FLM5053-8F

FLM5053-8F C-Band Internally Matched FET FEATURES • • • • • • High Output Power: P1dB = 39.5dBm (Typ.) High Gain: G1dB = 9.5dB (Typ.) High PAE: ηadd = 36% (Typ.) Low IM3 = -46dBc@Po = 28.5dBm Broad Band: 5.0 ~ 5.3GHz Impedance Matched Zin/Zout = 50Ω DESCRIPTION The FLM5053-8F is a power GaAs FET that is internally matched for standard communication bands to provide optimum power and gain in a 50 ohm system. Eudyna’s stringent Quality Assurance Program assures the highest reliability and consistent performance. ABSOLUTE MAXIMUM RATING (Ambient Temperature Ta=25°C) Item Drain-Source Voltage Gate-Source Voltage Total Power Dissipation Storage Temperature Channel Temperature Symbol VDS VGS PT Tstg Tch Tc = 25°C Condition Rating 15 -5 42.8 -65 to +175 175 Unit V V W °C °C Eudyna recommends the following conditions for the reliable operation of GaAs FETs: 1. The drain-source operating voltage (VDS) should not exceed 10 volts. 2. The forward and reverse gate currents should not exceed 32.0 and -4.4 mA respectively with gate resistance of 100Ω. ELECTRICAL CHARACTERISTICS (Ambient Temperature Ta=25°C) Item Saturated Drain Current Transconductance Pinch-off Voltage Gate Source Breakdown Voltage Output Power at 1dB G.C.P. Power Gain at 1dB G.C.P. Drain Current Power-added Efficiency Gain Flatness 3rd Order Intermodulation Distortion Thermal Resistance Channel Temperature Rise CASE STYLE: IB Symbol IDSS gm Vp VGSO P1dB G1dB Idsr ηadd ∆G IM3 Rth ∆Tch f = 5.3 GHz, ∆f = 10 MHz 2-Tone Test Pout = 28.5dBm S.C.L. Channel to Case 10V x Idsr x Rth VDS =10V, IDS = 0.55 IDSS (Typ.), f = 5.0 ~ 5.3 GHz, ZS=ZL= 50 ohm Test Conditions VDS = 5V, VGS = 0V VDS = 5V, IDS = 2200mA VDS = 5V, IDS = 180mA IGS = -180µA Min. -1.0 -5.0 38.5 8.5 -44 Limit Typ. Max. 3900 5850 2000 -2.0 39.5 9.5 36 -46 3.0 -3.5 ±0.6 3.5 80 Unit mA mS V V dBm dB mA % dB dBc °C/W °C 2200 2600 G.C.P.: Gain Compression Point, S.C.L.: Single Carrier Level Edition 1.2 November 2004 1 FLM5053-8F C-Band Internally Matched FET POWER DERATING CURVE 50 OUTPUT POWER & IM3 vs. INPUT POWER VDS=10V f1 = 5.3 GHz f2 = 5.31 GHz 2-tone test Total Power Dissipation (W) 40 Output Power (S.C.L.) (dBm) 34 32 30 28 26 24 Pout 30 -20 -30 IM3 20 10 -40 -50 0 50 100 150 200 16 18 20 22 24 Case Temperature (°C) Input Power (S.C.L.) (dBm) S.C.L.: Single Carrier Level OUTPUT POWER vs. FREQUENCY VDS=10V P1dB Output Power (dBm) Pin=31.5dBm OUTPUT POWER vs. INPUT POWER VDS=10V f = 5.15 GHz Pout 42 40 38 36 Output Power (dBm) 38 27.5dBm 34 32 30 23.5dBm ηadd 30 15 30 19.5dBm 19 21 23 25 27 29 31 33 Input Power (dBm) 5.0 5.1 5.2 5.3 Frequency (GHz) 2 ηadd (%) 34 IM3 (dBc) 45 FLM5053-8F C-Band Internally Matched FET +j50 +j25 +j100 S11 S22 +90° SCALE FOR |S12| 0.2 S21 S12 5.5 +j10 5.3 5.6 4.7GHz 4.8 4.9 +j250 5.5 5.6 5.5 5.4 5.3 0.1 5.6 5.4 0 10 5.2 5.1 25 50Ω 100 5.0 250 180° 5.4 5.3 5.2 5.1 5.0 4.9 SCALE FOR |S21| 1 2 4.7GHz 4.8 3 4 4.7GHz 0° 5.6 5.5 4.9 5.4 4.8 5.3 5.2 5.1 4.8 -j10 5.0 -j250 4.7GHz 5.2 5.1 5.0 4.9 -j25 -j50 -j100 -90° FREQUENCY (MHZ) 4700 4800 4900 5000 5100 5200 5300 5400 5500 5600 S11 MAG .377 .434 .501 .543 .574 .597 .606 .600 .569 .532 ANG 74.8 46.3 13.3 -9.7 -31.2 -52.3 -80.0 -100.7 -128.6 -149.8 S-PARAMETERS VDS = 10V, IDS = 2200mA S21 S12 MAG ANG MAG ANG 3.164 3.173 3.148 3.128 3.130 3.146 3.170 3.213 3.205 3.234 -4.1 -26.8 -56.4 -77.9 -99.2 -120.8 -149.3 -171.0 159.8 137.5 .034 .039 .045 .050 .055 .060 .068 .073 .078 .083 -25.8 -54.3 -91.3 -117.6 -140.2 -163.7 167.2 145.0 117.6 97.6 S22 MAG .684 .644 .600 .570 .547 .526 .482 .445 .389 .373 ANG -78.4 -96.8 -121.9 -140.8 -159.7 -177.8 158.1 137.6 108.0 83.1 3 FLM5053-8F C-Band Internally Matched FET Case Style "IB" Metal-Ceramic Hermetic Package 2.0 Min. (0.079) 2-R 1.6±0.15 (0.063) 1 2 0.1 (0.004) 3 0.6 (0.024) 2.0 Min. (0.079) 2.6±0.15 (0.102) 5.2 Max. (0.205) 10.7 (0.421) 0.2 Max. (0.008) 1.45 (0.059) 12.9±0.2 (0.508) 12.0 (0.422) 17.0±0.15 (0.669) 21.0±0.15 (0.827) 1. Gate 2. Source (Flange) 3. Drain Unit: mm(inches) For further information please contact: CAUTION Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Eudyna Devices USA Inc. 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: (408) 232-9500 FAX: (408) 428-9111 www.us.eudyna.com • Do not put this product into the mouth. • Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. • Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices Europe Ltd. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 Eudyna Devices Asia Pte Ltd. Hong Kong Branch Rm. 1101, Ocean Centre, 5 Canton Rd. Tsim Sha Tsui, Kowloon, Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921 Eudyna Devices Inc. reserves the right to change products and specifications without notice. The information does not convey any license under rights of Eudyna Devices Inc. or others. © 2004 Eudyna Devices USA Inc. Printed in U.S.A. Eudyna Devices Inc. Sales Division 1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL: +81-45-853-8156 FAX: +81-45-853-8170 4