AUIRFR2905ZTR

AUTOMOTIVE GRADE AUIRFR2905Z   Features  Advanced Process Technology  Ultra Low On-Resistance  175°C Operating Temperature  Fast Switching  Repetitive Avalanche Allowed up to Tjmax  Lead-Free, RoHS Compliant  Automotive Qualified * D-Pak typ. 11.1m max. 14.5m ID (Silicon Limited) 59A ID (Package Limited) 42A D G S D-Pak AUIRFR2905Z G Gate D Drain Standard Pack Form Quantity Tube 75 Tape and Reel Left 3000 Package Type AUIRFR2905Z 55V RDS(on) Description Specifically designed for Automotive applications, this HEXFET® Power MOSFET utilizes the latest processing techniques to achieve extremely low on-resistance per silicon area. Additional features of this design are a 175°C junction operating temperature, fast switching speed and improved repetitive avalanche rating . These features combine to make this design an extremely efficient and reliable device for use in Automotive applications and a wide variety of other applications. Base part number VDSS   S Source Orderable Part Number AUIRFR2905Z AUIRFR2905ZTRL Absolute Maximum Ratings Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only; and functional operation of the device at these or any other condition beyond those indicated in the specifications is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Ambient temperature (TA) is 25°C, unless otherwise specified. Symbol Parameter Max. ID @ TC = 25°C Continuous Drain Current, VGS @ 10V (Silicon Limited) 59 ID @ TC = 100°C Continuous Drain Current, VGS @ 10V (Silicon Limited) 42 ID @ TC = 25°C IDM PD @TC = 25°C Continuous Drain Current, VGS @ 10V (Package Limited) Pulsed Drain Current  Maximum Power Dissipation 42 240 110 VGS EAS EAS (Tested) IAR EAR TJ TSTG Linear Derating Factor Gate-to-Source Voltage Single Pulse Avalanche Energy (Thermally Limited)  Single Pulse Avalanche Energy Tested Value  Avalanche Current  Repetitive Avalanche Energy  Operating Junction and Storage Temperature Range Soldering Temperature, for 10 seconds (1.6mm from case) Thermal Resistance   Symbol RJC RJA RJA Parameter Junction-to-Case  Junction-to-Ambient ( PCB Mount)  Junction-to-Ambient Units A W 0.72 ± 20 55 82 See Fig.15,16, 12a, 12b W/°C V mJ A mJ -55 to + 175   300   °C  Typ. Max. Units ––– ––– ––– 1.38 50 110 °C/W HEXFET® is a registered trademark of Infineon. *Qualification standards can be found at www.infineon.com 1 2015-10-12 AUIRFR2905Z   Static @ TJ = 25°C (unless otherwise specified) V(BR)DSS V(BR)DSS/TJ RDS(on) VGS(th) gfs RG Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Trans conductance Gate Input Resistance IDSS Drain-to-Source Leakage Current IGSS Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Min. Typ. Max. Units Conditions 55 ––– ––– V VGS = 0V, ID = 250µA ––– 0.053 ––– V/°C Reference to 25°C, ID = 1mA ––– 11.1 14.5 m VGS = 10V, ID = 36A  2.0 ––– 4.0 V VDS = VGS, ID = 250µA 20 ––– ––– S VDS = 25V, ID = 36A ––– 1.3 –––  ƒ = 1.0MHz , open drain ––– ––– 20 VDS = 55 V, VGS = 0V µA ––– ––– 250 VDS = 55V,VGS = 0V,TJ =125°C ––– ––– 200 VGS = 20V nA ––– ––– -200 VGS = -20V Dynamic Electrical Characteristics @ TJ = 25°C (unless otherwise specified) Qg Qgs Qgd td(on) tr td(off) tf Total Gate Charge Gate-to-Source Charge Gate-to-Drain Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time ––– ––– ––– ––– ––– ––– ––– 29 7.7 12 14 66 31 35 44 ––– ––– ––– ––– ––– ––– LD Internal Drain Inductance ––– 4.5 ––– LS Internal Source Inductance ––– 7.5 ––– ––– ––– ––– ––– ––– ––– 1380 240 120 820 190 300 ––– ––– ––– ––– ––– ––– Min. Typ. Max. Units ––– ––– 42 ––– ––– 240 ––– ––– ––– ––– 23 16 1.3 35 24 Ciss Input Capacitance Coss Output Capacitance Crss Reverse Transfer Capacitance Output Capacitance Coss Coss Output Capacitance Effective Output Capacitance Coss eff. Diode Characteristics   Parameter Continuous Source Current IS (Body Diode) Pulsed Source Current ISM (Body Diode) VSD Diode Forward Voltage trr Reverse Recovery Time Qrr Reverse Recovery Charge ton Forward Turn-On Time ID = 36A nC   VDS = 44V VGS = 10V VDD = 28V ID = 36A ns RG = 15 VGS = 10V Between lead, 6mm (0.25in.) nH   from package and center of die contact VGS = 0V VDS = 25V ƒ = 1.0MHz pF   VGS = 0V, VDS = 1.0V ƒ = 1.0MHz VGS = 0V, VDS = 44V ƒ = 1.0MHz VGS = 0V, VDS = 0V to 44V  Conditions MOSFET symbol showing the A integral reverse p-n junction diode. V TJ = 25°C,IS = 36A,VGS = 0V  ns TJ = 25°C ,IF = 36A, VDD = 28V nC di/dt = 100A/µs Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Notes:  Repetitive rating; pulse width limited by max. junction temperature. (See fig. 11)  Limited by TJmax , starting TJ = 25°C, L = 0.08mH, RG = 25, IAS = 36A, VGS =10V. Part not recommended for use above this value.  Pulse width 1.0ms; duty cycle  2%. Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS Limited by TJmax , see Fig.12a, 12b, 15, 16 for typical repetitive avalanche performance. This value determined from sample failure population. 100% tested to this value in production.  When mounted on 1" square PCB (FR-4 or G-10 Material). For recommended footprint and soldering techniques refer to application note #AN-994 R is measured at TJ approximately 90°C Calculated continuous current based on maximum allowable junction temperature. Package limitation current is 42A. 2 2015-10-12 AUIRFR2905Z   1000 1000 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V 4.5V 100 BOTTOM TOP 10 1 4.5V  60µs PULSE WIDTH Tj = 25°C ID, Drain-to-Source Current (A) ID, Drain-to-Source Current (A) TOP 0.1 100 BOTTOM 10 4.5V  60µs PULSE WIDTH Tj = 175°C 1 0.1 1 10 100 0.1 0 VDS , Drain-to-Source Voltage (V) 10 100 100 Fig. 2 Typical Output Characteristics 50 Gfs, Forward Transconductance (S) 1000.0 ID, Drain-to-Source Current ) 1 VDS , Drain-to-Source Voltage (V) Fig. 1 Typical Output Characteristics 100.0 T J = 175°C T J = 25°C 10.0 VDS = 25V  60µs PULSE WIDTH 4.0 5.0 6.0 7.0 8.0 9.0 T J = 175°C 40 30 T J = 25°C 20 10 VDS = 15V 380µs PULSE WIDTH 0 1.0 10.0 VGS, Gate-to-Source Voltage (V) Fig. 3 Typical Transfer Characteristics 3 VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V 4.5V 0 10 20 30 40 50 ID, Drain-to-Source Current (A) Fig. 4 Typical Forward Transconductance Vs. Drain Current 2015-10-12 AUIRFR2905Z   2400 = C gd Coss = Cds + Cgd VGS, Gate-to-Source Voltage (V) Crss 2000 C, Capacitance (pF) 20 VGS = 0V, f = 1 MHZ Ciss = C gs + Cgd, C ds SHORTED 1600 Ciss 1200 800 Coss 400 ID= 36A VDS= 44V VDS= 28V VDS= 11V 16 12 8 4 FOR TEST CIRCUIT SEE FIGURE 13 Crss 0 0 1 10 100 0 VDS, Drain-to-Source Voltage (V) 30 40 50 Fig 6. Typical Gate Charge vs. Gate-to-Source Voltage 1000.0 1000 ID, Drain-to-Source Current (A) ISD, Reverse Drain Current (A) 20 QG Total Gate Charge (nC) Fig 5. Typical Capacitance vs. Drain-to-Source Voltage 100.0 OPERATION IN THIS AREA LIMITED BY R DS (on) 100 T J = 175°C 10.0 T J = 25°C 1.0 10 0.1 0.1 0.2 0.6 1.0 1.4 1.8 VSD , Source-toDrain Voltage (V) Fig. 7 Typical Source-to-Drain Diode Forward Voltage 2.2 100µsec 1msec 1 VGS = 0V   4 10 10msec Tc = 25°C Tj = 175°C Single Pulse 1 10 100 1000 VDS , Drain-toSource Voltage (V) Fig 8. Maximum Safe Operating Area 2015-10-12 AUIRFR2905Z   2.0 RDS(on) , Drain-to-Source On Resistance (Normalized) 70 LIMITED BY PACKAGE ID , Drain Current (A) 60 50 40 30 20 10 ID = 36A VGS = 10V 1.5 1.0 0.5 0 25 50 75 100 125 150 -60 -40 -20 175 0 20 40 60 80 100 120 140 160 180 T C , Case Temperature (°C) T J , Junction Temperature (°C) Fig 9. Maximum Drain Current Vs. Case Temperature Fig 10. Normalized On-Resistance Vs. Temperature Thermal Response ( Z thJC ) 10 1 D = 0.50 0.20 0.10 0.1 0.05 J 0.02 0.01 0.01 SINGLE PULSE ( THERMAL RESPONSE ) R1 R1 J 1 R2 R2 R3 R3 C 1 2 2 3 3 Ci= iRi Ci= iRi C Ri (°C/W) i (sec) 0.3962 0.00012 0.5693 0.00045 0.4129 0.0015 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc 0.001 1E-006 1E-005 0.0001 0.001 0.01 0.1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case 5 2015-10-12 AUIRFR2905Z   15V + V - DD IAS 20V 0.01 tp Fig 12a. Unclamped Inductive Test Circuit V(BR)DSS tp A EAS, Single Pulse Avalanche Energy (mJ) D.U.T RG 240 DRIVER L VDS ID 36A 8.6A BOTTOM 4.8A TOP 200 160 120 80 40 0 25 50 75 100 125 150 175 Starting T J, Junction Temperature (°C) Fig 12c. Maximum Avalanche Energy vs. Drain Current I AS Fig 12b. Unclamped Inductive Waveforms 4.5 Vds Vgs Vgs(th) Qgs1 Qgs2 Qgd Qgodr Fig 13a. Gate Charge Waveform VGS(th) Gate threshold Voltage (V) Id 4.0 3.5 ID = 250µA 3.0 2.5 2.0 -75 -50 -25 0 25 50 75 100 125 150 175 T J , Temperature ( °C ) Fig 14. Threshold Voltage Vs. Temperature Fig 13b. Gate Charge Test Circuit   6 2015-10-12 AUIRFR2905Z   1000 Avalanche Current (A) Duty Cycle = Single Pulse 100 Allowed avalanche Current vs avalanche pulsewidth, tav assuming  Tj = 25°C due to avalanche losses. Note: In no case should Tj be allowed to exceed Tjmax 0.01 10 0.05 0.10 1 0.1 1.0E-06 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 tav (sec) Fig 15. Typical Avalanche Current Vs. Pulse width Notes on Repetitive Avalanche Curves , Figures 15, 16: EAR , Avalanche Energy (mJ) 60 TOP Single Pulse BOTTOM 1% Duty Cycle ID = 36A 50 (For further info, see AN-1005 at www.infineon.com) 1. Avalanche failures assumption: Purely a thermal phenomenon and failure occurs at a temperature far in excess of Tjmax. This is validated for every part type. 2. Safe operation in Avalanche is allowed as long as Tjmax is not exceeded. 3. Equation below based on circuit and waveforms shown in Figures 12a, 12b. 4. PD (ave) = Average power dissipation per single avalanche pulse. 40 30 20 5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase during avalanche). 6. Iav = Allowable avalanche current. 10 7. T = Allowable rise in junction temperature, not to exceed Tjmax (assumed as 0 25 50 75 100 125 150 Starting T J , Junction Temperature (°C) 175 25°C in Figure 15, 16). tav = Average time in avalanche. D = Duty cycle in avalanche = tav ·f ZthJC(D, tav) = Transient thermal resistance, see Figures 13) PD (ave) = 1/2 ( 1.3·BV·Iav) = T/ ZthJC Iav = 2T/ [1.3·BV·Zth] Fig 16. Maximum Avalanche Energy Vs. Temperature 7 EAS (AR) = PD (ave)·tav 2015-10-12 AUIRFR2905Z   Fig 17. Peak Diode Recovery dv/dt Test Circuit for N-Channel HEXFET® Power MOSFETs Fig 18a. Switching Time Test Circuit   8 Fig 18b. Switching Time Waveforms 2015-10-12 AUIRFR2905Z   D-Pak (TO-252AA) Package Outline (Dimensions are shown in millimeters (inches)) D-Pak (TO-252AA) Part Marking Information Part Number AUFR2905Z YWWA IR Logo XX  Date Code Y= Year WW= Work Week XX Lot Code Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 9 2015-10-12 AUIRFR2905Z   D-Pak (TO-252AA) Tape & Reel Information (Dimensions are shown in millimeters (inches)) TR TRR 16.3 ( .641 ) 15.7 ( .619 ) 12.1 ( .476 ) 11.9 ( .469 ) FEED DIRECTION TRL 16.3 ( .641 ) 15.7 ( .619 ) 8.1 ( .318 ) 7.9 ( .312 ) FEED DIRECTION NOTES : 1. CONTROLLING DIMENSION : MILLIMETER. 2. ALL DIMENSIONS ARE SHOWN IN MILLIMETERS ( INCHES ). 3. OUTLINE CONFORMS TO EIA-481 & EIA-541. 13 INCH 16 mm NOTES : 1. OUTLINE CONFORMS TO EIA-481. Note: For the most current drawing please refer to IR website at http://www.irf.com/package/ 10 2015-10-12 AUIRFR2905Z   Qualification Information Qualification Level Moisture Sensitivity Level   Machine Model ESD Human Body Model   Charged Device Model RoHS Compliant Automotive (per AEC-Q101) Comments: This part number(s) passed Automotive qualification. Infineon’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. D-Pak MSL1 Class M3 (+/- 400V)† AEC-Q101-002 Class H1A (+/- 500V)† AEC-Q101-001 Class C5 (+/- 1125V)† AEC-Q101-005 Yes † Highest passing voltage. Revision History Date 10/12/2015 Comments   Updated datasheet with corporate template Corrected ordering table on page 1. Published by Infineon Technologies AG 81726 München, Germany © Infineon Technologies AG 2015 All Rights Reserved. IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”). With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.   11 2015-10-12