USF271

USF271

  • 厂商:

    ETC2

  • 封装:

  • 描述:

    USF271 - Ultra-Stable Low TC Film Resistors - List of Unclassifed Manufacturers

  • 详情介绍
  • 数据手册
  • 价格&库存
USF271 数据手册
Type USF Ultra-Stable Low TC Film Resistors 200 Series and 300 Series New Zero Nominal TC — Maximum Absolute TC to 2 ppm/°C, -40°C to +85°C ref. to +25°C Absolute Tol. to ±0.01%, Resistance Range 50 Ohm to 25 Megohm, Voltage Ratings up to 2500 Volts The USF Ultra-Stable Low TC Ultra-Precision Film Resistors were developed to meet the requirements for increasing performance for resistors in high performance analog electronics. Utilizing Caddock proprietary resistance film systems, the Type USF resistors provide the Lowest TC with the Widest Resistance Range and the Highest Voltage Ratings available in the industry. Page 1 of 2 • Resistance Range 50 ohm to 25 Megohm. • Temperature Coefficient -40°C to +85°C, referenced to +25°C • Tolerance: ±0.01% or ±0.10%. • Specific standard resistance values are available that are most 200 Series — ZERO Nominal TC — Maximum Absolute TC 2 ppm/°C 300 Series — ZERO Nominal TC — Maximum Absolute TC 5 ppm/°C • 300 Series “matched pairs” are available with ratio TC as tight as • Ceramic package provides cool operation. 0.5 ppm/°C. Contact Applications Engineering. commonly required in high accuracy analog design. These values were selected and optimized for produceability and performance. Type USF 200 Series Ultra-Stable Resistors • Type USF Ultra-Stable Resistors are offered in standard resistance values that are most commonly used in precision analog design. These standard resistance values can be used in precise amplifier gain setting, precise resistor bridge circuits, precise transducer sense circuits, and precise voltage dividers with up to 2500 volt input voltage. Extremely Low Power Coefficient (Wattage Coefficient): Type USF resistors are constructed with an aluminum oxide ceramic sandwich which provides great thermal conductivity. The ceramic sandwich package very effectively minimizes the power coefficient drift. Power coefficient is the resistance drift due to temperature rise in the element caused by the power (wattage) dissipation in the resistor where the selfheating temperature rise of the resistor element results in TC drift (temp. rise in °C, times the temperature coefficient of the resistor). In the USF package, heat is pulled away from the resistance material efficiently by this ceramic sandwich package construction. Plastic molded Low TC foil resistors cannot provide this outstanding benefit since the plastic impedes the flow of heat, causing greater temperature rise at the resistor element and greater self-heating related resistance drift due to power dissipation. The USF 200 Series resistors provide a new level of performance with near ZERO TC, very low power coefficient, wide resistance range, and higher voltage ratings than is offered by other resistor technologies. Model Number USF240 USF270 USF271 USF340 @ +85°C • Constructed with two selected USF 300 Series Resistors bonded back to back to achieve outstanding low Absolute Temperature Coefficient performance. The resistors are to be connected in parallel on the circuit board. ZERO Nominal TC — Max. Absolute TC: 2 ppm/°C, -40°C to +85°C, referenced to +25°C Type USF 300 Series Ultra-Stable Resistors • ZERO Nominal TC — Max. Absolute TC: 5 ppm/°C, -40°C to +85°C, referenced to +25°C Fig. 1 1 1 2 2 2 Dimensions inches (mm) A Wattage Maximum Continuous Oper. Voltage Resistance Min. Max. Temperature Coefficient B .375 ±.020 (9.53 ±.51) .500 ±.020 (12.70 ±.51) .500 ±.020 (12.70 ±.51) .375 ±.020 (9.53 ±.51) .500 ±.020 (12.70 ±.51) .500 ±.020 (12.70 ±.51) C D 0.33 0.75 0.75 0.33 0.75 300 1,400 2,500 300 1,400 50 Ω 990 K 9.9 Meg 50 Ω 990 K 19.8 Meg 10 Meg 5 Meg 10 Meg 20 Meg 10 Meg 25 Meg 2 ppm/°C 2 ppm/°C 2 ppm/°C 5 ppm/°C .750 ±.020 (19.05 ±.51) 1.500 ±.020 (38.10 ±.51) 1.500 ±.020 (38.10 ±.51) .750 ±.020 (19.05 ±.51) 1.500 ±.020 (38.10 ±.51) 1.500 ±.020 (38.10 ±.51) .425 Max. (10.8 Max.) .550 Max. (13.97 Max.) .550 Max. (13.97 Max.) .395 Max. (10.03 Max.) .520 Max. (13.21 Max.) .520 Max. (13.21 Max.) .600 ±.020 (15.24 ±.51) 1.350 ±.020 (34.29 ±.51) 1.350 ±.020 (34.29 ±.51) .600 ±.020 (15.24 ±.51) 1.350 ±.020 (34.29 ±.51) 1.350 ±.020 (34.29 ±.51) USF370 USF371 5 ppm/°C 5 ppm/°C 0.75 2,500 Applications Engineering 17271 North Umpqua Hwy. Roseburg, Oregon 97470-9422 Phone: (541) 496-0700 Fax: (541) 496-0408 © 2004 Caddock Electronics, Inc. CADDOCK e-mail: caddock@caddock.com • web: www.caddock.com For Caddock Distributors listed by country see caddock.com/contact/dist.html Sales and Corporate Office 1717 Chicago Avenue Riverside, California 92507-2364 Phone: (951) 788-1700 Fax: (951) 369-1151 28_IL134.1004 Type USF Ultra-Stable Low TC Film Resistors 200 Series and 300 Series Standard Resistance Values: 50.0 Ω 100 Ω 200 Ω 250 Ω 350 Ω 500 Ω 900 Ω 1.00 K 2.00 K 2.50 K 5.00 K 9.00 K 10.0 K 20.0 K 25.0 K 50.0 K 90.0 K 99.0 K 100 K 200 K Page 2 of 2 USF240 Standard Resistance Values: Absolute Tolerance: ±0.01% or ±0.10%, Absolute TC: 2ppm/°C 250 K 500 K 1.00 Meg 2.00 Meg Fig. 1 USF 200 Series Top View A Dimensions in inches and (millimeters) 2.50 Meg 10.0 Meg 5.00 Meg 9.90 Meg 9.99 Meg .160 ±.030 (4.06 ±.76) B USF270 Standard Resistance Values: 990 K 1.00 Meg 2.00 Meg 5.00 Meg Absolute Tolerance: ±0.01% or ±0.10%, Absolute TC: 2ppm/°C Front View .032 DIA. (.81 DIA.) CADDOCK USF240 0418 (seated height) C USF271 Standard Resistance Values: 9.90 Meg 9.99 Meg 10.0 Meg Absolute Tolerance: ±0.01% or ±0.10%, Absolute TC: 2ppm/°C .50 ±.125 (12.70 ±3.18) USF340 Standard Resistance Values: 50.0 Ω 100 Ω 200 Ω 350 Ω 400 Ω 500 Ω 700 Ω 1.00 K 1.80 K 2.00 K 4.00 K 5.00 K 10.0 K 18.0 K 20.0 K 40.0 K 50.0 K 90.0 K 99.0 K 100 K 180 K 198 K 200 K 400 K Side View .200 ±.020 (5.08 ±.51) Absolute Tolerance: ±0.01% or ±0.10%, Absolute TC: 5ppm/°C 500 K 990 K 999 K 1.00 Meg 2.00 Meg 4.00 Meg 5.00 Meg 9.90 Meg USF370 Standard Resistance Values: 990 K 1.98 Meg 4.00 Meg 9.90 Meg 10.0 Meg 1.00 Meg 2.00 Meg 5.00 Meg 9.99 Meg 9.99 Meg 10.0 Meg 19.8 Meg 19.98 Meg 20.0 Meg D Absolute Tolerance: ±0.01% or ±0.10%, Absolute TC: 5ppm/°C USF 200 Series Circuit Board Connection Note: The Type USF 200 Series Resistor must have the two “bonded” resistors in the package connected in parallel on the circuit board as shown. This parallel connection of the two resistors achieves the specified resistance with the specified performance. Circuit Board Trace Circuit Board Trace USF371 Standard Resistance Values: 19.8 Meg 19.98 Meg 20.0 Meg 25.0 Meg Absolute Tolerance: ±0.01% or ±0.10%, Absolute TC: 5ppm/°C Specifications: Resistance Tolerance: ±0.01% or ±0.10 measured at +23°C ±2°C. Absolute Temperature Coefficient: TC referenced to +25°C, ΔR taken at -40°C and +85°C. Load Life Stability: 2,000 hours at +85°C at rated voltage, not to exceed rated power, ΔR (+0.015 ±0.015)% max. 10,000 hours at +85°C at rated voltage, not to exceed rated power, ΔR (+0.030 ±0.030)% max. Thermal Shock: Mil-Std-202 Method 107 condition A, except min. temp. is -40°C, ΔR ±0.01% maximum. Voltage Coefficient: USF270 at 5 Meg, and USF271, USF370, USF371 at resistances of 9 Meg or greater, 0.02 ppm/volt maximum. Shelf Life Stability: Typical +(20ppm ±20ppm)/yr. after 1 year. Extended shelf life (ten years) 10ppm/year maximum. Operating Temperature: -40°C to +85°C. Leadwire: Solder Coated Copper. Fig. 2 USF 300 Series A .075 ±.020 (1.91 ±.51) Front View CADDOCK USF340 0412 B .50 ±.125 (12.70 ±3.18) (seated height) C .032 DIA. (.81 DIA.) Side View Dimensions in inches and (millimeters) D Custom USF 200 Series and 300 Series Resistors: USF 200 Series and 300 Series Resistors are available, for high quantity applications, with custom performance: • In the 200 Series, Absolute TC to as tight as 1ppm/°C is available for certain resistances. • Matched Ratio TC to as tight as 0.5ppm/°C for equal resistances. • Matched Ratio TC can be provided in the 200 Series style “bonded” Resistor pairs. Ordering Information USF200 Series: USF240 - 10.0 Meg - 0.01% - 2 ppm/°C Model Number Resistor Value Tolerance (0.01% or 0.10%) Other Low TC Resistor Products from Caddock: • • • • • • • Type TF Low TC Ultra-Precision Film Resistors (1K to 125Meg) Type TN Lab Grade Low TC Precision Film Resistors Type TK Low TC Precision Radial-Lead Film Resistors Type TG Low TC Precision High Voltage Resistors (up to 30KV) T912 and T914 Low TC Ultra-Precision Resistor Networks Type USVD Ultra-Stable Voltage Dividers (up to 2500V) Type THV Precision High Voltage Dividers (up to 20KV) Ordering Information USF300 Series: USF370 - 990K - 0.10% - 5 ppm/°C Model Number Resistor Value Tolerance (0.01% or 0.10%) Applications Engineering 17271 North Umpqua Hwy. Roseburg, Oregon 97470-9422 Phone: (541) 496-0700 Fax: (541) 496-0408 © 2004 Caddock Electronics, Inc. CADDOCK e-mail: caddock@caddock.com • web: www.caddock.com For Caddock Distributors listed by country see caddock.com/contact/dist.html Sales and Corporate Office 1717 Chicago Avenue Riverside, California 92507-2364 Phone: (951) 788-1700 Fax: (951) 369-1151 28_IL134.1004
USF271
1. 物料型号: - USF Ultra-Stable Low TC Film Resistors 200 Series和300 Series。

2. 器件简介: - USF系列电阻器是为了满足高性能模拟电子设备中电阻器的性能要求而开发的。这些电阻器使用Caddock专有的电阻膜系统,提供最低的温度系数(TC)、最宽的电阻范围和行业内最高的电压等级。

3. 引脚分配: - USF 200系列电阻器需要在电路板上并联连接两个“粘合”的电阻器,以实现规定的电阻和性能。

4. 参数特性: - 电阻范围:50欧姆至25兆欧。 - 温度系数:200系列为0至2ppm/°C,300系列为0至5ppm/°C(-40°C至+85°C,参考+25°C)。 - 容差:±0.01%或±0.10%。 - 电压等级:高达2500伏特。

5. 功能详解: - USF系列电阻器具有极低的功率系数(Wattage Coefficient),由于采用氧化铝陶瓷夹层结构,具有很好的导热性,有效减少了功率系数漂移。 - USF 200系列电阻器提供接近零TC、非常低的功率系数、宽电阻范围和比其他电阻技术更高的电压等级。

6. 应用信息: - USF系列电阻器适用于精确放大器增益设置、精确电阻桥电路、精确传感器感应电路和精确电压分压,输入电压高达2500伏特。

7. 封装信息: - 提供了USF 200系列和300系列的尺寸图,包括英寸和毫米单位的尺寸。
USF271 价格&库存

很抱歉,暂时无法提供与“USF271”相匹配的价格&库存,您可以联系我们找货

免费人工找货