AUIRS4427S

th July 25 , 2012 Automotive Grade AUIRS4427S DUAL LOW SIDE DRIVER Features • • • • • • • • Gate drive supply range from 6 V to 20 V CMOS Schmitt-triggered inputs 3.3V and 5V logic compatible Two independent gate drivers Matched propagation delay for both channels Outputs in phase with inputs Leadfree, RoHS compliant Automotive qualified* Typical Applications • • • • Product Summary Topology General Driver VOUT 6V - 20V Io+ & I o- (typical) 2.3A & 3.3A ton & toff (typical) 50ns & 50ns Package Type Automotive General Purpose Dual Low Side Driver Automotive DC-DC converters Hybrid Power Train Drives Direct Fuel Injection SOIC8N Diagram for push-pull forward DC-DC converter application * Qualification standards can be found on IR’s web site www.irf.com © 2012 International Rectifier AUIRS4427S Table of Contents Page Diagram for push-pull forward dc-dc converter application 1 Description 3 Qualification Information 4 Absolute Maximum Ratings 5 Recommended Operating Conditions 5 Static Electrical Characteristics 6 Dynamic Electrical Characteristics 6 Functional Block Diagram 7 Input/Output Pin Equivalent Circuit Diagram 8 Lead Definitions 9 Lead Assignments 9 Application Information and Additional Details 10 Package Details: SOIC8 12 Package Details: SOIC8, Tape and Reel 13 Part Marking Information 14 Ordering Information 15 Important Notice 16 www.irf.com © 2012 International Rectifier 2 AUIRS4427S Description The AUIRS4427S is a low voltage, high speed power MOSFET and IGBT driver. Proprietary latch immune CMOS technologies enable ruggedized monolithic construction. The logic input is compatible with standard CMOS or LSTTL output. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays between two channels are matched. Typical Connection Diagram www.irf.com © 2012 International Rectifier 3 AUIRS4427S Qualification Information† Qualification Level Automotive †† (per AEC-Q100 ) Comments: This family of ICs has passed an Automotive qualification. IR’s Industrial and Consumer qualification level is granted by extension of the higher Automotive level. ††† Moisture Sensitivity Level SOIC8N Class M3 (+/-200V) (per AEC-Q100-003) Class H3A (+/-4000V) (per AEC-Q100-002) Class C5 (+/-1000V) (per AEC-Q100-011) Class II, Level B (per AEC-Q100-004) Yes Machine Model ESD MSL3 260°C (per IPC/JEDEC J-STD-020) Human Body Model Charged Device Model IC Latch-Up Test RoHS Compliant † Qualification standards can be found at International Rectifier’s web site http://www.irf.com/ †† Exceptions to AEC-Q100 requirements are noted in the qualification report. ††† Higher MSL ratings may be available for the specific package types listed here. Please contact your International Rectifier sales representative for further information. www.irf.com © 2012 International Rectifier 4 AUIRS4427S Absolute Maximum Ratings Absolute Maximum Ratings indicate sustained limits beyond which damage to the device may occur. All voltage parameters are absolute voltages referenced to COM. The thermal resistance and power dissipation ratings are measured under board mounted and still air conditions. Symbol Definition Min Max VCC Fixed supply voltage -0.3 20 VO Output voltage -0.3 VCC + 0.3 Logic input voltage Package power dissipation @ TA ≤ 25°C Thermal resistance, junction to ambient Junction temperature Storage temperature Lead temperature (soldering, 10 seconds) -0.3 — — — -55 — VCC + 0.3 0.625 200 150 150 300 VIN PD RthJA TJ TS TL Units V W °C/W °C Recommended Operating Conditions For proper operation, the device should be used within the recommended conditions. All voltage parameters are absolute voltages referenced to COM unless otherwise stated in the table. The offset rating is tested with supply of VCC = 15V. Symbol VCC VO VIN TA Definition Min 6 0 0 -40 Fixed supply voltage Output voltage Logic input voltage Ambient temperature www.irf.com Max 20 VCC VCC 125 Units V °C © 2012 International Rectifier 5 AUIRS4427S Static Electrical Characteristics VCC = 15V, TA = 25°C unless otherwise specified. The V IN, and IIN parameters are referenced to COM and are applicable to input leads: INA and INB. The VO and IO parameters are referenced to COM and are applicable to the output leads: OUTA and OUTB. Symbol VIH VIL VOH VOL IIN+ IINIQCC IO+ IO- Definition Logic “1” input voltage Logic “0” input voltage High level output voltage, VBIAS -VO Low level output voltage, VO Logic “1” input bias current Logic “0” input bias current Quiescent VCC supply current Min Typ Max Units 2.5 — — V — — 0.8 V — — 1.4 — — 0.15 — 5 15 µA -30 -10 — — 100 200 Output high short circuit pulsed current Output low short circuit pulsed current (†) 1.5 2.3 — 1.5 3.3 IO = 0 mA IO = 20 mA VIN = 5V VIN = 0V VIN = 0V or 5V VO = 0V, VIN = 5V PW ≤ 10 µs A (†) Test Conditions VO = 15V, VIN = COM — PW ≤ 10 µs (†) Guaranteed by design Dynamic Electrical Characteristics VCC = 15V, TA = 25°C, and C L = 1000pF unless otherwise specified. Symbol ton toff tr tf Definition Turn-on propagation delay Turn-off propagation delay Turn-on rise time Turn-off fall time Min Typ Max Units — 50 95 — 50 95 ns — 25 55 — 25 55 www.irf.com Test Conditions Figure 2 © 2012 International Rectifier 6 AUIRS4427S Functional Block Diagram www.irf.com © 2012 International Rectifier 7 AUIRS4427S Input/Output Pin Equivalent Circuit Diagrams www.irf.com © 2012 International Rectifier 8 AUIRS4427S Lead Definitions PIN Symbol 1 2 3 4 5 6 7 8 NC INA COM INB OUTB VCC OUTA Description No connection Logic input for gate driver output (OUTA), in phase Ground Logic input for gate driver output (OUTB), in phase Gate drive output B Supply voltage Gate drive output A NC No connection Lead Assignments www.irf.com © 2012 International Rectifier 9 AUIRS4427S Application Information and Additional Details Figure 1: Input/output Timing Diagram Figure 2: Switching Time Waveform Definitions www.irf.com © 2012 International Rectifier 10 AUIRS4427S VCC = 15V AUIRS4427S Figure 3: Switching Time Test Circuit www.irf.com © 2012 International Rectifier 11 AUIRS4427S Package Details, SOIC8N www.irf.com © 2012 International Rectifier 12 AUIRS4427S Package details: SOIC8N, Tape and Reel LOADED TAPE FEED DIRECTION A B H D F C NOTE : CONTROLLING DIMENSION IN MM E G CARRIER TAPE DIMENSION FOR 8SOICN Metric Imperial Code Min Max Min Max A 7.90 8.10 0.311 0.318 B 3.90 4.10 0.153 0.161 C 11.70 12.30 0.46 0.484 D 5.45 5.55 0.214 0.218 E 6.30 6.50 0.248 0.255 F 5.10 5.30 0.200 0.208 G 1.50 n/a 0.059 n/a H 1.50 1.60 0.059 0.062 F D C B A E G H REEL DIMENSIONS FOR 8SOICN Metric Code Min Max A 329.60 330.25 B 20.95 21.45 C 12.80 13.20 D 1.95 2.45 E 98.00 102.00 F n/a 18.40 G 14.50 17.10 H 12.40 14.40 Imperial Min Max 12.976 13.001 0.824 0.844 0.503 0.519 0.767 0.096 3.858 4.015 n/a 0.724 0.570 0.673 0.488 0.566 www.irf.com © 2012 International Rectifier 13 AUIRS4427S Part Marking Information Part number AS4427 Date code AYWW ? Pin 1 Identifier ? MARKING CODE P Lead Free Released IR logo ? XXXX Lot Code (Prod mode – 4 digit SPN code) Assembly site code Per SCOP 200-002 Non-Lead Free Released www.irf.com © 2012 International Rectifier 14 AUIRS4427S Ordering Information Standard Pack Base Part Number AUIRS4427S Package Type SOIC8N Complete Part Number Form Quantity Tube/Bulk 95 AUIRS4427S Tape and Reel 2500 AUIRS4427STR www.irf.com © 2012 International Rectifier 15 AUIRS4427S IMPORTANT NOTICE Unless specifically designated for the automotive market, International Rectifier Corporation and its subsidiaries (IR) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or services without notice. Part numbers designated with the “AU” prefix follow automotive industry and / or customer specific requirements with regards to product discontinuance and process change notification. All products are sold subject to IR’s terms and conditions of sale supplied at the time of order acknowledgment. IR warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with IR’s standard warranty. Testing and other quality control techniques are used to the extent IR deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. IR assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using IR components. To minimize the risks with customer products and applications, customers should provide adequate design and operating safeguards. Reproduction of IR information in IR data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alterations is an unfair and deceptive business practice. IR is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of IR products or serviced with statements different from or beyond the parameters stated by IR for that product or service voids all express and any implied warranties for the associated IR product or service and is an unfair and deceptive business practice. IR is not responsible or liable for any such statements. IR products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or in any other application in which the failure of the IR product could create a situation where personal injury or death may occur. Should Buyer purchase or use IR products for any such unintended or unauthorized application, Buyer shall indemnify and hold International Rectifier and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that IR was negligent regarding the design or manufacture of the product. IR products are neither designed nor intended for use in military/aerospace applications or environments unless the IR products are specifically designated by IR as military-grade or “enhanced plastic.” Only products designated by IR as military-grade meet military specifications. Buyers acknowledge and agree that any such use of IR products which IR has not designated as military-grade is solely at the Buyer’s risk, and that they are solely responsible for compliance with all legal and regulatory requirements in connection with such use. IR products are neither designed nor intended for use in automotive applications or environments unless the specific IR products are designated by IR as compliant with ISO/TS 16949 requirements and bear a part number including the designation “AU”. Buyers acknowledge and agree that, if they use any non-designated products in automotive applications, IR will not be responsible for any failure to meet such requirements. For technical support, please contact IR’s Technical Assistance Center http://www.irf.com/technical-info/ WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245 Tel: (310) 252-7105 www.irf.com © 2012 International Rectifier 16