80CLQ150SCV

PD-94206D 80CLQ150 SCHOTTKY RECTIFIER HIGH EFFICIENCY SERIES 80 Amp, 150V Major Ratings and Characteristics Characteristics Description/Features 80CLQ150 Units 80 A VRRM (Per Leg) 150 V IFSM @ tp = 8.3ms half-sine (Per Leg) 400 A 0.84 V IF(AV) VF @ 40Apk, TJ =125°C (Per Leg) TJ, Tstg Operating and storage -55 to 150 °C The 80CLQ150 center tap Schottky rectifier has been expressly designed to meet the rigorous requirements of Hirel environments. It is packaged in the hermetic surface mount SMD-1 ceramic package. The device's forward voltage drop and reverse leakage current are optimized for the lowest power loss and the highest circuit efficiency for typical high frequency switching power supplies and resonent power converters. Full MIL-PRF-19500 quality conformance testing is available on source control drawings to TX, TXV and S quality levels. • • • • • Hermetically Sealed Center Tap Low Forward Voltage Drop High Frequency Operation Guard Ring for Enhanced Ruggedness and Long term Reliability • Surface Mount • Lightweight CASE STYLE ( ISOLATED BASE ) 2 1 3 ANODE COMMON ANODE CATHODE Case Outline and Dimensions - SMD-1 www.irf.com 1 02/18/14 80CLQ150 Voltage Ratings Part number VR 80CLQ150 Max. DC Reverse Voltage (V) (Per Leg) 150 VRWM Max. Working Peak Reverse Voltage (V) (Per Leg) Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current Limits Units Conditions 80 A 50% duty cycle @ TC = 87°C, square waveform 400 A @ tp = 8.3 ms half-sine See Fig. 5 IFSM Max. Peak One Cycle Non - Repetitive Surge Current (Per Leg) Electrical Specifications Parameters Limits Units Max. Forward Voltage Drop 1.28 V @ 40A (Per Leg) See Fig. 1  1.92 V @ 80A 0.96 V @ 40A 1.23 V @ 80A 0.84 V @ 40A 1.16 V @ 80A Max. Reverse Leakage Current 0.1 mA TJ = 25°C (Per Leg) See Fig. 2  16 mA TJ = 125°C CT Max. Junction Capacitance (Per Leg) 800 pF LS Typical Series Inductance (Per Leg) 5.9 nH VFM IRM Conditions TJ = -55°C TJ = 25°C TJ = 125°C VR = rated VR VR = 5VDC ( 1MHz, 25°C ) Measured from center of cathode pad to center of anode pad Thermal-Mechanical Specifications Parameters Limits Units Conditions TJ Max.Junction Temperature Range -55 to 150 Tstg Max. Storage Temperature Range -55 to 150 °C 1.25 °C/W DC operation 0.63 °C/W DC operation RthJC Max. Thermal Resistance, Junction °C See Fig. 4 to Case (Per Leg) RthJC Max. Thermal Resistance, Junction to Case (Per Package) wt Weight (Typical) Die Size (Typical) Case Style 2.6 158X158 g mils SMD-1  Pulse Width < 300µs, Duty Cycle < 2% 2 www.irf.com 80CLQ150 10 Instantaneous Forward Current - I F (A) Reverse Current - I R ( mA ) 100 125°C 1 100°C 0.1 75°C 0.01 0.001 25°C 0.0001 0 40 80 120 160 Reverse Voltage - VR (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage (Per Leg) 10 Tj = 125°C Tj = 25°C 1000 1 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 2.0 Forward Voltage Drop - V F (V) Fig. 1 - Max. Forward Voltage Drop Characteristics (Per Leg) Junction Capacitance - CT (pF) Tj = -55°C T J = 25°C 100 0 40 80 120 160 Reverse Voltage -VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage (Per Leg) www.irf.com 3 80CLQ150 Thermal Response (Z thJC ) 10 1 D = 0.50 0.20 0.10 0.1 0.01 0.00001 P DM 0.05 0.02 0.01 t1 t2 SINGLE PULSE (THERMAL RESPONSE) 0.0001 Notes: 1. Duty factor D = t 1 / t 2 2. Peak TJ = P DM x Z thJC + TC 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig. 4 - Max. Thermal Impedance ZthJC Characteristics (Per Leg) 180 80CLQ150 Allowable Case Temprature - (°C) 160 R thJC = 0.63°C/W 140 120 DC 100 80 60 40 20 0 0 20 40 60 80 100 120 Average Forward Current - I F(AV) (A) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current IR WORLD HEADQUARTERS: 101 N, Sepulveda Blvd, El Segundo, California 90245, USA Tel: (310) 252-7105 IR LEOMINSTER : 205 Crawford St., Leominster, Massachusetts 01453, USA Tel: (978) 534-5776 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. Data and specifications subject to change without notice. 02/2014 4 www.irf.com