FLM6472-18F

FLM6472-18F FEATURES • • • • • • • High Output Power: P1dB = 43.0dBm (Typ.) High Gain: G1dB = 9.5dB (Typ.) High PAE: ηadd = 37% (Typ.) Low IM3 = -46dBc@Po = 32.0dBm Broad Band: 6.4 ~ 7.2GHz Impedance Matched Zin/Zout = 50Ω Hermetically Sealed Package C-Band Internally Matched FET DESCRIPTION The FLM6472-18F is a power GaAs FET that is internally matched for standard communication bands to provide optimum power and gain in a 50 ohm system. Eudyna’s stringent Quality Assurance Program assures the highest reliability and consistent performance. ABSOLUTE MAXIMUM RATING (Ambient Temperature Ta=25°C) Item Drain-Source Voltage Gate-Source Voltage Total Power Dissipation Storage Temperature Channel Temperature Symbol VDS VGS PT Tstg Tch Tc = 25°C Condition Rating 15 -5 83.3 -65 to +175 175 Unit V V W °C °C Fujitsu recommends the following conditions for the reliable operation of GaAs FETs: 1. The drain-source operating voltage (VDS) should not exceed 10 volts. 2. The forward and reverse gate currents should not exceed 48.0 and -8.4 mA respectively with gate resistance of 25Ω. ELECTRICAL CHARACTERISTICS (Ambient Temperature Ta=25°C) Item Saturated Drain Current Transconductance Pinch-off Voltage Gate Source Breakdown Voltage Output Power at 1dB G.C.P. Power Gain at 1dB G.C.P. Drain Current Power-added Efficiency Gain Flatness 3rd Order Intermodulation Distortion Thermal Resistance Channel Temperature Rise CASE STYLE: IK Symbol IDSS gm Vp VGSO P1dB G1dB Idsr ηadd ∆G IM3 Rth ∆Tch f = 7.2 GHz, ∆f = 10 MHz 2-Tone Test Pout = 32.0dBm S.C.L. Channel to Case 10V x Idsr x Rth VDS =10V, IDS = 0.65 IDSS (Typ.), f = 6.4 ~ 7.2 GHz, ZS=ZL= 50 ohm Test Conditions VDS = 5V, VGS = 0V VDS = 5V, IDS = 4875mA VDS = 5V, IDS = 250mA IGS = -250µA Min. -0.5 -5.0 42.0 8.5 -44 Limit Typ. Max. 7.5 7500 -1.5 43.0 9.5 11.25 -3.0 Unit A mS V V dBm dB mA % dB dBc °C/W °C 4875 6000 37 -46 1.6 ±0.6 1.8 80 G.C.P.: Gain Compression Point, S.C.L.: Single Carrier Level Edition 1.2 August 2004 1 FLM6472-18F C-Band Internally Matched FET POWER DERATING CURVE OUTPUT POWER & IM3 vs. INPUT POWER VDS=10V f1 = 7.2 GHz f2 = 7.21 GHz 2-tone test Total Power Dissipation (W) 38 -20 Pout Output Power (S.C.L.) (dBm) 100 80 60 40 20 36 34 32 30 28 26 24 -25 -30 IM3 -35 -40 -45 -50 -55 0 50 100 150 200 19 21 23 25 27 29 Case Temperature (°C) Input Power (S.C.L.) (dBm) S.C.L.: Single Carrier Level OUTPUT POWER vs. FREQUENCY 45 OUTPUT POWER vs. INPUT POWER VDS=10V f = 6.8 GHz Pout VDS=10V P1dB Output Power (dBm) Pin=34.5dBm 45 43 41 39 37 35 Output Power (dBm) 44 43 42 41 32.5dBm 45 ηadd 40 39 38 6.4 6.6 6.8 7.0 28.5dBm 30 15 0 7.2 23 25 27 29 31 33 35 Frequency (GHz) Input Power (dBm) 2 ηadd (%) 30.5dBm IM3 (dBc) FLM6472-18F C-Band Internally Matched FET +j50 +j25 +j100 S11 S22 +90° S21 S12 +j10 6.2 GHz 6.2 GHz 6.4 6.4 6.6 6.8 6.8 250 7.0 6.6 7.2 7.4 7.0 7.2 7.4 1 2 3 +j250 7.0 6.8 0 25 7.4 50Ω 7.2 7.0 180° 6.8 6.6 6.4 4 SCALE FOR |S21| 0° 6.6 7.4 6.2 GHz -j10 -j250 6.4 0.1 6.2 GHz -j25 -j50 -j100 0.2 -90° FREQUENCY (MHZ) 6200 6300 6400 6500 6600 6700 6800 6900 7000 7100 7200 7300 7400 S11 MAG .517 .521 .524 .519 .507 .490 .463 .426 .385 .345 .326 .349 .411 ANG 101.5 88.0 75.7 64.3 52.6 40.7 27.1 11.1 -9.3 -33.6 -66.5 -102.2 -134.0 S-PARAMETERS VDS = 10V, IDS = 4875mA S21 S12 MAG ANG MAG ANG 3.232 3.197 3.135 3.075 3.108 3.111 3.149 3.226 3.308 3.366 3.378 3.287 3.133 -103.7 -118.5 -130.9 -144.6 -158.3 -171.2 175.1 160.5 145.2 129.9 112.2 93.9 75.3 .062 .064 .066 .068 .071 .074 .079 .086 .090 .094 .096 .092 .087 -144.7 -159.2 -170.7 -176.9 164.6 152.8 139.3 125.2 110.1 95.4 77.0 57.5 39.6 SCALE FOR |S12| 7.2 S22 MAG .453 .445 .432 .424 .410 .391 .369 .339 .301 .259 .202 .141 .098 ANG 89.3 81.8 74.0 65.8 55.5 43.5 28.7 11.3 -9.4 -31.8 -59.4 -95.5 -149.0 3 FLM6472-18F C-Band Internally Matched FET Case Style "IK" Metal-Ceramic Hermetic Package 2.0 Min. (0.079) 1 0.1 (0.004) 2 0.6 (0.024) 14.9 (0.587) 2.0 Min. (0.079) 4-R 1.3±0.15 (0.051) 3 2.4±0.15 (0.094) 5.5 Max. (0.217) 1.4 (0.055) 17.4±0.3 (0.685) 8.0±0.2 (0.315) 1. Gate 2. Source (Flange) 3. Drain Unit: mm(inches) 20.4±0.3 (0.803) 24±0.5 (0.945) For further information please contact: CAUTION Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: Eudyna Devices USA Inc. 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: (408) 232-9500 FAX: (408) 428-9111 www.us.eudyna.com • Do not put this product into the mouth. • Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these by-products are dangerous to the human body if inhaled, ingested, or swallowed. • Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices Europe Ltd. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 Eudyna Devices Asia Pte Ltd. Hong Kong Branch Rm. 1101, Ocean Centre, 5 Canton Rd. Tsim Sha Tsui, Kowloon, Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921 Eudyna Devices Inc. reserves the right to change products and specifications without notice. The information does not convey any license under rights of Eudyna Devices Inc. or others. © 2004 Eudyna Devices USA Inc. Printed in U.S.A. Eudyna Devices Inc. Sales Division 1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL: +81-45-853-8156 FAX: +81-45-853-8170 4