ModSTACK
Datasheet: 2B6I 500/800-330G M, S
Key Data
2 x 3 x 330A AC at 500V AC
Preliminary Data
General Information
Stack with IGBT, heatsinks, capacitors, drivers and sensors for several inverter applications. These are only technical data! Please read heedful the complete documentation and attend the adopted design environment! Especially the EMC environment and the controller functionality. Topology Load Type Cooling Targed Application Extra DC Link + 2B6I Unit 1 Unit 2 B6I Resistive, inductive load Forced air, Fan excluded = Solar Available in Master [M] ˜ ˜ or Slave [S] Configuration Scale Driver DRIVER Current-, Voltage-, DC LINK B6I Temperature-Monitoring n.a. = 6x FF600R12KL4C Electrical, opt. optical ˜ ˜ EN50178, UL94, prepared for UL508C SIGNAL CONDITIONER Master 24965 DRIVER & MONITOR Slave 24966 38000021_S5_MB
Drivercore Monitors Module (Unit1) Module (Unit2) Interface Standards
IGBT
=
Product ID (eupec) Drawing No. Circuit Diagram No.
57000002
INTERFACE
Electrical Data
Assumed Linevoltage DC Link Voltage DC Link Overvoltage Shutdown DC Link Current Voltage Unit1 Continious Current Unit1 Shorttime Current Unit1 Pulse Current Unit1 2B6I500-800-330G.doc
Parameter For IsolationManagement Within 100µs At IUnit2, VUnit2, cos_ϕUnit2 Min Typ Max
VLine VDC 275
500 675 VDCmax 900
VRMS Vav V Aav VRMS ARMS ARMS Apeak 2003-03-17
IDCLink
Input VUnit1 IUnit1
660
735 -
ϑ=ϑair_inlet
10s, every 180s, initial load = IUnit1 Sinehalfwave 20ms
IUnit1_10
1 of 11
ModSTACK
Datasheet: 2B6I 500/800-330G M, S
DC Current at Unit1
No rotating field, ϑ=ϑair_inlet, Percentage of IUnit1. Within 15µs
Preliminary Data
Aav % 500 -0,9 550 +0,9 660 Hz W VRMS ARMS
IUnit1_DC
Overcurrent Shutdown Unit1 Switching Freq. Unit1 Power Losses Unit1 V=Vunit1_min, I=IUnit1, fsw=fsw1 Depending on Voltage Unit2
Controller
fsw1 Ploss1 VUnit2
cos_ϕUnit2
Displacement factor Continious Current Unit2
ϑ=ϑair_inlet, ϑchip 5Hz
Both B6I connected in parallel (1U1 ->2U1..) ϑwater_inlet -25°C
ϑwater_
inlet
-
-
°C
vAir_PCB
Standard atmosphere No Condensation
2 900 0 0 1100 95 1000 10 20
m/s hPa % m m/s² m/s² 2003-03-17
pAir Rel. F
EN60068-2-6, Fc 10..59Hz 0,075mm Permanence Vibration EN60068-2-6, Fc 10-150Hz, 20 Cycles
2B6I500-800-330G.doc
4 of 11
ModSTACK
Datasheet: 2B6I 500/800-330G M, S
Shock Protection Degree Pollution Degree Overvoltage Category
EN60068-2-27, Ea Halfsine 11ms, 3 pulses
Preliminary Data
100 IP00 2 III m/s²
2B6I500-800-330G.doc
5 of 11
2003-03-17
ModSTACK
Datasheet: 2B6I 500/800-330G M, S
Derating Curves (IGBT Part)
Current derating at low rotating field frequency (f0). Maximal 100% current is allowed.
cos(phi) = 0.64, (motor) Theta_air = 40°C
120 100 80 60 40 20 0 -5 0 5 10 15 20 25 f0 [Hz] 30 35 40 45 50 55
Preliminary Data
2B6I500-800-330G.doc
I/I_nom [%]
6 of 11
2003-03-17
ModSTACK
Datasheet: 2B6I 500/800-330G M, S
cos(phi) = -0.64, (generator) Theta_air = 40°C
120 100 80 60 40 20 0 -5 0 5 10 15 20 25 f0 [Hz] 30 35 40 45 50 55
Preliminary Data
2B6I500-800-330G.doc
I/I_nom [%]
7 of 11
2003-03-17
ModSTACK
Datasheet: 2B6I 500/800-330G M, S Preliminary Data
Current derating at different switching frequencies. See datatable for nominal switching frequency. In this drawing 2500Hz ist assumed. Maximal 100% current is allowed. IGBT, cos(phi) = 0.64 Theta_air = 40°C
180 160 140 120 I/I_nom [%] 100 80 60 40 20 0 0 1000 2000 3000 4000 5000 6000 7000 fsw [Hz] FF 400 R12 KL4C FF 800 R17 KF6CB2 FF 1200 R17 KE3
Diode, cos(phi) = 0.64 Theta_air = 40°C
200 180 160 140 I/I_nom [%] 120 100 80 60 40 20 0 0 1000 2000 3000 4000 5000 6000 7000 fsw [Hz] FF 400 R12 KL4C FF 800 R17 KF6CB2 FF 1200 R17 KE3
2B6I500-800-330G.doc
8 of 11
2003-03-17
ModSTACK
Datasheet: 2B6I 500/800-330G M, S
IGBT, cos(phi) = - 0.64 Theta_air = 40°C
180 160 140 120 I/I_nom [%] 100 80 60 40 20 0 0 1000 2000 3000 4000 5000 6000 7000 fsw [Hz] FF 400 R12 KL4C FF 800 R17 KF6CB2 FF 1200 R17 KE3
Preliminary Data
Diode, cos(phi) = -0.64 Theta_air = 40°C
180 160 140 120 I/I_nom [%] 100 80 60 40 20 0 0 1000 2000 3000 4000 5000 6000 7000 fsw [Hz] FF 400 R12 KL4C FF 800 R17 KF6CB2 FF 1200 R17 KE3
2B6I500-800-330G.doc
9 of 11
2003-03-17
ModSTACK
Datasheet: 2B6I 500/800-330G M, S
Miscellaneous
This technical information specifies semiconductor stacks but promises no characteristics. It is valid in combination with the belonging technical notes. This document may be changed without prior notice.
Preliminary Data
Warning!
Prior to installation and commissioning all safety notices and warnings and all warning signs attached to the equipment have to be carefully read. Make sure that all warning signs remain in a legible condition and missing or damaged signs are replaced. The safety instructions have to be strictly adhered to. The manual contains detailed information on all technical topics with regard to the eupec ModSTACK. For further details regarding publications of the eupec ModSTACK and information on other publications in the area of ModSTACKs please contact your nearest eupec branch or visit our website: http://www.eupec.com. eupec GmbH 2003. All rights reserved Prepared by Approved by J.Schiele 2003-04-04 H.Nübel 2005-11-28 Date of publication Revision 3, 28.11.2005
2B6I500-800-330G.doc
10 of 11
2003-03-17
PowerSTACK 2B6I 500/800-330G M, S, Drawing, Preliminary Data
2B6I500-800-330G.doc
11 of 11
2003-03-17
很抱歉,暂时无法提供与“2B6I500-800-330GM”相匹配的价格&库存,您可以联系我们找货
免费人工找货