C. Notes: 1. Please contact Univision Technology Inc. before assigning your product based on this module specification 2. The information contained herein is presented merely to indicate the characteristics and performance of our products. No responsibility is assumed by Univision Technology Inc. for any intellectual property claims or other problems that may result from application based on the module described herein. Univision Technology Inc. Revised History Part Number UG-2828GDEDF02 Revision A New Revision Content Doc. No: SAS1-XXXX-A Revised on May 4, 2006 i Univision Technology Inc. Doc. No: SAS1-XXXX-A Notice: No part of this material may be reproduces or duplicated in any form or by any means without the written permission of Univision Technology Inc. Univision Technology Inc. reserves the right to make changes to this material without notice. Univision Technology Inc. does not assume any liability of any kind arising out of any inaccuracies contained in this material or due to its application or use in any product or circuit and, further, there is no representation that this material is applicable to products requiring high level reliability, such as, medical products. Moreover, no license to any intellectual property rights is granted by implication or otherwise, and there is no representation or warranty that anything made in accordance with this material will be free from any patent or copyright infringement of a third party. This material or portions thereof may contain technology or the subject relating to strategic products under the control of Foreign Exchange and Foreign Trade Law of Taiwan and may require an export license from the Ministry of International Trade and Industry or other approval from another government agency. © Univision Technology Inc. 2006, All rights reserved. All other product names mentioned herein are trademarks and/or registered trademarks of their respective companies. ii Univision Technology Inc. Contents Doc. No: SAS1-XXXX-A Revision History ................................................................................................ i Notice ............................................................................................................... ii Contents .......................................................................................................... iii 1. Basic Specifications ............................................................................... 1~4 1.1 1.2 1.3 1.4 1.5 1.6 Display Specifications ............................................................................................. 1 Mechanical Specifications ....................................................................................... 1 Active Area & Pixel Construction............................................................................ 1 Mechanical Drawing ............................................................................................... 2 Pin Definition.......................................................................................................... 3 Block Diagram ........................................................................................................ 4 2. Absolute Maximum Ratings.........................................................................5 3. Electrical Characteristics .......................................................................6~12 3.1 DC Characteristics................................................................................................... 6 3.2 AC Characteristics................................................................................................... 7 3.2.1 68XX-Series MPU Parallel Interface Timing Characteristics ......................... 7 3.2.2 80XX-Series MPU Parallel Interface Timing Characteristics ......................... 9 3.2.3 Serial Interface Timing Characteristics ........................................................ 11 3.3 Optics & Electrical Characteristics ........................................................................ 12 3.4 General Electrical Specification............................................................................. 12 4. Functional Specification ......................................................................13~14 4.1 Commands ............................................................................................................ 13 4.2 Power down and Power up Sequence..................................................................... 13 4.2.1 Power up Sequence...................................................................................... 13 4.2.2 Power down Sequence ................................................................................. 13 4.3 Reset Circuit.......................................................................................................... 13 4.4 Actual Application Example .................................................................................. 14 5. Reliability ...................................................................................................15 5.1 Contents of Reliability Tests.................................................................................. 15 5.2 Lifetime................................................................................................................. 15 5.3 Failure Check Standard.......................................................................................... 15 6. Outgoing Quality Control Specifications .............................................16~20 6.1 Environment Required........................................................................................... 16 6.2 Sampling Plan ....................................................................................................... 16 6.3 Criteria & Acceptable Quality Level...................................................................... 16 6.3.1 Cosmetic Check (Display Off) in Non-Active Area...................................... 16 6.3.2 Cosmetic Check (Display Off) in Active Area .............................................. 19 6.3.3 Pattern Check (Display On) in Active Area .................................................. 20 7. Package Specifications ..............................................................................21 iii Univision Technology Inc. 8.1 8.2 8.3 8.4 8.5 Doc. No: SAS1-XXXX-A 8. Precautions When Using These OEL Display Modules.......................22~24 Handling Precautions............................................................................................. 22 Storage Precautions ............................................................................................... 23 Designing Precautions ........................................................................................... 23 Precautions when disposing of the OEL display modules....................................... 23 Other Precautions .................................................................................................. 23 iv Univision Technology Inc. 1. Basic Specifications 1.1 Display Specifications 1) 2) 3) Display Mode: Display Color: Drive Duty: Passive Matrix 262,144 Colors (Maximum) 1/128 Duty Doc. No: SAS1-XXXX-A 1.2 Mechanical Specifications 1) 2) 3) 4) 5) 6) 7) Outline Drawing: Number of Pixels: Panel Size: Active Area: Pixel Pitch: Pixel Size: Weight: According to the annexed outline drawing number 128(RGB) × 128 33.80 × 34.00 × 1.70 (mm) 26.855 × 26.864 (mm) 0.07 × 0.21 (mm) 0.045 × 0.194 (mm) 4.0 (g) 1.3 Active Area & Pixel Construction S0 ( Column 1 ) G127 ( Row 128 ) S383 ( Column 384 ) G126 ( Row 127 ) G1 ( R ow 2 ) G0 ( R ow 1 ) 0.21 0.185 0.07 0.045 0.21 0.194 RGBRGB RGB 1 Item A Date 20060512 Remark Original Drawing 0. 5±0.5 (2. 472) (3. 472) 1.6±0.1 0.1 Max 0.5±0.5 10 33.8±0. 2 (Panel Size) 33. 8±0.2 (Cap Siz e) 32.8 (Polarize r) 28. 855 (V ie w A rea) P0. 07x(128x3)-0.025=26.855 (Active A rea) 5 1.4 Mechanical Drawing Protec tive Film 25m m x 10mm 1.5 3 (Stiffener) 1 30 Conta ct Side NC VSSH VDDH VSSH IR EF OSCA2 OSCA1 EXPORT1 CPU PS D1 7 D1 6 D1 5 D1 4 D1 3 D1 2 D11 D1 0 D9 RS C SB RDB WR B R ESETB VSS VDD VSSH VDDH VSSH NC 8R0 .5 Univision Technology Inc. P.0.5x(30- 1)=14.5±0.05 (W0.3±0.03) (Reference Mechnical Design) Display Pattern Scale (40:1) 6.55±0.2 Notes: 26.6±0. 1 ( Alignme nt Hole ) 15. 5±0.2 28.6±0.2 0.1 0.3±0.03 0.8 Max Customer Approval Signature Unless Otherwise Specified Unit General Roughness The drawing contained herein is the exclusive prope rty of Univision. It is not allowed to copy, reproduce and or disclose in any formats without permission of Univision. 1. Driver IC: SEPS225 2. COF Number: SEPS225F2 3. Interface: 8-/9-bit 68XX/80XX Parallel, 4-wire SPI 4. The film terminal use "Au Plating" 5. Suggest connector use BL114-30RU 6. General Tolerance: ±0.30 7. The total thickness (1.70 Max) is without Polarizer protective film & remove tape. The actual assembled total thickness with above materials should be 1.85 Max mm Tolerance Dimension ±0.3 Angle ±1 59 0. (R 0.194 0.21 (9.5) 8.5 9.5 13.5±0.2 ) 5 ±0 .0 0.5 2-R 4.5 18.08 Glue (2.1) (1.1) 8 S383 ( Column 384 ) Display Patter n S0 ( C olumn 1 ) G 127 ( R ow 128 ) G 126 ( Row 127 ) G1 P o la riz e r t= 0 .2 m m ( R ow 2 ) G0 ( R ow 1 ) 31 (Polarizer) P0.21x128-0.016=26.864 (Active Area) 28.864 (View Area) 32±0.2 (Cap Size) 34±0.2 (Panel Size) 0 .2 1 0 .1 8 5 0 .0 7 0 .0 4 5 (11.24) Active Area 1.50" 128(RGB) x 128 Pixels (1.78) RGBRGB (3.43) 1.67 Univision Technology Inc. Title UG-2828GD EDF02 Folding Type OEL Dis pla y Module Pixel Number: 128(RG B) x 128, 262144 Colors, COF Pa ckage ( R0 .5) RGB Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 Symbol NC VSSH VDDH VSSH IREF OSCA2 OSCA1 EXPORT1 CPU PS D17 D16 D15 D14 D13 D12 D11 D10 D9 RS CSB RDB WRB RESETB VSS VDD VSSH VDDH VSSH NC Drawing Number DFE2828CN CF24 Rev. A Doc. No: SAS1-XXXX-A By Date Drawn Kirin Zhua ng 20060512 Checked Jerry Wang 20060512 Reviewed Simon Lee 20060512 Approve Byron Cheng 20060512 Materia l Soda Lime / Polyimide Product M anager Jian-Jia Hung Scale Sheet Size 1 :1 1 of 1 A3 2 Univision Technology Inc. 1.5 Pin Definition Pin Number 2,4,27,29 3,28 25 26 5 6 7 8 9 10 Symbol VSSH VDDH VSS VDD. IREF OSCA2 OSCA1 EXPORT1 CPU PS Type P P P Doc. No: SAS1-XXXX-A Function Return Ground for VDDH External Column Driving Power Supply. Power supply ground P Logic power supply. Current Reference for Brightness Adjustment I/O Tie 68KΩ resistor to VSS. O Fine adjustment for oscillation I Tie 10 KΩ resistor to OSCA1 between OSCA2. When the external clock mode is selected, OSCA1 is used external clock input. O OSC Test I Selects the CPU type I Low: 80-series CPU, High: 68-Series CPU. Selects parallel/Serial interface type Low: serial, High: parallel. Host Data Input/Output Bus These pins are 9-bit bi-directional data bus to be connected with MCU data bus. PS Description 8_bit bus : D[17:10] 1 9_bit bus : D[17:9] D[17] SCL : Synchronous clock input 0 D[16] SDI : Serial data input D[15] SDO : Serial data output Fix unused pins to the VSS level. 11~19 D17~D9 I/O 20 21 RS CSB I I Selects the data/command Low: command, High: parameter/data Chip Select Low: SEPS225 is selected and can be accessed. High: SEPS225 is not selected and cannot be accessed. Read or Read/Write Enable 22 RDB I 80-system bus interface: read strobe signal (active low). 68-system bus interface: bus enable strobe (active high). When serial mode, fix it to VDD or VSS level. Write or Read/Write Select 23 WRB I 80-system bus interface: write strobe signal (active low). 68-system bus interface: read/write select. Low: write, High: read. When serial mode, fix it to VDD or VSS level. 24 1,30 RESETB NC I - Chip Reset Reset SEPS225 (active low) No Connection 3 Univision Technology Inc. 1.6 Block Diagram Doc. No: SAS1-XXXX-A Active Area 1.50" 128(RGB) x 128 Pixels G127 G126 VDDH VSSH S383 G1 S0 ~ ~~~ ~ SEPS225 OSCA1 EXPORT1 CPU PS D17 D9 RS CSB RDB WRB RESETB OSCA2 VDDH VSSH VSSH VSSH IREF VDD VSS NC ~ NC R1 C3 R2 C1 C2 VDDH VDD MCU Interface Selection: PS, CPU Pins connected to MCU interface: D17~D9, RDB, RS, CSB, WRB, and RESB * EXPORT1would be left float. C1: C2, C3: R1: R2: 1µF 4.7µF 10kΩ 68kΩ G0 4 Univision Technology Inc. 2. Absolute Maximum Ratings Parameter Supply Voltage Driver Supply Voltage Operating Temperature Storage Temperature Symbol VDD VDDH TOP TSTG Min -0.3 -0.3 -30 -40 Max 4 19.5 70 80 Doc. No: SAS1-XXXX-A Unit V V °C °C Notes 1, 2 1, 2 - Note 1: All the above voltages are on the basis of “GND = 0V”. Note 2: When this module is used beyond the above absolute maximum ratings, permanent breakage of the module may occur. Also, for normal operations, it is desirable to use this module under the conditions according to Section 3. “Electrical Characteristics”. If this module is used beyond these conditions, malfunctioning of the module can occur and the reliability of the module may deteriorate. 5 Univision Technology Inc. 3. Electrical Characteristics 3.1 DC Characteristics Characteristics Supply Voltage Driver Supply Voltage High Level Input Low Level Input High Level Output Low Level Output Symbol VDD VDDH VIH VIL VOH VOL Conditions Min 2.6 0.8×VDD 0 VDD-0.4 - Doc. No: SAS1-XXXX-A Typ 2.8 13 - Max Unit 3.3 VDD 0.4 0.4 V V V V V V 6 Univision Technology Inc. 3.2 AC Characteristics Doc. No: SAS1-XXXX-A 3.2.1 68XX-Series MPU Parallel Interface Timing Characteristics: (VDD = 2.8V, Ta = 25℃) Symbol tAH6 tAS6 tCYC6 Description Address hold timing Address setup timing System cycle timing Condition Min Max Unit 5 5 100 45 45 40 10 ns ns ns ns ns ns ns DB[17:0] E Port CSB RS tWRLW6 Write “L” pulse width tWRHW6 Write “H” pulse width tDS6 tDH6 Data setup timing Data hold timing *All the timing reference is 10% and 90% of VDD. 7 Univision Technology Inc. Symbol tAH6 tAS6 tCYC6 Description Address hold timing Address setup timing System cycle timing Condition - Doc. No: SAS1-XXXX-A (VDD = 2.8V, Ta = 25℃) Min Max Unit 10 10 200 90 90 0 70 ns ns ns ns ns ns ns DB[17:0] RDB Port CSB RS tRDLR6 Read “L” pulse width tRDHR6 Read “H” pulse width Read data output delay tRDD6 time CL = 15 pF tRDH6 Data hold timing *All the timing reference is 10% and 90% of VDD. 8 Univision Technology Inc. Doc. No: SAS1-XXXX-A 3.2.2 80XX-Series MPU Parallel Interface Timing Characteristics: (VDD = 2.8V, Ta = 25℃) Symbol tAH8 tAS8 tCYC8 Description Address hold timing Address setup timing System cycle timing Condition Min Max Unit 5 5 100 45 45 30 10 ns ns ns ns ns ns ns DB[17:0] WRB Port CSB RS tWRLW8 Write “L” pulse width tWRHW8 Write “H” pulse width tDS8 tDH8 Data setup timing Data hold timing *All the timing reference is 10% and 90% of VDD. 9 Univision Technology Inc. Symbol tAH8 tAS8 tCYC8 Description Address hold timing Address setup timing System cycle timing Condition - Doc. No: SAS1-XXXX-A (VDD = 2.8V, Ta = 25℃) Min Max Unit 5 5 200 90 90 0 60 ns ns ns ns ns ns ns DB[17:0] RDB Port CSB RS tRDLR8 Read “L” pulse width tRDHR8 Read “H” pulse width Read data output delay tRDD8 time CL = 15 pF tRDH8 Data hold timing *All the timing reference is 10% and 90% of VDD. 10 Univision Technology Inc. 3.2.3 Serial Interface Timing Characteristics: Doc. No: SAS1-XXXX-A (VDD = 2.8V, Ta = 25℃) Symbol tCYCS tSHW tSLW tDSS tDHS tCSS tCSH Description Serial clock cycle SCL “H” pulse width SCL “L” pulse width Data setup timing Data hold timing CSB­SCL timing CSB­hold timing Condition Min Max Unit 60 25 25 25 25 25 25 ns ns ns ns ns ns ns SDI CSB Port SCL *All the timing reference is 10% and 90% of VDD. 11 Univision Technology Inc. 3.3 Optics & Electrical Characteristics Characteristics Brightness (White) C.I.E. (White) C.I.E. (Red) C.I.E. (Green) C.I.E. (Blue) Dark Room Contrast View Angle Symbol Lbr (x) (y) (x) (y) (x) (y) (x) (y) CR Conditions With Polarizer (Note 3) With Polarizer With Polarizer With Polarizer With Polarizer Min 70 Doc. No: SAS1-XXXX-A Typ 90 Max Unit 0.32 0.37 0.68 0.39 0.34 0.69 0.18 0.23 degree cd/m2 0.24 0.28 0.29 0.33 0.60 0.64 0.31 0.35 0.26 0.30 0.61 0.65 0.10 0.14 0.15 0.19 >1000:1 >160 - * Optical Measurement Follow the Software Initial Setting with Sec. 4.4 “Initial Sequence & Setting Value” 3.4 General Electrical Specification Characteristics Supply Voltage Supply Voltage for I/O Pins Driver Supply Voltage Operating Current for VDD Operating Current for VCC Symbol VDD VDDIO VCC IDD ICC Note 3 Note 4 Note 5 Note 4 Note 5 Conditions Min 2.6 1.5 Typ 2.8 2.8 13 2.5 2.5 19 30 Max Unit 3.5 3.5 3.5 3.5 23 36 V V V mA mA mA mA Sleep Mode Current for IDD, SLEEP 1 mm (Perpendicular to edge) X Panel General Chipping Minor Y X Y 16 Univision Technology Inc. Check Item Classification Doc. No: SAS1-XXXX-A 6.3.1 Cosmetic Check (Display Off) in Non-Active Area (Continued) Criteria Any crack is not allowable. Panel Crack Minor Cupper Exposed (Even Pin or Film) Minor Not Allowable by Naked Eye Inspection Film or Trace Damage Minor Not Allowable Terminal Lead Twist Minor Not Allowable Terminal Lead Broken Minor Terminal Lead Probe Mark Acceptable Ok 17 Univision Technology Inc. Check Item Classification Doc. No: SAS1-XXXX-A 6.3.1 Cosmetic Check (Display Off) in Non-Active Area (Continued) Criteria NG if any bent lead cause lead shorting. Minor Terminal Lead Bent (Not Twist or Broken) NG for horizontally bent lead more than 50% of its width. Minor Glue or Contamination on Pin (Couldn’t Be Removed by Alcohol) Ink Marking on Back Side of panel (Exclude on Film) Minor Acceptable Ignore for Any 18 Univision Technology Inc. 6.3.2 Cosmetic Check (Display Off) in Active Area Doc. No: SAS1-XXXX-A It is recommended to execute in clear room environment (class 10k) if actual in necessary. Check Item Any Dirt & Scratch on Protective Film Scratches, Fiber, Line-Shape Defect (On Polarizer) Dirt, Spot-Shape Defect (On Polarizer) Classification Acceptable Criteria Ignore for Any W ≤ 0.1 Minor Ignore W ≤ 0.1 Ignore W > 0.1, L ≤ 2 n≤1 L>2 n=0 Φ ≤ 0.1 Ignore 0.1