FMM5820QH

FMM5820QH Ka-Band Power Amplifier MMIC FEATURES •High Output Power: P1dB = 36.0 dBm (Typ.) •High Linear Gain: GL = 23.0 dB(Typ.) •Frequency Band: 29.5 - 30.0 GHz •Impedance Matched Zin/Zout = 50Ω DESCRIPTION The FMM5820QH is a power amplifier MMIC that contains a fourstage amplifier, internally matched, for standard communications band in the 29.5 to 30.0GHz frequency range. This product is well suited for Ka-band V-SAT applications. Eudyna’s stringent Quality Assurance Program assures the highest reliability and consistent performance. ABSOLUTE MAXIMUM RATING(Case Temperature Tc=25℃) Item Symbol VDD DC Positive Supply Voltage VGG DC Negative Supply Voltage Pin Input Power Tstg Storage Temperature RECOMMENDED OPERATING CONDITIONS Item Symbol VDD DC Positive Supply Voltage Pin Input Power TC Operating Case Temperature This product should be hermetically packaged. Rating 10 -3 +24 -55 to +125 Unit V V dBm ℃ Recommend ≦7 ≦21 -40 to +85 Unit V dBm ℃ ELECTRICAL CHARACTERISTICS (Case Temperature Ta=25℃) Item RF Frequency Range Output Power at 1dB G.C.P. Power Gain at 1dB G.C.P. Power-added Efficiency at 1dB G.C.P. Drain Current at 1dB G.C.P. Input Return Loss (at Pin=-20dBm) Output Return Loss (at Pin=-20dBm) ESD Note : Based on EIAJ ED-4701C-111A (C=100pF, R=1.5kΩ) Symbol f P1dB G1dB Nadd IDDRF RLIN RLOUT Test Conditions VDD=+7V IDD=1500mA typ. ZS=ZL=50ohm Min. 29.5 34.5 18.0 - Limits Typ. Max. 30.0 36.0 22.0 26.0 25 2200 2800 -10 -15 ~199V Unit GHz dBm dB % mA dB dB Class 0 Edition 1.1 January 2006 1 http://www.eudyna.com/ FMM5820QH Ka-Band Power Amplifier MMIC Output Power vs. Frequency 38 36 Output Power [dBm] 34 32 30 28 26 24 22 27.5 28 28.5 29 29.5 30 30.5 31 31.5 Frequency [GHz] Pin=4dBm Pin=8dBm VDD=7V, IDD(DC)=1500mA Output Power, Drain Current vs. Input Power VDD=7V, IDD(DC)=1500mA 38 P1dB 3400 29.5GHz 29.75GHz 30.0GHz 29 5GH 36 34 Output Power [dBm] 32 30 28 26 24 22 20 18 16 3200 3000 2600 2400 2200 2000 Drain Current Pin=12dBm Pout 1800 1600 1400 1200 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 Input Power [dBm] Power Added Efficiency vs. Frequency VDD=7V, IDD(DC)=1500mA IMD vs. Output Power -15 Intermodulation Distortion [dBc] -20 -25 -30 -35 -40 -45 -50 -55 -60 18 20 22 24 26 28 30 32 34 36 2-tone Total Output Power [dBm] IM5 IM3 VDD=7V, IDD(DC)=1500mA 30 Power Added Eficiency [%] 25 20 15 10 5 0 27.5 28 28.5 29 29.5 30 Frequency [GHz] Pin=8dBm P1dB Pin=16dBm Pin=12dBm 29.5GHz 29.75GHz 30.0GHz 29 5GH Pin=4dBm 30.5 31 31.5 2 Drain Current [mA] Pin=16dBm 2800 FMM5820QH Ka-Band Power Amplifier MMIC Output Power, Drain Current vs. Input Power by Drain Voltage IDD(DC)=1500mA, f=29.5GHz Output Power, Drain Current vs. Input Power by Drain Voltage IDD(DC)=1500mA, f=29.75GHz 38 36 34 Output Power [dBm] 32 30 28 26 24 22 20 18 16 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 Input Power [dBm] Drain Current Pout 8V 7V 6V 5V 3400 3200 3000 Output Power [dBm] 38 36 34 8V 7V 6V 5V 8V 3400 3200 3000 2800 2600 Pout Drain Current [mA] 2800 2600 2400 2200 2000 1800 1600 1400 1200 32 30 28 26 24 22 20 18 16 2400 2200 2000 1800 1600 1400 1200 Drain Current -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 Input Power [dBm] Output Power, Drain Current vs. Input Power by Drain Voltage IDD(DC)=1500mA, f=30.0GHz Output Power, Gain vs. Drain Voltage IDD(DC)=1500mA 38 36 34 Output Power [dBm] 32 30 28 26 24 22 20 18 16 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 Input Power [dBm] Drain Current Pout 8V 7V 6V 5V 3400 3200 3000 2800 2600 2400 2200 2000 1800 1600 1400 1200 Drain Current [mA] P1dB [dBm] 38 37 36 35 34 33 32 31 30 4 5 6 7 VDD [V] 8 9 G1dB 29.5GHz 29.75GHz 30.0GHz 29 GH P1dB 28 27 26 G1dB [dB] 25 24 23 22 21 20 3 Drain Current [mA] FMM5820QH Ka-Band Power Amplifier MMIC Output Power, Drain Current vs. Input Power by Drain Current VDD=7V, f=29.5GHz Output Power, Drain Current vs. Input Power by Drain Current VDD=7V, f=29.75GHz 38 36 34 Output Power [dBm] 32 30 28 26 24 22 20 18 16 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 Input Power [dBm] Drain Current Pout 1700mA 1500mA 1300mA 3400 3200 3000 2800 2600 2400 2200 2000 1800 1600 1400 1200 Output Power [dBm] 38 36 34 1700m A 1500m A 1300m A 3400 3200 3000 2800 2600 Pout Drain Current [mA] 32 30 28 26 24 22 20 18 16 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 Input Power [dBm] Drain Current 2400 2200 2000 1800 1600 1400 1200 Output Power, Drain Current vs. Input Power by Drain Current VDD=7V, f=30.0GHz Output Power, Gain vs. Drain Voltage VDD=7V 38 36 34 Output Power [dBm] 32 30 28 26 24 22 20 18 16 -6 -4 -2 0 2 4 6 8 10 12 14 16 18 20 22 Input Power [dBm] Drain Current Pout 1700mA 1500mA 1300m A 3400 3200 3000 2800 2600 2400 2200 2000 1800 1600 1400 1200 Drain Current [mA] P1dB [dBm] 38 37 36 35 34 33 32 31 30 1200 1300 1400 1500 1600 IDD(DC) [mA] 1700 G1dB 29.5GHz 29.75GHz 30.0GHz P1dB 28 27 26 G1dB [dB] 25 24 23 22 21 20 1800 4 Drain Current [mA] FMM5820QH Ka-Band Power Amplifier MMIC IMD vs. Output Power by Drain Voltage IDD(DC)=1500mA, f=29.5GHz IMD vs. Output Power by Drain Voltage IDD(DC)=1500mA, f=29.75GHz -15 -15 Intermodulation Distortion [dBc] 8V 7V 6V 5V Intermodulation Distortion [dBc] -20 -25 -30 -35 -40 -45 -50 -55 -60 20 22 -20 -25 -30 -35 -40 -45 -50 -55 -60 20 22 8V 7V 6V 5V IM3 IM3 IM5 IM5 24 26 28 30 32 34 36 24 26 28 30 32 34 36 2-tone Total Output Power [dBm] 2-tone Total Output Power [dBm] IMD vs. Output Power by Drain Voltage IDD(DC)=1500mA, f=30.0GHz -15 Intermodulation Distortion [dBc] -20 -25 -30 -35 -40 -45 -50 -55 -60 20 22 24 26 28 30 32 34 36 2-tone Total Output Power [dBm] IM5 IM3 8V 7V 6V 5V 5 FMM5820QH Ka-Band Power Amplifier MMIC IMD vs. Output Power by Drain Current VDD=7V, f=29.5GHz IMD vs. Output Power by Drain Current VDD=7V, f=29.75GHz -15 Intermodulation Distortion [dBc] -20 -25 -30 -35 -40 -45 -50 -55 -60 20 22 24 26 28 30 32 34 36 2-tone Total Output Power [dBm] IM5 IM3 -15 Intermodulation Distortion [dBc] 1700mA 1500mA 1300mA 1700 A -20 -25 -30 -35 -40 -45 -50 -55 -60 20 1700m A 1500m A 1300m A 1700 A IM3 IM5 22 24 26 28 30 32 34 36 2-tone Total Output Power [dBm] IMD vs. Output Power by Drain Current VDD=7V, f=30.0GHz -15 Intermodulation Distortion [dBc] -20 -25 -30 -35 -40 -45 -50 -55 -60 20 22 24 26 28 30 32 34 36 2-tone Total Output Power [dBm] IM5 IM3 1700mA 1500mA 1300mA 6 FMM5820QH Ka-Band Power Amplifier MMIC S-Parameter VDD=7V, IDD=1500mA 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 0 S21 S11 S22 Sxx [dB] 5 10 15 20 25 30 35 40 Frequency [GHz] 30 25 20 15 10 5 0 -5 -10 -15 -20 -25 -30 27 28 29 30 31 32 Frequency [GHz] S21 S11 S22 Sxx [dB] 33 7 FMM5820QH Ka-Band Power Amplifier MMIC S-Parameter VDD=7V, IDD=1500mA Frequency S11 [GHz] MAG ANG 1.0 0.99 -34.5 2.0 0.94 -68.2 3.0 0.87 -100.3 4.0 0.78 -131.2 5.0 0.69 -160.0 6.0 0.61 172.4 7.0 0.54 144.9 8.0 0.46 117.0 9.0 0.39 88.7 10.0 0.33 59.1 11.0 0.28 27.4 12.0 0.25 -6.1 13.0 0.23 -40.0 14.0 0.22 -74.6 15.0 0.22 -105.9 16.0 0.22 -135.8 17.0 0.21 -165.4 18.0 0.21 165.3 19.0 0.20 134.4 20.0 0.19 103.8 21.0 0.19 70.3 22.0 0.20 35.9 23.0 0.23 2.6 24.0 0.27 -29.0 25.0 0.31 -57.9 26.0 0.35 -86.3 27.0 0.39 -114.9 28.0 0.38 -150.7 29.0 0.21 151.2 30.0 0.12 -123.6 31.0 0.17 -134.2 32.0 0.29 -140.8 33.0 0.35 -171.6 34.0 0.35 165.1 35.0 0.33 141.5 36.0 0.30 117.3 37.0 0.26 90.9 38.0 0.22 59.2 39.0 0.19 22.3 40.0 0.17 -20.3 S21 MAG ANG 0.00 -117.8 0.00 131.5 0.00 175.5 0.00 -165.2 0.00 -64.6 0.00 -53.0 0.00 -25.2 0.00 40.3 0.00 74.2 0.00 130.3 0.00 -160.3 0.01 -144.6 0.01 -134.8 0.01 -134.7 0.00 -25.0 0.00 50.1 0.00 116.1 0.01 107.9 0.01 130.9 0.01 155.0 0.00 127.9 0.00 -38.8 0.01 -25.1 0.01 -128.4 0.10 142.9 0.67 46.3 3.09 -88.2 10.15 113.8 15.32 -57.8 12.81 150.5 9.00 10.2 5.31 -115.2 3.17 126.8 1.72 14.8 0.85 -91.9 0.42 170.5 0.20 67.7 0.09 -39.6 0.04 -136.1 0.02 -156.4 S12 MAG ANG 0.00 -47.1 0.00 18.1 0.00 -159.3 0.00 149.3 0.00 2.0 0.00 -0.3 0.00 -42.0 0.00 60.1 0.00 -36.7 0.00 -100.5 0.00 -72.5 0.00 -118.7 0.00 -134.4 0.00 -171.8 0.00 162.1 0.00 -165.7 0.00 161.4 0.00 120.5 0.01 107.2 0.00 89.4 0.00 45.6 0.00 -6.7 0.00 -26.4 0.00 -83.2 0.00 36.5 0.00 -18.3 0.00 -84.9 0.00 -94.9 0.00 -164.1 0.00 172.3 0.00 158.0 0.00 80.9 0.00 -114.1 0.00 85.6 0.01 12.9 0.00 -27.8 0.00 -53.7 0.00 -77.5 0.01 -119.2 0.01 -114.8 S22 MAG ANG 0.99 -83.8 0.96 -141.7 0.96 177.1 0.97 143.8 0.97 114.5 0.96 86.8 0.94 60.4 0.91 35.9 0.89 13.5 0.89 -8.9 0.90 -32.0 0.91 -55.5 0.91 -78.9 0.91 -101.8 0.91 -125.1 0.91 -148.1 0.91 -170.9 0.91 165.1 0.91 139.5 0.89 112.9 0.86 85.3 0.84 55.8 0.81 23.9 0.78 -10.7 0.76 -50.2 0.65 -97.4 0.48 -133.9 0.42 -177.2 0.30 116.0 0.16 24.3 0.15 -73.3 0.19 -127.0 0.21 -175.2 0.19 122.8 0.19 29.5 0.35 -58.3 0.55 -119.6 0.69 -168.7 0.74 147.8 0.74 106.3 8 FMM5820QH Ka-Band Power Amplifier MMIC ∆Tch vs. Drain Voltage (Reference) 50 45 40 35 ∆ Tch (℃ ) 30 25 20 15 10 5 0 4 5 IDD=1500mA 6 VDD (V) 7 8 9 MTTF vs. Tch 1.E+12 1.E+11 1.E+10 1.E+09 MTTF (hrs) 1.E+08 1.E+07 1.E+06 1.E+05 1.E+04 1.E+03 1.E+02 1.E+01 50 100 150 Tch ( ℃ ) 200 250 Ea=1.56eV 9 FMM5820QH Ka-Band Power Amplifier MMIC ■ Package Outline PIN ASSIGNMENT 1:RF IN 2:VGG 3:N.C. 4:VDD 5:RF OUT 6:N.C. 7:N.C. 8:N.C. 10 FMM5820QH Ka-Band Power Amplifier MMIC ■ Block Diagram and Recommended Bias Circuit VGG VDD 1uF 1uF 1:RF IN 2:VGG 3:N.C. 4:VDD 5:RF OUT 6:N.C. 7:N.C. 8:N.C. Note:The capacitors are recommended on the bias supply line, close to the package, in order to prevent video oscillations which could damage the module. 11 FMM5820QH Ka-Band Power Amplifier MMIC ■ Mounting Instructions for QH Package (1) The package may be attached using screws. Torque conditions are shown in Table 1. Table 1. Recommended and Maximum Torque for Screw Mounting Recommended Recommended Maximum Torque screw Torque QH M1.6* 15 N-cm (1.3 lb-in) 20 N-cm (1.8 lb-in) *Mounting with flat washer is recommended. Package (2) First, tighten the screws with a torque driver set to 5 N-cm. (3) The surface finish of the heat sink should be better than 0.8µm, and the surface flatness must be better than 10 µm. (4) Silicon based heat sink compounds should not be used for the thermal conductive grease. They cause poor grounding of the source flange, contamination and long term degradation of thermal resistance between the MMIC package and the heat sink. (5) The DC and RF interconnects may be gold bondwires or gold ribbons. The RF interconnects should be as short as possible. 12 FMM5820QH Ka-Band Power Amplifier MMIC Humidity Lifetime for FMM5820QH The following graph shows the lifetime of moisture resistance for the FMM5820QH. Each line in the graph indicates the lifetime that is the estimated failure rate of 0.1% at 10 years (Confidence Level = 90 %) and calculated from the results of pressure cooker (autoclave) bias test. The horizontal-axis shows typical ambient temperature. The vertical-axis shows relative humidity. The left side of the area delimited in each line indicates more than 10 years of lifetime. Field environmental conditions for operation In the case that FMM5820QH is mounted in a non-hermetic package, please refer to the following recommendations. Note 1. The graph lines are drawn using the operating conditions as shown in the box below. EUD recommends our customers use FMM5820QH within the left side area separated by each line in the graph below. Note 2. Please cut off the drain current by drain bias, not by gate bias. The humidity lifetime becomes shorter in case of gate cut off operation. Note 3. Please use FMM5820QH under environmental conditions of no dew condensation. Field Environmental Conditions for a 10 years Lifetime 100% 90% 80% Relative Humidity (%) 70% 60% 50% 40% 30% 20% 10% 0% 0 10 20 30 40 50 60 70 80 90 Typical Ambient Temperature (deg-C) ( ℃) Field Environmental Conditions. [Gate cut off operating] (Vdd=6V, Vgg=0V Vdd=6V, Vgg=0V 24 24 hours/day Cut off 12 hours/day Cut off 6 hours/day Cut off 3 hours/day Cut off -1 V) (Vgg=-0V, Vdd=6V Vgg=-0V, Vdd=6V [Drain cut off operating] --- 0 hours/day Cut off --- 12 hours/day Cut off --- 18 hours/day Cut off 0V) 13 FMM5820QH Ka-Band Power Amplifier MMIC For further information please contact : Eudyna Devices USA Inc. 2355 Zanker Rd. San Jose, CA 95131-1138, U.S.A. TEL: +1 408 232-9500 FAX: +1 408 428-9111 Eudyna Devices Europe Ltd. Network House Norreys Drive Maidenhead, Berkshire SL6 4FJ United Kingdom TEL: +44 (0) 1628 504800 FAX: +44 (0) 1628 504888 Eudyna Devices International Srl Via Teglio 8/2 - 20158 Milano, Italy TEL: +39-02-8738-1695 Eudyna Devices Asia Pte. Ltd. Hong Kong Branch Suite 1906B, Tower 6, China Hong Kong City 33 Canton Road, Tsimshatsui, Kowloon Hong Kong TEL: +852-2377-0227 FAX: +852-2377-3921 Eudyna Devices Inc. 1000 Kamisukiahara, showa-cho Nakakomagun, Yamanashi 409-3883, Japan (Kokubo Industrial Park) TEL +81-55-275-4411 FAX +81-55-275-9461 Sales Division 1, Kanai-cho, Sakae-ku Yokohama, 244-0845, Japan TEL +81-45-853-8156 FAX +81-45-853-8170 CAUTION Eudyna Devices Inc. products contain gallium arsenide (GaAs) which can be hazardous to the human body and the environment. For safety, observe the following procedures: ・Do not put these products into the mouth. ・Do not alter the form of this product into a gas, powder, or liquid through burning, crushing, or chemical processing as these byproducts are dangerous to the human body if inhaled, ingested, or swallowed. ・Observe government laws and company regulations when discarding this product. This product must be discarded in accordance with methods specified by applicable hazardous waste procedures. Eudyna Devices Inc. reserves the right to change products and specifications without notice.The information does not convey any license under rights of Eudyna Devices Inc. or others. © 2006 Eudyna Devices Inc. 14