AUIRF3205Z
AUIRF3205ZS
AUTOMOTIVE GRADE
Features
Advanced Process Technology
Ultra Low On-Resistance
175°C Operating Temperature
Fast Switching
Repetitive Avalanche Allowed up to Tjmax
Lead-Free, RoHS Compliant
Automotive Qualified *
HEXFET® Power MOSFET
55V
VDSS
RDS(on) max.
6.5m
ID (Silicon Limited)
110A
ID (Package Limited)
75A
D
Description
Specifically designed for Automotive applications, this HEXFET® Power
MOSFET utilizes the latest processing techniques to achieve extremely low
on-resistance per silicon area. Additional features of this design are a 175°C
junction operating temperature, fast switching speed and improved repetitive
avalanche rating . These features combine to make this design an extremely
efficient and reliable device for use in Automotive applications and a wide
variety of other applications.
Base part number
Package Type
AUIRF3205Z
TO-220
G
TO-220AB
AUIRF3205Z
D2Pak
AUIRF3205ZS
G
D
S
Gate
Drain
Source
Standard Pack
Form
Quantity
Tube
50
Tube
50
Tape and Reel Left
800
D2-Pak
AUIRF3205ZS
S
S
D
G
Orderable Part Number
AUIRF3205Z
AUIRF3205ZS
AUIRF3205ZSTRL
Absolute Maximum Ratings
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress
ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The thermal resistance
and power dissipation ratings are measured under board mounted and still air conditions. Ambient temperature (TA) is 25°C, unless
otherwise specified.
Symbol
Parameter
Max.
ID @ TC = 25°C
Continuous Drain Current, VGS @ 10V (Silicon Limited)
110
ID @ TC = 100°C
ID @ TC = 25°C
Continuous Drain Current, VGS @ 10V (Silicon Limited)
Continuous Drain Current, VGS @ 10V (Package Limited)
78
75
IDM
PD @TC = 25°C
Pulsed Drain Current
Maximum Power Dissipation
440
170
VGS
EAS
EAS (tested)
IAR
EAR
TJ
TSTG
Linear Derating Factor
Gate-to-Source Voltage
Single Pulse Avalanche Energy (Thermally Limited)
Single Pulse Avalanche Energy Tested Value
Avalanche Current
Repetitive Avalanche Energy
Operating Junction and
Storage Temperature Range
Soldering Temperature, for 10 seconds (1.6mm from case)
Mounting torque, 6-32 or M3 screw
Thermal Resistance
Symbol
RJC
RCS
RJA
RJA
Parameter
Junction-to-Case
Case-to-Sink, Flat, Greased Surface
Junction-to-Ambient
Junction-to-Ambient ( PCB Mount, steady state)
Units
A
W
1.1
± 20
180
250
See Fig.15,16, 12a, 12b
-55 to + 175
W/°C
V
mJ
A
mJ
°C
300
10 lbf•in (1.1N•m)
Typ.
Max.
Units
–––
0.50
–––
0.90
–––
62
40
°C/W
HEXFET® is a registered trademark of Infineon.
*Qualification standards can be found at www.infineon.com
1
2015-11-13
AUIRF3205Z/S
Static @ TJ = 25°C (unless otherwise specified)
V(BR)DSS
V(BR)DSS/TJ
RDS(on)
VGS(th)
gfs
Parameter
Drain-to-Source Breakdown Voltage
Breakdown Voltage Temp. Coefficient
Static Drain-to-Source On-Resistance
Gate Threshold Voltage
Forward Trans conductance
IDSS
Drain-to-Source Leakage Current
IGSS
Gate-to-Source Forward Leakage
Gate-to-Source Reverse Leakage
Min.
55
–––
–––
2.0
71
–––
–––
–––
–––
Typ.
–––
0.051
4.9
–––
–––
–––
–––
–––
–––
Max. Units
Conditions
–––
V VGS = 0V, ID = 250µA
––– V/°C Reference to 25°C, ID = 1mA
6.5 m VGS = 10V, ID = 66A
4.0
V VDS = VGS, ID = 250µA
–––
S VDS = 25V, ID = 66A
20
VDS = 55V, VGS = 0V
µA
250
VDS = 55V,VGS = 0V,TJ =125°C
200
VGS = 20V
nA
-200
VGS = -20V
Dynamic Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Qg
Qgs
Qgd
td(on)
tr
td(off)
tf
Total Gate Charge
Gate-to-Source Charge
Gate-to-Drain Charge
Turn-On Delay Time
Rise Time
Turn-Off Delay Time
Fall Time
–––
–––
–––
–––
–––
–––
–––
76
21
30
18
95
45
67
110
–––
–––
–––
–––
–––
–––
LD
Internal Drain Inductance
–––
4.5
–––
LS
Internal Source Inductance
–––
7.5
–––
Ciss
Coss
Input Capacitance
Output Capacitance
––– 3450 –––
––– 550 –––
Crss
Coss
Coss
Coss eff.
Reverse Transfer Capacitance
Output Capacitance
Output Capacitance
Effective Output Capacitance
––– 310 –––
––– 1940 –––
––– 430 –––
––– 640 –––
Diode Characteristics
Parameter
Continuous Source Current
IS
(Body Diode)
Pulsed Source Current
ISM
(Body Diode)
VSD
Diode Forward Voltage
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
ton
Forward Turn-On Time
ID = 66A
nC VDS = 44V
VGS = 10V
VDD = 28V
ID = 66A
ns
RG= 6.8
VGS = 10V
Between lead,
6mm (0.25in.)
nH
from package
and center of die contact
VGS = 0V
VDS = 25V
ƒ = 1.0MHz
pF
VGS = 0V, VDS = 1.0V ƒ = 1.0MHz
VGS = 0V, VDS = 44V ƒ = 1.0MHz
VGS = 0V, VDS = 0V to 44V
Min. Typ. Max. Units
–––
–––
75
–––
–––
440
–––
–––
–––
–––
28
25
1.3
42
38
Conditions
MOSFET symbol
showing the
A
integral reverse
p-n junction diode.
V TJ = 25°C,IS = 66A,VGS = 0V
ns TJ = 25°C ,IF = 66A , VDD = 25V
nC di/dt = 100A/µs
Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD)
Notes:
Repetitive rating; pulse width limited by max. junction temperature. (See fig.11)
Limited by TJmax, starting TJ = 25°C, L = 0.08mH, RG = 25, IAS = 66A, VGS =10V. Part not recommended for use above this value.
Pulse width 1.0ms; duty cycle 2%.
Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS.
Limited by TJmax , see Fig.12a, 12b, 15, 16 for typical repetitive avalanche performance.
This value determined from sample failure population, starting TJ = 25°C, L = 0.08mH, RG = 25, IAS = 66A, VGS =10V.
This is only applied to TO-220AB package.
This is applied to D2 Pak, When mounted on 1" square PCB (FR-4 or G-10 Material). For recommended footprint and soldering
techniques refer to application note #AN-994
R is measured at TJ of approximately 90°C
2
2015-11-13
AUIRF3205Z/S
1000
VGS
TOP
15V
10V
8.0V
7.0V
6.0V
5.5V
5.0V
BOTTOM 4.5V
100
10
4.5V
1
0.1
VGS
15V
10V
8.0V
7.0V
6.0V
5.5V
5.0V
BOTTOM 4.5V
TOP
ID, Drain-to-Source Current (A)
ID, Drain-to-Source Current (A)
1000
4.5V
20µs PULSE WIDTH
Tj = 25°C
1
10
100
10
100
0.1
VDS , Drain-to-Source Voltage (V)
20µs PULSE WIDTH
Tj = 175°C
1
10
100
VDS , Drain-to-Source Voltage (V)
Fig. 2 Typical Output Characteristics
Fig. 1 Typical Output Characteristics
120
T J = 175°C
T J = 25°C
T J = 175°C
100
10
VDS = 25V
20µs PULSE WIDTH
1
4.0
5.0
6.0
7.0
8.0
9.0
10.0
VGS, Gate-to-Source Voltage (V)
Fig. 3 Typical Transfer Characteristics
3
Gfs, Forward Transconductance (S)
ID , Drain-to-Source Current A)
1000
100
80
T J = 25°C
60
40
20
VDS = 10V
20µs PULSE WIDTH
0
0
11.0
20
40
60
80
100
ID, Drain-to-Source Current (A)
Fig. 4 Typical Forward Trans conductance
vs. Drain Current
2015-11-13
AUIRF3205Z/S
6000
20
5000
VGS, Gate-to-Source Voltage (V)
VGS = 0V,
f = 1 MHZ
Ciss = C gs + Cgd, C ds SHORTED
Crss = C gd
C, Capacitance (pF)
Coss = Cds + Cgd
4000
Ciss
3000
2000
1000
Coss
Crss
10
VDS = 44V
VDS= 28V
VDS= 11V
16
12
8
4
0
1
ID= 66A
0
100
0
20
VDS, Drain-to-Source Voltage (V)
Fig 5. Typical Capacitance vs. Drain-to-Source Voltage
ID, Drain-to-Source Current (A)
ISD, Reverse Drain Current (A)
80
100
120
OPERATION IN THIS AREA
LIMITED BY R DS (on)
1000
T J = 175°C
100.0
60
Fig 6. Typical Gate Charge vs. Gate-to-Source Voltage
10000
1000.0
100
10.0
T J = 25°C
1.0
VGS = 0V
0.1
0.2
0.6
1.0
1.4
1.8
VSD , Source-toDrain Voltage (V)
Fig. 7 Typical Source-to-Drain Diode
Forward Voltage
4
40
QG Total Gate Charge (nC)
100µsec
10
1
0.1
2.2
1msec
Tc = 25°C
Tj = 175°C
Single Pulse
1
10msec
10
100
1000
VDS , Drain-toSource Voltage (V)
Fig 8. Maximum Safe Operating Area
2015-11-13
AUIRF3205Z/S
120
R DS(on) , Drain-to-Source On Resistance
(Normalized)
2.5
LIMITED BY PACKAGE
ID , Drain Current (A)
100
80
60
40
20
0
ID = 66A
VGS = 10V
2.0
1.5
1.0
0.5
25
50
75
100
125
150
175
-60 -40 -20
T C , Case Temperature (°C)
0
20 40 60 80 100 120 140 160 180
T J , Junction Temperature (°C)
Fig 9. Maximum Drain Current vs.
Case Temperature
Fig 10. Normalized On-Resistance
vs. Temperature
1
Thermal Response ( Z thJC )
D = 0.50
0.20
0.1
0.10
0.05
0.02
0.01
0.01
SINGLE PULSE
( THERMAL RESPONSE )
Notes:
1. Duty Factor D = t1/t2
2. Peak Tj = P dm x Zthjc + Tc
0.001
1E-006
1E-005
0.0001
0.001
0.01
0.1
t1 , Rectangular Pulse Duration (sec)
Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case
5
2015-11-13
AUIRF3205Z/S
15V
DRIVER
L
VDS
D.U.T
RG
+
V
- DD
IAS
20V
tp
A
0.01
Fig 12a. Unclamped Inductive Test Circuit
V(BR)DSS
tp
EAS, Single Pulse Avalanche Energy (mJ)
350
ID
TOP
300
BOTTOM
27A
47A
66A
250
200
150
100
50
0
25
50
75
100
125
150
175
Starting T J, Junction Temperature (°C)
I AS
Fig 12b. Unclamped Inductive Waveforms
Fig 12c. Maximum Avalanche Energy vs. Drain Current
Fig 13a. Gate Charge Test Circuit
Id
Vds
Vgs
Vgs(th)
VGS(th) Gate threshold Voltage (V)
4.0
ID = 250µA
3.0
2.0
1.0
-75
-50 -25
0
25
50
75
100 125 150 175
T J , Temperature ( °C )
Qgs1 Qgs2
Qgd
Qgodr
Fig 14. Threshold Voltage vs. Temperature
Fig 13b. Gate Charge Waveform
6
2015-11-13
AUIRF3205Z/S
1000
Avalanche Current (A)
Duty Cycle = Single Pulse
100
Allowed avalanche Current vs
avalanche pulsewidth, tav
assuming Tj = 25°C due to
avalanche losses. Note: In no
case should Tj be allowed to
exceed Tjmax
0.01
0.05
10
0.10
1
0.1
1.0E-08
1.0E-07
1.0E-06
1.0E-05
1.0E-04
1.0E-03
1.0E-02
1.0E-01
tav (sec)
Fig 15. Avalanche Current vs. Pulse width
Notes on Repetitive Avalanche Curves , Figures 15, 16:
(For further info, see AN-1005 at www.infineon.com)
1. Avalanche failures assumption:
Purely a thermal phenomenon and failure occurs at a temperature far in
excess of Tjmax. This is validated for every part type.
2. Safe operation in Avalanche is allowed as long as Tjmax is not exceeded.
3. Equation below based on circuit and waveforms shown in Figures 12a, 12b.
4. PD (ave) = Average power dissipation per single avalanche pulse.
5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase
during avalanche).
6. Iav = Allowable avalanche current.
7. T = Allowable rise in junction temperature, not to exceed Tjmax (assumed as
25°C in Figure 14, 15).
tav = Average time in avalanche.
D = Duty cycle in avalanche = tav ·f
ZthJC(D, tav) = Transient thermal resistance, see Figures 13)
EAR , Avalanche Energy (mJ)
200
TOP
Single Pulse
BOTTOM 10% Duty Cycle
ID = 66A
160
120
80
40
PD (ave) = 1/2 ( 1.3·BV·Iav) = T/ ZthJC
0
25
50
75
100
125
150
175
Starting T J , Junction Temperature (°C)
Iav = 2T/ [1.3·BV·Zth]
EAS (AR) = PD (ave)·tav
Fig 16. Maximum Avalanche Energy vs. Temperature
7
2015-11-13
AUIRF3205Z/S
Fig 17. Peak Diode Recovery dv/dt Test Circuit for N-Channel HEXFET® Power MOSFETs
Fig 18a. Switching Time Test Circuit
Fig 18b. Switching Time Waveforms
8
2015-11-13
AUIRF3205Z/S
TO-220AB Package Outline (Dimensions are shown in millimeters (inches))
TO-220AB Part Marking Information
Part Number
AUIRF3205Z
YWWA
IR Logo
XX
Date Code
Y= Year
WW= Work Week
XX
Lot Code
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
9
2015-11-13
AUIRF3205Z/S
D2Pak (TO-263AB) Package Outline (Dimensions are shown in millimeters (inches))
D2Pak (TO-263AB) Part Marking Information
Part Number
AUIRF3205ZS
YWWA
IR Logo
XX
Date Code
Y= Year
WW= Work Week
XX
Lot Code
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
10
2015-11-13
AUIRF3205Z/S
D2Pak (TO-263AB) Tape & Reel Information (Dimensions are shown in millimeters (inches))
TRR
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
FEED DIRECTION 1.85 (.073)
1.65 (.065)
1.60 (.063)
1.50 (.059)
11.60 (.457)
11.40 (.449)
0.368 (.0145)
0.342 (.0135)
15.42 (.609)
15.22 (.601)
24.30 (.957)
23.90 (.941)
TRL
10.90 (.429)
10.70 (.421)
1.75 (.069)
1.25 (.049)
4.72 (.136)
4.52 (.178)
16.10 (.634)
15.90 (.626)
FEED DIRECTION
13.50 (.532)
12.80 (.504)
27.40 (1.079)
23.90 (.941)
4
330.00
(14.173)
MAX.
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
60.00 (2.362)
MIN.
26.40 (1.039)
24.40 (.961)
3
30.40 (1.197)
MAX.
4
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
11
2015-11-13
AUIRF3205Z/S
Qualification Information
Automotive
(per AEC-Q101)
Comments: This part number(s) passed Automotive qualification. Infineon’s
Industrial and Consumer qualification level is granted by extension of the higher
Automotive level.
Qualification Level
Moisture Sensitivity Level
TO-220 Pak
N/A
D2-Pak
MSL1
Machine Model
Human Body Model
ESD
Charged Device Model
RoHS Compliant
Class M4 (+/- 425V)†
AEC-Q101-002
Class H1C (+/- 2000V)†
AEC-Q101-001
Class C5 (+/- 1125V)†
AEC-Q101-005
Yes
† Highest passing voltage.
Revision History
Date
11/13/2015
Comments
Updated datasheet with corporate template
Corrected ordering table on page 1.
Published by
Infineon Technologies AG
81726 München, Germany
© Infineon Technologies AG 2015
All Rights Reserved.
IMPORTANT NOTICE
The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics
(“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any
information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and
liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third
party.
In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this
document and any applicable legal requirements, norms and standards concerning customer’s products and any use of
the product of Infineon Technologies in customer’s applications.
The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of
customer’s technical departments to evaluate the suitability of the product for the intended application and the
completeness of the product information given in this document with respect to such application.
For further information on the product, technology, delivery terms and conditions and prices please contact your nearest
Infineon Technologies office (www.infineon.com).
WARNINGS
Due to technical requirements products may contain dangerous substances. For information on the types in question
please contact your nearest Infineon Technologies office.
Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized
representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a
failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.
12
2015-11-13
