22CGQ045

PD-20346H 22CGQ045 JANS1N6660CCT1 JANTX1N6660CCT1 JANTXV1N6660CCT1 SCHOTTKY RECTIFIER 30 Amp. 45V HIGH EFFICIENCY SERIES Ref: MIL-PRF– 19500/608 Major Ratings and Characteristics   Characteristics  Description/Features 1N6660CCT1 Units  IF(AV) 30 A VRRM (Per Leg) 45 V IFSM @ tp = 8.3ms half–sine (Per Leg) 300 A VF @ 20Apk, TJ = 125°C (Per Leg) 0.70 V -65 to 150 °C TJ, Tstg Operating and storage The 1N6660CCT1 center tap Schottky rectifier has been expressly designed to meet the rigorous requirements of IR HiRel environments. It is packaged in the hermetic isolated TO-254AA package. The device's forward voltage drop and reverse leakage current are optimized for the lowest power loss and the highest circuit efficiency for typical high frequency switching power supplies and resonant power converters. Full MIL-PRF-19500 quality conformance testing is available on source control drawings to TX, TXV and S quality levels.     Hermetically Sealed Center Tap High Frequency Operation Guard Ring for Enhanced Ruggedness and Long term Reliability  Electrically Isolated  ESD Rating: Class 3A per MIL-STD-750, Method 1020 CASE STYLE 0.12 [.005] 13.84 [.545] 13.59 [.535] 3.78 [.149] 3.53 [.139] 6.60 [.260] 6.32 [.249] 1.27 [.050] 1.02 [.040] A 20.32 [.800] 20.07 [.790] 17.40 [.685] 16.89 [.665] 1 C 2 3 14.48 [.570] 12.95 [.510] 3X 3.81 [.150] 2X B 13.84 [.545] 13.59 [.535] 0.84 [.033] MAX. 1.14 [.045] 0.89 [.035] 0.36 [.014] 3.81 [.150] B A NOTES: 1. 2. 3. 4. DIMENSIONING & TOLERANCING PER ASME Y14.5M-1994. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS [INCHES]. CONTROLLING DIMENSION: INCH. CONFORMS TO JEDEC OUTLINE TO-254AA.   PIN ASSIGNMENTS 1 = DRAIN 2 = SOURCE 3 = GATE Case Outline and Dimensions - TO-254AA 1 2016-09-21 22CGQ045, 1N6660CCT1 Voltage Ratings   Part Number VR Max. DC Reverse Voltage (V) (Per Leg) 1N6660CCT1 45 VRRM Max. Working Peak Reverse Voltage (V) (Per Leg) Absolute Maximum Ratings Parameter IF(AV) Max. Average Forward Current See Fig. 5 IFSM Max. Peak One Cycle Non - Repetitive Surge Current (Per Leg) Limits Units Conditions 30 A 50% duty cycle @ TC = 118°C, rectangular waveform 300 A @ tp = 8.3 ms half-sine Electrical Specifications Parameter Limits Units Conditions 0.80 V  @ IF = 15A  TJ = -55°C  Max. Forward Voltage Drop (Per Leg) See Fig. 1  0.55 V  @ IF = 5.0A  0.75 V  @ IF = 15A  IRM Max. Reverse Leakage Current  (Per Leg) See Fig. 2   1.0 1.0 40 V  mA   mA   @ IF = 30A  TJ = 25°C  TJ = 125°C  CT Max. Junction Capacitance (Per Leg) 2000 pF  VR = 5VDC (1MHz, 25°C) LS Typical Series Inductance (Per Leg) 6.7 nH Measured from anode lead to cathode lead 6mm (0.25 in.) from package VFM TJ = 25°C  VR = rated VR  Thermal-Mechanical Specifications Parameter Limits Units Conditions TJ Max. Junction Temperature Range -65 to 125 °C   Tstg RthJC Max. Storage Temperature Range Max. Thermal Resistance, Junction to Case (Per Leg) Max. Thermal Resistance, Junction to Case (Per Package) Weight (Typical) -65 to 150 °C   1.65 °C/W  DC operation 0.85 °C/W  DC operation 9.3 g   Die Size (Typical) 150 x 150 mils   RthJC Wt Case Style See Fig. 4 TO-254AA   Pulse Width < 300µs, Duty Cycle < 2% 2 2016-09-21 22CGQ045, 1N6660CCT1 100 T = 150°C J 10 125°C 100°C 1 0.1 0.01 25°C 0.001 A 0.0001 0 10 20 30 40 50 Reverse Voltage - V R (V) Fig 2. Typical Values of Reverse Current Vs. Reverse Voltage (Per Leg) Fig 1. Max. Forward Voltage Drop Characteristics (Per Leg) 3 Fig 3. Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) 2016-09-21 22CGQ045, 1N6660CCT1 Thermal Response ( Z thJC ) 10 1 D = 0.4 D = 0.3 D = 0.5 D = 0.2 D = 0.1 SINGLE PULSE ( THERMAL RESPONSE ) Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.1 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig 4. Max. Thermal Impedance ZthJC Characteristics (Per Leg) Allowable Case Temperature - (°C) 160 R thJC (DC) = 0.85°C/W 140 120 DC 100 80 % Square Wave (D=0.50) Rated V R applied 80 60 40 20 0 0 5 10 15 20 25 30 35 40 Average Forward Current - I F(AV) (A) Fig 5. Max. Allowable Case Temperature Vs. Average Forward Current (Per Package) IR HiRel Headquarters: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA Tel: (310) 252-7105 IR HiRel Leominster: 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 IR HiRel San Jose: 2520 Junction Avenue, San Jose, California 95134, USA Tel: (408) 434-5000 Data and specifications subject to change without notice. 4 2016-09-21 22CGQ045, 1N6660CCT1 IMPORTANT NOTICE The information given in this document shall be in no event regarded as guarantee of conditions or characteristic. The data contained herein is a characterization of the component based on internal standards and is intended to demonstrate and provide guidance for typical part performance. It will require further evaluation, qualification and analysis to determine suitability in the application environment to confirm compliance to your system requirements. With respect to any example hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind including without limitation warranties on non- infringement of intellectual property rights and any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s product and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of any customer’s technical departments to evaluate the suitability of the product for the intended applications and the completeness of the product information given in this document with respect to applications. For further information on the product, technology, delivery terms and conditions and prices, please contact your local sales representative or go to (www.infineon.com/hirel). WARNING Due to technical requirements products may contain dangerous substances. For information on the types in question, please contact your nearest Infineon Technologies office. 5 2016-09-21