AUIRF7739L2

  AUIRF7739L2TR AUTOMOTIVE GRADE   Advanced Process Technology Optimized for Automotive Motor Drive, DC-DC and other Heavy Load Applications Exceptionally Small Footprint and Low Profile High Power Density Low Parasitic Parameters Dual Sided Cooling 175°C Operating Temperature Repetitive Avalanche Capability for Robustness and Reliability Lead free, RoHS and Halogen free Automotive Qualified *         Automotive DirectFET® Power MOSFET  V(BR)DSS RDS(on) typ. max. ID (Silicon Limited) Qg (typical)     D G SC M2 S S S S S S S S D DirectFET® ISOMETRIC L8 Applicable DirectFET® Outline and Substrate Outline  SB 40V 700µ 1000µ 270A 220nC M4 L4 L6 L8 Description The AUIRF7739L2TR combines the latest Automotive HEXFET® Power MOSFET Silicon technology with the advanced DirectFET® packaging to achieve the lowest on-state resistance in a package that has the footprint of a DPak (TO-252AA) and only 0.7 mm profile. The DirectFET package is compatible with existing layout geometries used in power applications, PCB assembly equipment and vapor phase, infra-red or convection soldering techniques, when application note AN-1035 is followed regarding the manufacturing methods and processes. The DirectFET package allows dual sided cooling to maximize thermal transfer in automotive power systems. This HEXFET® Power MOSFET is designed for applications where efficiency and power density are essential. The advanced DirectFET® packaging platform coupled with the latest silicon technology allows the AUIRF7739L2TR to offer substantial system level savings and performance improvement specifically in motor drive, high frequency DC-DC and other heavy load applications on ICE, HEV and EV platforms. This MOSFET utilizes the latest processing techniques to achieve low on-resistance and low Qg per silicon area. Additional features of this MOSFET are 175°C operating junction temperature and high repetitive peak current capability. These features combine to make this MOSFET a highly efficient, robust and reliable device for high current automotive applications. Base Part Number   AUIRF7739L2 Package Type   DirectFET Large Can Standard Pack Form Quantity Tape and Reel 4000 Orderable Part Number   AUIRF7739L2TR Absolute Maximum Ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied. Exposure to absolutemaximum-rated conditions for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Ambient temperature (TA) is 25°C, unless otherwise specified. VDS VGS ID @ TC = 25°C ID @ TC = 100°C ID @ TA = 25°C ID @ TC = 25°C IDM PD @TC = 25°C PD @TA = 25°C EAS EAS (tested) IAR EAR TP TJ TSTG Parameter Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current, VGS @ 10V (Silicon Limited)  Continuous Drain Current, VGS @ 10V (Silicon Limited)  Continuous Drain Current, VGS @ 10V (Silicon Limited)  Continuous Drain Current, VGS @ 10V (Package Limited) Pulsed Drain Current  Power Dissipation  Power Dissipation  Single Pulse Avalanche Energy (Thermally Limited)  Single Pulse Avalanche Energy (Tested Value)  Avalanche Current  Repetitive Avalanche Energy  Peak Soldering Temperature Operating Junction and Storage Temperature Range Max. 40 ±20 270 190 46 375 1070 125 3.8 270 160 See Fig. 16, 17, 18a, 18b 270 -55 to + 175 Units V A W mJ A mJ °C   HEXFET® is a registered trademark of Infineon. *Qualification standards can be found at www.infineon.com 1 2015-11-19 AUIRF7739L2TR   Thermal Resistance Symbol Parameter Junction-to-Ambient  RJA Junction-to-Ambient  RJA Junction-to-Ambient  RJA Junction-to-Can  RJ-Can RJ-PCB Typ. ––– 12.5 20 ––– Junction-to-PCB Mounted Linear Derating Factor  ––– Output Capacitance Effective Output Capacitance Units °C/W   0.5 0.83 Static Electrical Characteristics @ TJ = 25°C (unless otherwise specified)   Symbol Parameter Min. Typ. Max. Units V(BR)DSS Drain-to-Source Breakdown Voltage 40 ––– ––– V ––– 0.008 ––– V/°C V(BR)DSS/TJ Breakdown Voltage Temp. Coefficient ––– 700 1000 Static Drain-to-Source On-Resistance RDS(on) µ VGS(th) Gate Threshold Voltage 2.0 2.8 4.0 V Gate Threshold Voltage Coefficient ––– -6.7 ––– mV/°C VGS(th)/TJ gfs Forward Transconductance 280 ––– ––– S RG Internal Gate Resistance ––– 1.5 –––  ––– ––– 5.0 Drain-to-Source Leakage Current µA IDSS ––– ––– 250 IGSS Gate-to-Source Forward Leakage ––– ––– 100 nA Gate-to-Source Reverse Leakage ––– ––– -100 Dynamic Electrical Characteristics @ TJ = 25°C (unless otherwise specified)   Symbol Parameter Min. Typ. Max. Units Qg Total Gate Charge ––– 220 330 Qgs1 Gate-to-Source Charge ––– 46 ––– Qgs2 Gate-to-Source Charge ––– 19 ––– nC   Qgd Gate-to-Drain ("Miller") Charge ––– 81 Qgodr Gate Charge Overdrive ––– 74 ––– Qsw Switch Charge (Qgs2 + Qgd) ––– 100 ––– Qoss Output Charge ––– 83 ––– nC td(on) Turn-On Delay Time ––– 21 ––– tr Rise Time ––– 71 ––– ns td(off) Turn-Off Delay Time ––– 56 ––– tf Fall Time ––– 42 ––– Ciss Input Capacitance ––– 11880 ––– Coss Output Capacitance ––– 2510 ––– Crss Reverse Transfer Capacitance ––– 1240 ––– pF Coss Output Capacitance ––– 8610 ––– Coss Coss eff. Max. 40 ––– ––– 1.2 ––– ––– 2230 3040 ––– ––– W/°C Conditions VGS = 0V, ID = 250µA Reference to 25°C, ID = 1.0mA VGS = 10V, ID = 160A  VDS = VGS, ID = 250µA VDS = 10V, ID = 160A VDS = 40V, VGS = 0V VDS = 40V, VGS = 0V, TJ = 125°C VGS = 20V VGS = -20V Conditions VDS = 20V VGS = 10V ID = 160A See Fig.11 VDS = 16V, VGS = 0V VDD = 20V, VGS = 10V  ID = 160A RG = 1.8 VGS = 0V VDS = 25V ƒ = 1.0 MHz VGS = 0V, VDS = 1.0V, ƒ = 1.0 MHz VGS = 0V, VDS = 32V, ƒ = 1.0 MHz VGS = 0V, VDS = 0V to 32V Notes  through  are on page 3 2 2015-11-19 AUIRF7739L2TR   Diode Characteristics Symbol Parameter Continuous Source Current IS (Body Diode) Pulsed Source Current ISM (Body Diode)  Diode Forward Voltage VSD trr   Reverse Recovery Time Qrr Reverse Recovery Charge  Surface mounted on 1 in. square Cu board (still air).               Min. Typ. ––– ––– ––– ––– ––– ––– ––– ––– 87 250     Max. Units Conditions MOSFET symbol 110 showing the A integral reverse 1070 p-n junction diode. 1.3 V TJ = 25°C, IS = 160A, VGS = 0V  130 ns TJ = 25°C, IF = 160A, VDD = 20V 380 nC dv/dt = 100A/µs  D G  Mounted to a PCB with small clip heatsink (still air) S  Mounted on minimum footprint full size board with metalized back and with small clip heatsink (still air). Click on this section to link to the appropriate technical paper. Click on this section to link to the DirectFET® Website. Surface mounted on 1 in. square Cu board, steady state. TC measured with thermocouple mounted to top (Drain) of part. Repetitive rating; pulse width limited by max. junction temperature. Starting TJ = 25°C, L = 0.021mH, RG = 25, IAS = 160A. Pulse width  400µs; duty cycle  2%. Used double sided cooling, mounting pad with large heatsink. Mounted on minimum footprint full size board with metalized back and with small clip heat sink. R is measured at TJ of approximately 90°C. 3 2015-11-19 AUIRF7739L2TR   1000 1000 100 BOTTOM TOP 10 ID, Drain-to-Source Current (A) ID, Drain-to-Source Current (A) TOP VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V 4.5V BOTTOM 100 60µs PULSE WIDTH 1 Tj = 25°C 60µs PULSE WIDTH Tj = 175°C 4.5V 4.5V 0.1 10 0.1 1 10 100 1000 0.1 V DS, Drain-to-Source Voltage (V) 8 6 4 T J = 125°C T J = 25°C 5.0 5.5 6.0 6.5 7.0 7.5 8.0 RDS (on) , Drain-to-Source On Resistance (m ) RDS(on) , Drain-to -Source On Resistance ( m) ID = 160A 0 0.93 100 1000 VGS = 10V 0.92 0.91 0.90 0.89 0.88 0.87 0.86 0.85 0 40 80 120 160 200 ID , Drain Current (A) VGS, Gate -to -Source Voltage (V) Fig. 3 Typical On-Resistance vs. Gate Voltage Fig. 4 Typical On-Resistance vs. Drain Current 1000 2.0 R DS(on) , Drain-to-Source On Resistance (Normalized) ID, Drain-to-Source Current (A) 10 Fig. 2 Typical Output Characteristics 10 2 1 V DS, Drain-to-Source Voltage (V) Fig. 1 Typical Output Characteristics 100 T J = 175°C T J = 25°C 10 1 VDS = 25V 60µs PULSE WIDTH 0.1 2 3 4 5 6 7 8 VGS, Gate-to-Source Voltage (V) Fig 5. 4 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V 4.5V Typical Transfer Characteristics ID = 160A VGS = 10V 1.5 1.0 0.5 -60 -40 -20 0 20 40 60 80 100 120 140160 180 T J , Junction Temperature (°C) Fig 6. Normalized On-Resistance vs. Temperature 2015-11-19 AUIRF7739L2TR   1000 4.5 ISD, Reverse Drain Current (A) VGS(th) , Gate threshold Voltage (V) 5.0 4.0 3.5 3.0 2.5 ID = 250µA ID = 1.0mA 2.0 ID = 1.0A 1.5 T J = 175°C 100 T J = 25°C 10 VGS = 0V 1.0 1.0 -75 -50 -25 0 0.0 25 50 75 100 125 150 175 200 100000 2.0 2.5 3.0 Coss = Cds + Cgd 100 T J = 175°C 50 C iss 10000 C oss C rss V DS = 10V 25 1.5 VGS = 0V, f = 1 MHZ Ciss = C gs + Cgd, C ds SHORTED Crss = C gd T J = 25°C C, Capacitance (pF) Gfs, Forward Transconductance (S) 150 75 1.0 Fig 8. Typical Source-Drain Diode Forward Voltage Fig. 7 Typical Threshold Voltage vs. Junction Temperature 125 0.5 VSD , Source-to-Drain Voltage (V) T J , Temperature ( °C ) 20µs PULSE WIDTH 0 1000 0 25 50 75 100 125 150 1 10 100 ID ,Drain-to-Source Current (A) VDS , Drain-to-Source Voltage (V) Fig 9. Typical Forward Trans conductance vs. Drain Current Fig 10. Typical Capacitance vs. Drain-to-Source Voltage 300 14.0 12.0 250 VDS = 32V VDS = 20V 10.0 ID, Drain Current (A) VGS, Gate-to-Source Voltage (V) ID = 160A 8.0 6.0 4.0 150 100 50 2.0 0 0.0 0 50 100 150 200 250 QG, Total Gate Charge (nC) Fig 11. Typical Gate Charge vs. Gate-to-Source Voltage   5 200 300 25 50 75 100 125 150 175 T C , Case Temperature (°C) Fig 12. Maximum Drain Current vs. Case Temperature 2015-11-19 AUIRF7739L2TR   1100 EAS , Single Pulse Avalanche Energy (mJ) ID, Drain-to-Source Current (A) 10000 1000 100µsec 100 1msec DC ID 29A 46A BOTTOM 160A 1000 OPERATION IN THIS AREA LIMITED BY R DS (on) 10msec 10 Tc = 25°C Tj = 175°C Single Pulse TOP 900 800 700 600 500 400 300 200 100 1 0 0 1 10 100 25 VDS , Drain-to-Source Voltage (V) 50 75 100 125 150 175 Starting T J , Junction Temperature (°C) Fig 14. Maximum Avalanche Energy vs. Temperature Fig 13. Maximum Safe Operating Area Thermal Response ( Z thJC ) °C/W 10 1 D = 0.50 0.20 0.10 0.05 0.1 0.02 0.01 0.01 J R1 R1 J 1 R2 R2 R3 R3 R4 R4 C 2 1 2 3 3 4 SINGLE PULSE ( THERMAL RESPONSE ) 0.0001 1E-006 1E-005 i (sec) 0.000171 0.6140 0.053914 0.4520 0.006099 1.47e-05 0.036168 4 Ci= iRi Ci= iRi 0.001 C Ri (°C/W) 0.1080 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.0001 0.001 0.01 0.1 1 t1 , Rectangular Pulse Duration (sec) Fig 15. Maximum Effective Transient Thermal Impedance, Junction-to-Case 1000 Avalanche Current (A) Duty Cycle = Single Pulse 100 10 Allowed avalanche Current vs avalanche pulsewidth, tav, assumingTj = 150°C and Tstart =25°C (Single Pulse) 0.01 0.05 0.10 1 Allowed avalanche Current vs avalanche pulsewidth, tav, assumingj = 25°C and Tstart = 150°C. 0.1 1.0E-06 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 tav (sec) Fig 16. Typical Avalanche Current vs. Pulse Width 6 2015-11-19 AUIRF7739L2TR   EAR , Avalanche Energy (mJ) 300 TOP Single Pulse BOTTOM 1.0% Duty Cy cle ID = 160A 250 200 150 100 50 0 25 50 75 100 125 150 175 Notes on Repetitive Avalanche Curves , Figures 16, 17: (For further info, see AN-1005 at www.infineon.com) 1. Avalanche failures assumption: Purely a thermal phenomenon and failure occurs at a temperature far in excess of Tjmax. This is validated for every part type. 2. Safe operation in Avalanche is allowed as long as Tjmax is not exceeded. 3. Equation below based on circuit and waveforms shown in Figures 18a, 18b. 4. PD (ave) = Average power dissipation per single avalanche pulse. 5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase during avalanche). 6. Iav = Allowable avalanche current. 7. T = Allowable rise in junction temperature, not to exceed Tjmax (assumed as 25°C in Figure 16, 17). tav = Average time in avalanche. D = Duty cycle in avalanche = tav ·f ZthJC(D, tav) = Transient thermal resistance, see Figures 15) Starting TJ , Junction Temperature (°C) Fig 17. Maximum Avalanche Energy vs. Temperature Fig 18a. Unclamped Inductive Test Circuit PD (ave) = 1/2 ( 1.3·BV·Iav) = T/ ZthJC Iav = 2T/ [1.3·BV·Zth] EAS (AR) = PD (ave)·tav Fig 18b. Unclamped Inductive Waveforms VDD  Fig 19a. Gate Charge Test Circuit Fig 20a. Switching Time Test Circuit 7 Fig 19b. Gate Charge Waveform Fig 20b. Switching Time Waveforms 2015-11-19 AUIRF7739L2TR   DirectFET® Board Footprint, L8 (Large Size Can). Please see DirectFET® application note AN-1035 for all details regarding the assembly of DirectFET® . This includes all recommendations for stencil and substrate designs. G = GATE D = DRAIN S = SOURCE D D D D S S S S D G S S S S D Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 8 2015-11-19 AUIRF7739L2TR   DirectFET® Outline Dimension, L8 (Large Size Can). Please see DirectFET® application note AN-1035 for all details regarding the assembly of DirectFET® . This includes all recommendations for stencil and substrate designs. DirectFET® Part Marking Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 9 2015-11-19 AUIRF7739L2TR   DirectFET® Tape & Reel Dimension (Showing component orientation) NOTE: Controlling dimensions in mm Std reel quantity is 4000 parts, ordered as AUIRF7739L2TR. REEL DIMENSIONS STANDARD OPTION (QTY 4000) IMPERIAL METRIC MIN CODE MAX MIN MAX 12.992 A N.C 330.00 N.C 0.795 B N.C 20.20 N.C 0.504 C 12.80 0.520 13.20 0.059 D 1.50 N.C N.C 3.900 E 99.00 100.00 3.940 F N.C N.C 0.880 22.40 G 0.650 16.40 0.720 18.40 H 0.630 15.90 0.760 19.40 Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 10 2015-11-19 AUIRF7739L2TR   Qualification Information Qualification Level Moisture Sensitivity Level Machine Model Human Body Model   ESD Charged Device Model RoHS Compliant Automotive (per AEC-Q101) Comments: This part number(s) passed Automotive qualification. Infineon’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. DFET2 Large Can MSL1 Class M4 (800V)† AEC-Q101-002 Class H3A (7000V)† AEC-Q101-001 N/A AEC-Q101-005 Yes † Highest passing voltage. Revision History Date 11/19/2015 Comments    Updated datasheet with corporate template Corrected ordering table on page 1. Updated Tape and Reel option on page 10 Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2015 All Rights Reserved. IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.   11 2015-11-19