PD - 96334
AUTOMOTIVE GRADE
INSULATED GATE BIPOLAR TRANSISTOR
AUIRGS30B60K
AUIRGSL30B60K
C
VCES = 600V
Features
•
•
•
•
•
•
•
Low V CE(on) Non Punch Through IGBT Technology
10µs Short Circuit Capability
Square RBSOA
Positive V CE(on) Temperature Coefficient
Maximum Junction Temperature rated at 175°C
Lead-Free, RoHS Compliant
Automotive Qualified *
IC = 50A, TC=100°C
at TJ=175°C
G
tsc > 10µs, TJ=150°C
E
VCE(on) typ. = 1.95V
n-channel
Benefits
• Benchmark Efficiency for Motor Control
• Rugged Transient Performance
• Low EMI
D2Pak
AUIRGS30B60K
• Excellent Current Sharing in Parallel Operation
G
Gate
Absolute Maximum Ratings
TO-262
AUIRGSL30B60K
C
Collector
E
Emitter
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the
device. These are stress ratings only; and functional operation of the device at these or any other condition
beyond those indicated in the specifications is not implied.Exposure to absolute-maximum-rated conditions
for extended periods may affect device reliability. The thermal resistance and power dissipation ratings are
measured under board mounted and still air conditions. Ambient temperature (TA) is 25°C, unless otherwise
specified
Parameter
Max.
Units
V
VCES
Collector-to-Emitter Voltage
600
IC @ TC = 25°C
Continuous Collector Current
78
IC @ TC = 100°C
Continuous Collector Current
50
ICM
120
ILM
Pulse Collector Current (Ref.Fig.C.T.5)
Clamped Inductive Load current
VISOL
RMS Isolation Voltage, Terminal to Case, t=1 min.
2500
VGE
Gate-to-Emitter Voltage
±20
PD @ TC = 25°C
Maximum Power Dissipation
370
PD @ TC = 100°C Maximum Power Dissipation
180
c
TJ
Operating Junction and
TSTG
Storage Temperature Range
A
120
V
W
-55 to +175
°C
Soldering Temperature, for 10 sec.
300 (0.063 in. (1.6mm) from case)
Thermal / Mechanical Characteristics
Min.
Typ.
Max.
RθJC
Junction-to-Case- IGBT
Parameter
–––
–––
0.41*
RθCS
Case-to-Sink, flat, greased surface
–––
0.50
–––
RθJA
Junction-to-Ambient (PCB Mount, Steady State)
–––
–––
40
Wt
Weight
–––
1.44
–––
d
Units
°C/W
g
* RθJC (end of life) = 0.65°C/W. This is the maximum measured value after 1000 temperature cycles from -55 to 150°C
and is accounted for by the physical wearout of the die attach medium.
www.irf.com
1
10/14/10
AUIRGS/SL30B60K
Dynamic Electrical Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
V(BR)CES
∆V(BR)CES/∆TJ
VCE(on)
VGE(th)
∆VGE(th)/∆TJ
Collector-to-Emitter Breakdown Voltage
Temperature Coeff. of Breakdown Voltage
Collector-to-Emitter Voltage
gfe
ICES
Gate Threshold Voltage
Threshold Voltage temp. coefficient
Forward Transconductance
Zero Gate Voltage Collector Current
IGES
Gate-to-Emitter Leakage Current
Min. Typ. Max. Units
600
—
—
—
—
3.5
—
—
—
—
—
—
Conditions
Ref.Fig.
—
—
V VGE = 0V, IC = 500µA
0.40
— V/°C VGE = 0V, IC = 1mA (25°C-150°C)
IC = 30A, VGE = 15V, TJ = 25°C
1.95 2.35
2.40 2.75
V IC = 30A, VGE = 15V, TJ = 150°C
IC = 30A, VGE = 15V, TJ = 175°C
2.6 2.95
4.5
5.5
V VCE = VGE, IC = 250µA
-10
— mV/°C VCE = VGE, IC = 1.0mA (25°C-150°C)
18
—
S VCE = 50V, IC = 50A, PW = 80µs
VGE = 0V, VCE = 600V
5.0
250
1000 2000 µA VGE = 0V, VCE = 600V, TJ = 150°C
VGE = 0V, VCE = 600V, TJ = 175°C
1830 3000
—
±100 nA VGE = ±20V, VCE = 0V
5,6,7
8,9,10
8,9,10
11
Static or Switching Characteristics @ TJ = 25°C (unless otherwise specified)
Parameter
Qg
Qge
Qgc
Eon
Eoff
Etot
td(on)
tr
td(off)
tf
Eon
Eoff
Etot
td(on)
tr
td(off)
tf
LE
Cies
Coes
Cres
RBSOA
SCSOA
ISC (Peak)
Total Gate Charge (turn-on)
Gate-to-Emitter Charge (turn-on)
Gate-to-Collector Charge (turn-on)
Turn-On Switching Loss
Turn-Off Switching Loss
Total Switching Loss
Turn-On delay time
Rise time
Turn-Off delay time
Fall time
Turn-On Switching Loss
Turn-Off Switching Loss
Total Switching Loss
Turn-On delay time
Rise time
Turn-Off delay time
Fall time
Internal Emitter Inductance
Input Capacitance
Output Capacitance
Reverse Transfer Capacitance
Reverse Bias Safe Operating Area
Short Circuit Safe Operating Area
Peak Short Circuit Collector Current
Min. Typ. Max. Units
—
102 153
—
14
21
—
44
66
—
350 620
—
825 955
—
1175 1575
—
46
60
—
28
39
—
185 200
—
31
40
—
635 1085
—
1150 1350
—
1785 2435
—
46
60
—
28
39
—
205 235
—
32
42
—
7.5
—
—
1750
—
—
160
—
—
60
—
FULL SQUARE
10
—
—
200
—
—
Conditions
Ref.Fig.
IC = 30A
nC VCC = 400V
VGE = 15V
IC = 30A, VCC = 400V
µJ VGE = 15V, RG = 10Ω, L = 200µH
TJ = 25°C
IC = 30A, VCC = 400V
ns VGE = 15V, RG = 10Ω, L = 200µH
TJ = 25°C
17
CT1
CT4
e
µJ
ns
CT4
IC = 30A, VCC = 400V
VGE = 15V, RG = 10Ω, L = 200µH
TJ = 150°C
IC = 30A, VCC = 400V
VGE = 15V, RG = 10Ω, L = 200µH
TJ = 150°C
CT4
12,14
e
WF1,WF2
13,15
CT4
WF1
WF2
nH Measured 5mm from package
VGE = 0V
pF VCC = 30V
f = 1.0MHz
TJ = 150°C, IC = 120A, Vp = 600V
µs
16
4
VCC=500V,VGE = +15V to 0V,RG =10Ω
CT2
TJ = 150°C, Vp = 600V, RG = 10Ω
VCC=360V,V GE = +15V to 0V
WF3
A
CT3
WF3
Notes:
VCC = 80% (VCES), VGE = 20V, L = 28µH, RG = 22Ω.
This is applied to D2Pak, when mounted on 1" square PCB ( FR-4 or G-10 Material ).
For recommended footprint and soldering techniques refer to application note #AN-994.
Energy losses include "tail" and diode reverse recovery.
2
www.irf.com
AUIRGS/SL30B60K
Qualification Information†
Automotive
(per AEC-Q101)
Qualification Level
Comments: This part number(s) passed Automotive
qualification. IR’s Industrial and Consumer qualification
level is granted by extension of the higher Automotive
level.
2
D PAK
Moisture Sensitivity Level
MSL1
†††
(per IPC/JEDEC J-STD-020)
TO-262
Machine Model
††
N/A
Class M4 (400V)
AEC-Q101-002
ESD
Human Body Model
Class H2 (4000V)
AEC-Q101-001
Charged Device Model
Class C4 (1000V)
AEC-Q101-005
RoHS Compliant
†
Yes
Qualification standards can be found at International Rectifier’s web site: http://www.irf.com
†† Exceptions to AEC-Q101 requirements are noted in the qualification report.
††† Higher MSL ratings may be available for the specific package types listed here. Please
contact your International Rectifier sales representative for further information.
www.irf.com
3
AUIRGS/SL30B60K
80
400
70
350
60
300
50
IC (A)
250
Ptot (W)
40
30
200
150
20
100
10
50
0
0
20
40
60
0
80 100 120 140 160 180
0
T C (°C)
20
40
60
80 100 120 140 160 180
T C (°C)
Fig. 1 - Maximum DC Collector Current vs.
Case Temperature
Fig. 2 - Power Dissipation vs. Case
Temperature
1000
1000
100
100
IC A)
IC (A)
10 µs
10
100 µs
10
1ms
1
DC
0.1
1
10
100
1000
VCE (V)
Fig. 3 - Forward SOA
TC = 25°C; TJ ≤ 150°C
4
10000
1
10
100
1000
VCE (V)
Fig. 4 - Reverse Bias SOA
TJ = 150°C; VGE =15V
www.irf.com
AUIRGS/SL30B60K
60
50
VGE = 18V
VGE = 15V
50
VGE = 18V
VGE = 15V
40
VGE = 12V
VGE = 10V
40
VGE = 12V
VGE = 10V
VGE = 8.0V
ICE (A)
ICE (A)
60
30
VGE = 8.0V
30
20
20
10
10
0
0
0
1
2
3
4
0
5
1
2
3
4
5
VCE (V)
VCE (V)
Fig. 5 - Typ. IGBT Output Characteristics
TJ = -40°C; tp = 80µs
Fig. 6 - Typ. IGBT Output Characteristics
TJ = 25°C; tp = 80µs
ICE (A)
60
50
VGE = 18V
VGE = 15V
40
VGE = 12V
VGE = 10V
VGE = 8.0V
30
20
10
0
0
1
2
3
4
5
VCE (V)
Fig. 7 - Typ. IGBT Output Characteristics
TJ = 150°C; tp = 80µs
www.irf.com
5
20
20
18
18
16
16
14
14
12
ICE = 15A
10
ICE = 30A
8
ICE = 60A
VCE (V)
VCE (V)
AUIRGS/SL30B60K
12
ICE = 15A
10
ICE = 30A
8
ICE = 60A
6
6
4
4
2
2
0
0
5
10
15
20
5
10
VGE (V)
15
20
VGE (V)
Fig. 9 - Typical VCE vs. VGE
TJ = 25°C
Fig. 8 - Typical VCE vs. VGE
TJ = -40°C
250
20
18
T J = 25°C
T J = 150°C
200
16
12
10
ICE = 15A
ICE = 30A
8
ICE = 60A
ICE (A)
VCE (V)
14
150
100
6
T J = 150°C
50
4
T J = 25°C
2
0
0
5
10
15
VGE (V)
Fig. 10 - Typical VCE vs. VGE
TJ = 150°C
6
20
0
5
10
15
20
VGE (V)
Fig. 11 - Typ. Transfer Characteristics
VCE = 50V; tp = 10µs
www.irf.com
AUIRGS/SL30B60K
3000
1000
Swiching Time (ns)
2500
Energy (µJ)
2000
EOFF
1500
EON
1000
tdOFF
100
td ON
tF
500
tR
0
0
20
40
60
10
80
0
IC (A)
20
40
60
80
IC (A)
Fig. 12 - Typ. Energy Loss vs. IC
TJ = 150°C; L=200µH; VCE= 400V,
RG= 10Ω; VGE= 15V
Fig. 13 - Typ. Switching Time vs. IC
TJ = 150°C; L=200µH; VCE= 400V
RG= 10Ω; VGE= 15V
10000
3000
Energy (µJ)
2000
Swiching Time (ns)
2500
EOFF
EON
1500
1000
1000
tdOFF
100
tdON
tF
500
tR
10
0
0
25
50
75
100
RG (Ω)
Fig. 14 - Typ. Energy Loss vs. RG
TJ = 150°C; L=200µH; VCE= 400V
ICE= 30A; VGE= 15V
www.irf.com
125
0
25
50
75
100
125
RG (Ω)
Fig. 15 - Typ. Switching Time vs. RG
TJ = 150°C; L=200µH; VCE= 400V
ICE= 30A; VGE= 15V
7
AUIRGS/SL30B60K
16
10000
14
200V
12
1000
400V
10
VGE (V)
Capacitance (pF)
Cies
Coes
100
8
6
4
2
Cres
0
10
0
20
40
60
80
0
100
25
50
75
100
125
Q G, Total Gate Charge (nC)
VCE (V)
Fig. 16- Typ. Capacitance vs. VCE
VGE= 0V; f = 1MHz
Fig. 17 - Typical Gate Charge vs. VGE
ICE = 30A; L = 600µH
Thermal Response ( Z thJC )
10
1
0.1
0.01
D = 0.50
0.20
0.10
τJ
0.05
0.02
0.01
R1
R1
τJ
τ1
R2
R2
τC
τ1
τ2
τ2
τ
Ri (°C/W) τi (sec)
0.200
0.000428
0.209
0.013031
Ci= τi/Ri
Ci i/Ri
Notes:
1. Duty Factor D = t1/t2
2. Peak Tj = P dm x Zthjc + Tc
0.001
SINGLE PULSE
( THERMAL RESPONSE )
0.0001
1E-006
1E-005
0.0001
0.001
0.01
0.1
1
t1 , Rectangular Pulse Duration (sec)
Fig 18. Maximum Transient Thermal Impedance, Junction-to-Case (IGBT)
8
www.irf.com
AUIRGS/SL30B60K
L
L
VCC
DUT
0
+
-
80 V
DUT
Fig.C.T.1 - Gate Charge Circuit (turn-off)
Fig.C.T.2 - RBSOA Circuit
diode clamp /
DUT
Driver
L
- 5V
360V
DC
480V
Rg
1K
DUT /
DRIVER
DUT
VCC
Rg
Fig.C.T.3 - S.C.SOA Circuit
Fig.C.T.4 - Switching Loss Circuit
R=
DUT
VCC
ICM
VCC
Rg
Fig.C.T.5 - Resistive Load Circuit
www.irf.com
9
AUIRGS/SL30B60K
700
600
35
700
70
30
600
60
25
500
90% ICE
tf
300
15
5% V CE
5% ICE
100
0
400
40
300
30
10
200
5
100
0
0
90% test current
tr
10% test current
5% V CE
0.00
0.20
0.40
0.60
-5
0.80
-100
15.90
16.00
Time(µs)
16.10
10
16.20
-10
16.30
Time (µs)
Fig. WF1- Typ. Turn-off Loss Waveform
@ TJ = 150°C using Fig. CT.4
Fig. WF2- Typ. Turn-on Loss Waveform
@ TJ = 150°C using Fig. CT.4
600
300
500
250
ICE
400
200
VCE (V)
VCE
300
150
200
100
100
50
0
-5.00
0.00
5.00
10.00
ICE (A)
-100
-0.20
20
0
Eon Loss
Eof f Loss
ICE (A)
20
VCE (V)
400
200
50
TEST CURRENT
ICE (A)
V CE (V)
500
0
15.00
time (µS)
Fig. WF3- Typ. S.C Waveform
@ TC = 150°C using Fig. CT.3
10
www.irf.com
AUIRGS/SL30B60K
TO-262 Package Outline
Dimensions are shown in millimeters (inches)
TO-262 Part Marking Information
Part Number
AUGSL30B60K
YWWA
IR Logo
XX
or
Date Code
Y= Year
WW= Work Week
A= Automotive, Lead Free
XX
Lot Code
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
www.irf.com
11
AUIRGS/SL30B60K
D2Pak (TO-263AB) Package Outline
Dimensions are shown in millimeters (inches)
D2Pak (TO-263AB) Part Marking Information
Part Number
AUGS30B60K
YWWA
IR Logo
XX
or
Date Code
Y= Year
WW= Work Week
A= Automotive, Lead Free
XX
Lot Code
Note: For the most current drawing please refer to IR website at http://www.irf.com/package/
12
www.irf.com
AUIRGS/SL30B60K
D2Pak (TO-263AB) Tape & Reel Information
Dimensions are shown in millimeters (inches)
TRR
1.60 (.063)
1.50 (.059)
4.10 (.161)
3.90 (.153)
FEED DIRECTION 1.85 (.073)
1.65 (.065)
1.60 (.063)
1.50 (.059)
11.60 (.457)
11.40 (.449)
0.368 (.0145)
0.342 (.0135)
15.42 (.609)
15.22 (.601)
24.30 (.957)
23.90 (.941)
TRL
10.90 (.429)
10.70 (.421)
1.75 (.069)
1.25 (.049)
4.72 (.136)
4.52 (.178)
16.10 (.634)
15.90 (.626)
FEED DIRECTION
13.50 (.532)
12.80 (.504)
27.40 (1.079)
23.90 (.941)
4
330.00
(14.173)
MAX.
NOTES :
1. COMFORMS TO EIA-418.
2. CONTROLLING DIMENSION: MILLIMETER.
3. DIMENSION MEASURED @ HUB.
4. INCLUDES FLANGE DISTORTION @ OUTER EDGE.
www.irf.com
60.00 (2.362)
MIN.
26.40 (1.039)
24.40 (.961)
3
30.40 (1.197)
MAX.
4
13
AUIRGS/SL30B60K
Ordering Information
Base part number
AUIRGSL30B60K
AUIRGS30B60K
14
Package Type
TO-262
D2Pak
Standard Pack
Form
Tube
Tube
Tape and Reel Left
Tape and Reel Right
Complete Part Number
Quantity
50
50
800
800
AUIRGSL30B60K
AUIRGS30B60K
AUIRGS30B60KTRL
AUIRGS30B60KTRR
www.irf.com
AUIRGS/SL30B60K
IMPORTANT NOTICE
Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve
the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services
at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow
automotive industry and / or customer specific requirements with regards to product discontinuance and process change
notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment.
IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s
standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this
warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily
performed.
IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products
and applications using IR components. To minimize the risks with customer products and applications, customers should
provide adequate design and operating safeguards.
Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is
accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations
is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of
third parties may be subject to additional restrictions.
Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or
service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive
business practice. IR is not responsible or liable for any such statements.
IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the
body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product
could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such
unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees,
subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney
fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized
use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product.
IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR
products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as
military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has
not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal
and regulatory requirements in connection with such use.
IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR
products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation
“AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be
responsible for any failure to meet such requirements
For technical support, please contact IR’s Technical Assistance Center
http://www.irf.com/technical-info/
WORLD HEADQUARTERS:
233 Kansas St., El Segundo, California 90245
Tel: (310) 252-7105
www.irf.com
15
工商网监
湘ICP备2023018690号
