AUIRS2113STR

Dec. 13, 2009 Automotive Grade AUIRS211(0,3)S HIGH- AND LOW-SIDE DRIVER Features • • • • • • • • • • • • • • Floating channel designed for bootstrap operation Fully operational to +500 V or +600 V Tolerant to negative transient voltage – dV/dt immune Gate drive supply range from 10 V to 20 V Undervoltage lockout for both channels 3.3 V input logic compatible Separate logic supply range from 3.3 V to 20 V Logic and power ground ±5 V offset CMOS Schmitt-triggered inputs with pull-down Cycle by cycle edge-triggered shutdown logic Matched propagation delay for both channels Output in phase with inputs Leadfree, roHS Compliant Automotive qualified* Product Summary Topology VOFFSET 2 channels AUIRS2110 500 V max AUIRS2113 600 V max VOUT 10 V – 20 V Io+ & I o- (typical) 2.5 A / 2.5 A tON & tOFF (typical) Delay Matching (max.) 140 ns & 120 ns 35 ns max Package Option Typical Applications • • • • • • Hybrid electric vehicles Air condition drives, pumps, fans Automotive general purpose dual LS/HS driver Automotive motor drives Automotive DC/DC converters Automotive injection control 16-Lead SOIC AUIRS211(0,3)S Typical Connection Diagram www.irf.com © 2008 International Rectifier AUIRS211(0,3)S Table of Contents Page Description 3 Qualification Information 4 Absolute Maximum Ratings 5 Recommended Operating Conditions 5 Static Electrical Characteristics 6 Dynamic Electrical Characteristics 6 Functional Block Diagram 7 Input/Output Pin Equivalent Circuit Diagram 8 Lead Definitions 9 Lead Assignments 9 Application Information and Additional Details 10-11 Parameter Temperature Trends 12-14 Package Details 15 Tape and Reel Details 16 Part Marking Information 17 Ordering Information 18 www.irf.com © 2008 International Rectifier 2 AUIRS211(0,3)S Description The AUIRS211(0,3)S are high voltage, high speed power MOSFET and IGBT drivers with independent high and low side referenced output channels. Proprietary HVIC and latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output, down to 3.3 V logic. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use in high frequency applications. The floating channel can be used to drive an N-channel power MOSFET or IGBT in the high side configuration which operates up to 500 V or 600 V. www.irf.com © 2008 International Rectifier 3 AUIRS211(0,3)S Qualification Information† Qualification Level Moisture Sensitivity Level Machine Model ESD Human Body Model Charged Device Model IC Latch-Up Test RoHS Compliant † †† ††† Automotive (per AEC-Q100††) Comments: This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. MSL3††† 260°C SOIC16W (per IPC/JEDEC J-STD-020) Class M2 (Pass +/-200V) (per AEC-Q100-003) Class H1B (Pass +/-1000V) (per AEC-Q100-002) Class C4 (Pass +/-1000V) (per AEC-Q100-011) Class II, Level A (per AEC-Q100-004) Yes Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ Exceptions to AEC-Q100 requirements are noted in the qualification report. Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. www.irf.com © 2008 International Rectifier 4 AUIRS211(0,3)S Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min. Max. Units † (AUIRS2110) -0.3 520 ( ) VB High-side floating supply voltage (AUIRS2113) -0.3 620 (†) VS High-side floating supply offset voltage VB - 20 VB + 0.3 VHO High-side floating output voltage VS - 0.3 VB + 0.3 V VCC Low-side fixed supply voltage -0.3 20 VLO Low-side output voltage -0.3 VCC + 0.3 VDD Logic supply voltage -0.3 VSS + 20 (†) VSS Logic supply offset voltage VCC - 20 VCC + 0.3 VIN Logic input voltage (HIN, LIN & SD) VSS -0.3 VDD + 0.3 dVS/dt Allowable offset supply voltage transient (Fig. 2) — 50 V/ns PD Package power dissipation @ TA ≤ 25°C — RthJA Thermal resistance, junction to ambient — TJ Junction temperature — TS Storage temperature -55 TL Lead temperature (soldering, 10 seconds) — † All supplies are fully tested at 25 V, and an internal 20 V clamp exists for each supply. 1.25 W 100 150 150 300 °C/W °C Recommended Operating Conditions The input/output logic timing diagram is shown in Figure 1. For proper operation the device should be used within the recommended conditions. The VS and VSS offset rating are tested with all supplies biased at 15 V differential. Symbol VB Definition High-side floating supply absolute voltage Min. VS +10 (AUIRS2110) † VS High-side floating supply offset voltage (AUIRS2113) † VHO High-side floating output voltage VS VCC Low-side fixed supply voltage 10 VLO Low-side output voltage 0 VDD Logic supply voltage VSS + 3 VSS Logic ground offset voltage -5 (††) VIN Logic input voltage (HIN, LIN & SD) VSS TA Ambient temperature -40 † Logic operational for VS of -4 V to +500 V. Logic state held for VS of -4 V to – VBS. (Please refer to the Design Tip DT97 -3 for more details). †† When VDD < 5 V, the minimum VSS offset is limited to –VDD. www.irf.com Max. VS +20 500 600 VB 20 VCC VSS + 20 5 VDD 125 Units V °C © 2008 International Rectifier 5 AUIRS211(0,3)S Static Electrical Characteristics Unless otherwise noted, these specifications apply for an operating junction temperature range of -40°C ≤ Tj ≤ 125°C with bias conditions of VBIAS (VCC, VBS, VDD ) = 15 V, VSS = COM. The VIL, VTH and IIN parameters are referenced to VSS and are applicable to all three logic input leads: HIN, LIN and SD. The VO, and IO parameters are referenced to COM and are applicable to the respective output leads: HO or LO. Symbol VIH VIL VOH VOL ILK IQBS IQCC IQDD IIN+ IINVBSUV+ VBSUVVCCUV+ VCCUV- Definition Logic “1” input voltage Logic “0” input voltage High level output voltage, VBIAS - VO Low level output voltage, VO Min 9.5 — — — Offset supply leakage current — Quiescent VBS supply current Quiescent VCC supply current Quiescent VDD supply current Logic “1” input bias current Logic “0” input bias current VBS supply undervoltage positive going threshold VBS supply undervoltage negative going threshold VCC supply undervoltage positive going threshold VCC supply undervoltage negative going threshold — — — — — 7.5 7.0 7.4 7.0 IO+ Output high short circuit pulsed current ( IO- Output low short circuit pulsed current( †) 2.0 †) 2.0 Typ — — — — Max Units Test Conditions — 6.0 V 1.4 IO = 0 A 0.15 IO = 20 mA VB = VS = 500 — 50 V/600 V 70 130 VIN = 0 V or VDD 125 230 µA 5 30 20 40 VIN = VDD — 5.0 VIN = 0 V 8.6 9.7 8.2 9.4 V 8.5 9.6 8.2 9.4 VO = 0 V, VIN = VDD 2.5 — PW ≤ 10 us A VO = 15 V, VIN = 0 V 2.5 — PW ≤ 10 us (†) Guaranteed by design Dynamic Electrical Characteristics Unless otherwise noted, these specifications apply for an operating junction temperature range of -40°C ≤ Tj ≤ 125°C with bias conditions of VBIAS (VCC, VBS, VDD ) = 15 V, CL = 1000 pF, and VSS = COM. The dynamic electrical characteristics are measured using the test circuit shown in Fig. 3. Symbol ton toff tsd tr tf MT Definition Turn-on propagation delay Turn-off propagation delay Shutdown propagation delay Turn-on rise time Turn-off fall time Delay matching, HS & LS turn on/off Min — — — — — — Typ Max Units 140 230 120 210 125 220 ns 25 40 15 30 — 35 Test Conditions VS = 0 V VS = 500 V/600 V Note: Please refer to figures in Parameter Temperature Trends section www.irf.com © 2008 International Rectifier 6 AUIRS211(0,3)S Functional Block Diagram www.irf.com © 2008 International Rectifier 7 AUIRS211(0,3)S Input/Output Pin Equivalent Circuit Diagrams www.irf.com © 2008 International Rectifier 8 AUIRS211(0,3)S Lead Definitions Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Symbol LO COM VCC NC NC VS VB HO NC NC VDD HIN SD LIN VSS NC Description Low-side gate drive output Low-side return Low-side supply Not connected Not connected High-side floating supply return High-side floating supply High-side gate drive output Not connected Not connected Logic supply Logic input for high-side gate driver output (HO), in phase Logic input for shutdown Logic input for low-side gate driver output (LO), in phase Logic ground Not connected Lead Assignments www.irf.com © 2008 International Rectifier 9 AUIRS211(0,3)S Application Information and Additional Details Figure 1: Input/Output Timing Diagram Figure 2: Floating Supply Voltage Transient Test Circuit Figure 3: Switching Time Test Circuit www.irf.com © 2008 International Rectifier 10 AUIRS211(0,3)S Figure 4: Switching Time Waveform Definitions Figure 5: Shutdown Waveform Definitions Figure 6: Delay Matching Waveform Definitions www.irf.com © 2008 International Rectifier 11 AUIRS211(0,3)S Parameter Temperature Trends 260 Turn-off P ropagation Delay (ns) Turn-on P ropagation Delay (ns) Figures illustrated in this chapter provide information on the experimental performance of the AUIRS211(0,3)S HVIC. The line plotted in each figure is generated from actual lab data. A large number of individual samples were tested at three temperatures (-40 ºC, 25 ºC, and 125 ºC) in order to generate the experimental curve. The line consists of three data points (one data point at each of the tested temperatures) that have been connected together to illustrate the understood trend. The individual data points on the Typ. curve were determined by calculating the averaged experimental value of the parameter (for a given temperature). 220 180 140 M ax. Typ. M in. 100 -50 -25 0 25 50 75 100 125 190 165 140 115 M ax. Typ. 90 M in. -50 Temperature (oC) Figure 7. Turn-On Time vs. Temperature -25 0 25 50 75 100 125 Temperature (oC) Figure 8. Turn-Off Time vs. Temperature 28 Torn-On Rise Time (ns) SD Propagation Delay (ns) 190 165 140 115 90 M ax. Typ. 24 Typ. 22 M in. M in. -50 M ax. 26 20 -25 0 25 50 75 100 -50 125 -25 0 25 50 75 100 125 Temperature (oC) Temperature (oC) Figure 10. Turn-On Rise Time vs. Temperature Figure 9. Shutdown Time vs. Temperature www.irf.com © 2008 International Rectifier 12 AUIRS211(0,3)S 2.0 Turn-Off fall Time (ns) - 17 High Level Output (V) M ax. 16 15 Typ. 14 13 M in. -50 1.5 M ax. 1.0 Typ. 0.5 M in. 0.0 -25 0 25 50 75 100 -50 125 -25 0 Figure 11. Turn-Off Fall Time vs. Temperature Offset Supply Leakage Current (uA) Low Level Output (mV) 125 30 20 55 M ax. M ax. 10 50 Typ. M in. -50 -25 0 25 50 75 100 125 M in. Typ. 0 -50 -25 0 Figure 13. Low Level Output vs. Temperature Quiescent V CC Supply Current (uA) 85 M ax. Typ. 65 M in. -25 0 25 50 50 75 100 125 Figure 14. Offset Supply Current vs. Temperature 95 -50 25 Temperature (oC) Temperature (oC) Quiescent V BS Supply Current (uA) 100 40 60 55 75 Figure 12. High Level Output Voltage vs. Temperature (IO = 0 mA) 65 75 50 Temperature ( C) Temperature ( C) 45 25 o o 75 100 125 200 175 150 125 M ax. Typ. 100 M in. -50 -25 0 25 50 75 100 125 o o Temperature ( C) Temperature ( C) Figure 16. VCC Supply Current vs. Temperature Figure 15. VBS Supply Current vs. Temperature www.irf.com © 2008 International Rectifier 13 9.00 11.0 8.75 UV+ Threshold (V) 14.0 8.0 M ax. 5.0 Quiescent V Typ. M in. V Supply Current (uA) AUIRS211(0,3)S 2.0 -50 -25 0 25 50 75 100 M ax. 8.50 Typ. 8.25 M in. 8.00 125 -50 -25 o Temperature ( C) 50 75 100 125 Temperature ( C) Figure 18. VBS Undervoltage (+) vs. Temperature 9.0 V CC UV+ Threshold (V) 9.0 8.5 M ax. 8.0 Typ. M in. V UV- Threshold (V) 25 o Figure 17. VDD Supply Current vs. Temperature 7.5 0 7.0 -50 8.8 M ax 8.5 Typ. 8.3 8.0 -25 0 25 50 75 100 M in. -50 125 -25 0 25 50 75 100 125 Temperature (oC) Temperature ( oC) Figure 19. VBS Undervoltage (-) vs. Temperature Figure 20. VCC Undervoltage (+) vs. Temperature V CC UV- Threshold (V) 9.0 8.5 M ax 8.0 7.5 7.0 -50 Typ. M in. -25 0 25 50 75 100 125 Temperature ( oC) Figure 21. VCC Undervoltage (-) vs. Temperature www.irf.com © 2008 International Rectifier 14 AUIRS211(0,3)S Package Details: SOIC16WB www.irf.com © 2008 International Rectifier 15 AUIRS211(0,3)S Tape and Reel Details: SOIC16WB LOADED TAPE FEED DIRECTION A B H D F C NOTE : CONTROLLING DIMENSION IN MM E G CARRIER TAPE DIMENSION FOR 16SOICN Metric Imperial Code Min Max Min A 7.90 8.10 0.311 B 3.90 4.10 0.153 C 15.70 16.30 0.618 D 7.40 7.60 0.291 E 6.40 6.60 0.252 F 10.20 10.40 0.402 G 1.50 n/a 0.059 H 1.50 1.60 0.059 Max 0.318 0.161 0.641 0.299 0.260 0.409 n/a 0.062 F D C B A E G H REEL DIMENSIONS FOR 16SOICN Metric Imperial Code Min Max Min A 329.60 330.25 12.976 B 20.95 21.45 0.824 C 12.80 13.20 0.503 D 1.95 2.45 0.767 E 98.00 102.00 3.858 F n/a 22.40 n/a G 18.50 21.10 0.728 H 16.40 18.40 0.645 www.irf.com Max 13.001 0.844 0.519 0.096 4.015 0.881 0.830 0.724 © 2008 International Rectifier 16 AUIRS211(0,3)S Part Marking Information Part number AUIRSxxxxx Date code AYWW ? IR logo Pin 1 Identifier ? XXXX ? MARKING CODE P Lead Free Released Lot Code (Prod mode – 4 digit SPN code) Assembly site code Per SCOP 200-002 Non-Lead Free Released Ordering Information Standard Pack Base Part Number AUIRS2110S AUIRS2113S Package Type SOIC16W SOIC16W Complete Part Number Form Quantity Tube/Bulk 25 AUIRS2110S Tape and Reel 1000 AUIRS2110STR Tube/Bulk 25 AUIRS2113S Tape and Reel 1000 AUIRS2113STR www.irf.com © 2008 International Rectifier 17 AUIRS211(0,3)S IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 www.irf.com © 2008 International Rectifier 18