Digital Panel Meters Modular signal conditioner Type USC-DIN
• • • • • • • • • • • • Multi-input modular signal’s conditioner 0.1% RDG basic accuracy TRMS AC current and voltage measurements AC/DC current measurements; selectable full scales (200µA to 5A) AC/DC voltage measurements; selectable full scales (200mV to 500V) °C or °F temperature measurements (Pt100-250-500-1000, Ni100, TC J-K-S-T-E) Resistance measurements; selectable full scales (20Ω to 20kΩ) Up to 4 independent alarm set-points (optional) 20mA/10VDC analog output (optional) Serial port RS485 or RS232 (optional) MODBUS, JBUS communication protocol Front protection degree: IP 20
• Linearization of V and A inputs up to 16 points
Product Description
µp-based signal’s conditioner, for current, voltage, temperature and resistance measurements. Measuring ranges and functions easily programmable from the PC by means of optional UscSoft software available on request. UscSoft includes programming, display and min-max functions. Conditioner’s housing for DINRAIL mounting with front protection degree: IP 20. All displaying and programming data are referred to UscSoft.
How to order
Model Slot A Slot B Slot C Slot D Slot E Options
USC XXX XX XX XX X XX
How to order
UscSoft-kit
UscSoft-kit: software plus “UCOM1” communication cable for programming USC by means of PC.
Type Selection
Slot A (measuring inputs) LSX: single channel input: 0.2-2-20mA DC/AC, 0.2-2-20V DC/AC LSE/ LSF: single + AUX input : 0.2-2-20mA DC/AC; 0.2-2-20V DC/AC HSX: single channel input: 0.2-2-5A DC/AC; 20-200-500V DC/AC TRX: signal input: TC temperature probes: J-K-ST-E, Pt100-250-5001000 and resistance 0.02-0.2-2-20kΩ Slot B (communication) XX: SX: SY: None Serial port RS485 Serial port RS232 Slot C (communication and alarm) XX: R1: None Single relay output, (AC1-8AAC, 250VAC) R2: Dual relay output, (AC1-8AAC, 250VAC) R4: Dual relay output, (AC1-8AAC, 250VAC) + dual open collector output (NPN, 100mA) R5: 4 Relay outputs (AC15AAC, 250VAC) AV(*): Single analogue output: 0 to 20mA DC and 0 to 10V DC Slot D (communication) XX: None AV(*): Single analogue output, 0 to 20mA DC and 0 to 10V DC (*): The two analogue outputs cannot be used at the same time. It is possible to plug in only one module by signal conditioner.
Options XX: TX: None Tropicalization
Slot E (power supply) H: L: 90 to 260V AC/DC 18 to 60V AC/DC
Specifications are subject to change without notice
USCDS040706
1
USC
USC architecture
AUXILIARY DIGITAL INPUTS (FUTURE FUNCTION)
Remote programming by means of PC 1 alarm 2 alarms
4 alarms
ALARM OUTPUTS COMMUNICATION
Analogue outputs: 1 x 20mA/10V DC Serial ports: RS485 RS232
Measuring inputs: DC/AC: mA-mV-V DC/AC: A-V °C/°F: TC-Pt-Ni-Ω Digital input: Alarm reset Auxiliary power supply: 13V / 50mA DC 25V / 25mA CC
POWER SUPPLY INTERNAL BUS MEASURING INPUTS + DIGITAL INPUTS + AUXILIARY POWER SUPPLY
90 to 260V AC/DC 18 to 60V AC/DC
Input Specifications
Analogue inputs BQ LSX module BQ LSE/LSF module BQ HSX module BQ TRX module BQ TRX module Digital inputs (CMD) Number of inputs Use Contact reading signal Close contact resistance Open contact resistance Insulation Accuracy (RS485) Measuring module 1, mA and V DC/AC 1, mA and V DC/AC + AUX 1, A and V DC/AC 1, temperature 1, resistance Incl. in the measuring module 1 (voltage-free) Reset of latch alarms BQ xxx:
很抱歉,暂时无法提供与“USC-DINLSXSYR5HTX”相匹配的价格&库存,您可以联系我们找货
免费人工找货