BGSA14M2N10E6327XTSA1

SP005561452 BGSA14M2N10 Ultra small antenna tuning SP4T Features        Ultra low RON resistance of 0.85 Ω in ON state Low COFF capacitance of 160 fF in OFF state High RF operating peak voltage handling of 45 V in OFF state MIPI RFFE 2.1 control interface Extremely low current consumption of 22 µA 4 default USID addresses via external USID_SEL pin Small form factor 0.95 mm x 1.3 mm (MSL1, 260 °C per JEDEC J-STD-020) Potential applications   Impedance, Antenna and Inductance Tuning Tunable Filters Description The BGSA14M2N10 is a very small single-pole four throws (SP4T) Antenna Tuning switch optimized for RF applications up to 7.125GHz. Its MIPI RFFE digital control interface allows easy implementation and best flexibility when operated in cellular mobile RF Front-End designs. The BGSA14M2N10 includes 4 low RON ports making it ideal for high Q tuning applications. Thanks to its high RF voltage ruggedness, it is suited for switching any reactive devices such as inductors and capacitors in RF matching circuits without significant losses. Datasheet Summary www.infineon.com Please read the Important Notice and Warnings at the end of this document page 1 of 2 Revision 2.0 2021-12-17 Ultra small antenna tuning SP4T Block diagram and ordering information Figure 1 BGSA14M2N10 Block diagram Table 1 Ordering Information Type Marking Package Product name BGSA14M2N10 M2 TSNP-10-9 BGSA 14M2N10 E6327 For more technical information, please contact our Technical Assistance Center or your local Infineon representative. Trademarks All referenced product or service names and trademarks are the property of their respective owners. Edition 2019-09-16 Published by Infineon Technologies AG 81726 München, Germany © 2022 Infineon Technologies AG. All Rights Reserved. Do you have a question about this document? Email: erratum@infineon.com Document reference ifx1 IMPORTANT NOTICE The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics (“Beschaffenheitsgarantie”) . With respect to any examples, hints or any typical values stated herein and/or any information regarding the application of the product, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation warranties of non-infringement of intellectual property rights of any third party. In addition, any information given in this document is subject to customer’s compliance with its obligations stated in this document and any applicable legal requirements, norms and standards concerning customer’s products and any use of the product of Infineon Technologies in customer’s applications. The data contained in this document is exclusively intended for technically trained staff. It is the responsibility of customer’s technical departments to evaluate the suitability of the product for the intended application and the completeness of the product information given in this document with respect to such application. For further information on the product, technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies office (www.infineon.com). WARNINGS Due to technical requirements products may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies office. Except as otherwise explicitly approved by Infineon Technologies in a written document signed by authorized representatives of Infineon Technologies, Infineon Technologies’ products may not be used in any applications where a failure of the product or any consequences of the use thereof can reasonably be expected to result in personal injury.