BSO207PHXUMA1

BSO207P H OptiMOS® P-Power-Transistor Product Summary Features V DS • dual P-Channel in SO8 R DS(on),max • Qualified according JEDEC for target applications • 150°C operating temperature -20 V V GS=4.5 V 45.0 mΩ V GS=2.5 V 70.0 ID -5.7 A • Super Logic Level (2.5V rated) • Pb-free plating; RoHS compliant PG-DSO-8 • Halogen-free according to IEC61249-2-21 Type Package Marking Lead free Halogen free BSO207P H PG-DSO-8 207P Yes Yes Packing dry Maximum ratings, at T j=25 °C, unless otherwise specified Parameter Continuous drain current 1) ID steady state V GS=4.5 V, T A=25 °C -5.7 -5.0 V GS=4.5 V, T A=70 °C -4.6 -4.0 V GS=2.5 V, T A=25 °C -4.5 -4.0 V GS=2.5 V, T A=70 °C -3.6 -3.2 I D,pulse T A=25 °C Avalanche energy, single pulse E AS I D=-5.7 A, R GS=25 Ω Gate source voltage V GS Power dissipation1) P tot Operating and storage temperature T j, T stg T A=25 °C JESD22-A114 HBM A -22.8 44 mJ ±12 V 2 1.6 -55 ... 150 W °C 1A < 500V 260 Soldering temperature °C 55/150/56 IEC climatic category; DIN IEC 68-1 Rev.1.3 Unit 10 secs Pulsed drain current2) ESD class Value Symbol Conditions page 1 2010-01-21 BSO207P H Parameter Values Symbol Conditions Unit min. typ. max. - - 35 minimal footprint, t p≤10 s - - 110 minimal footprint, steady state - - 150 6 cm2 cooling area1), t p≤10 s - - 62.5 6 cm2 cooling area1), steady state - - 80 Thermal characteristics Thermal resistance, junction - soldering point R thJS Thermal resistance, junction - ambient R thJA K/W Electrical characteristics, at T j=25 °C, unless otherwise specified Static characteristics Drain-source breakdown voltage V (BR)DSS V GS=0 V, I D= 0.25 mA -20 - - Gate threshold voltage V GS(th) V DS=V GS, I D=44 µA -0.6 -0.9 -1.2 Zero gate voltage drain current I DSS V DS=-20 V, V GS=0 V, T j=25 °C - 0.1 1 V DS=-20 V, V GS=0 V, T j=150 °C - 10 100 V µA Gate-source leakage current I GSS V GS= -12 V, V DS=0 V - - -100 nA Drain-source on-state resistance R DS(on) V GS=2.5 V, I D=-4.5 A - 44 70 mΩ V GS=4.5 V, I D=-5.7 A - 32 45 - 7.7 - Ω 10 18 - S Gate resistance RG Transconductance g fs |V DS|>2|I D|R DS(on)max, I D=-4.6 A 1) Device on 40 mm x 40 mm x 1.5 mm epoxy PCB FR4 with 6 cm2 (one layer, 70 µm thick) copper area for drain connection. PCB is vertical in still air. 2) See figure 3 for more detailed information 3) See figure 13 for more detailed information Rev.1.3 page 2 2010-01-21 BSO207P H Parameter Values Symbol Conditions Unit min. typ. max. - 1100 1650 - 380 570 Dynamic characteristics Input capacitance C iss V GS=0 V, V DS=15 V, f =1 MHz Output capacitance C oss Reverse transfer capacitance Crss - 310 465 Turn-on delay time t d(on) - 9 14 Rise time tr - 22 33 Turn-off delay time t d(off) - 33 50 Fall time tf - 35 53 Gate to source charge Q gs - -2 -3 Gate charge at threshold Q g(th) - -2 -3 Gate to drain charge Q gd - -5 -7 Switching charge Q sw - -5 -7 Gate charge total Qg - -12 -16 Gate plateau voltage V plateau - -1.7 -2.5 Output charge Q oss - 7 9 - - -2.2 - - -23 V DD=-10 V, V GS=4.5 V, I D=-5.7 A, R G=1.6 Ω pF ns Gate Charge Characteristics 4) V DD=-10 V, I D=-5.7 A, V GS=0 to 4.5 V V DD=-10 V, V GS=0 V nC V nC Reverse Diode Diode continuous forward current IS Diode pulse current I S,pulse Diode forward voltage V SD V GS=0 V, I F=-5.7 A, T j=25 °C - - -1.1 Reverse recovery charge Q rr V R=10 V, I F=I S, di F/dt =100 A/µs - 6.2 - 4) Rev.1.3 T A=25 °C A V nC See figure 16 for gate charge parameter definition page 3 2010-01-21 BSO207P H 1 Power dissipation 2 Drain current P tot=f(T A); t p≤10 s I D=f(T A); t p≤10 s 2.6 6.5 2.4 6 2.2 5.5 2 5 1.8 4.5 1.6 4 1.4 3.5 - I D [A] P tot [W] parameter: V GS = 4.5 V 1.2 3 1 2.5 0.8 2 0.6 1.5 0.4 1 0.2 0.5 0 0 0 40 80 120 160 0 40 80 T A [°C] 120 160 T A [°C] 3 Safe operating area 4 Max. transient thermal impedance I D=f(V DS); T A=25 °C2); D =0 Z thJA=f(t p)2) parameter: t p parameter: D =t p/T 102 102 0.5 0.2 101 100 µs 101 Z thJA [K/W] I D [A] 1 ms 10 ms 100 limited by on-state resistance 100 ms 0.01 10 0 single pulse 10-2 10-1 -1 10 0 10 1 10 2 10-6 10-5 10-4 10-3 10-2 10-1 100 101 102 t p [s] V DS [V] Rev.1.3 0.02 10-1 10 s 10 0.1 0.05 page 4 2010-01-21 BSO207P H 5 Typ. output characteristics 6 Typ. drain-source on resistance I D=f(V DS); T j=25 °C R DS(on)=f(I D); T j=25 °C parameter: V GS parameter: V GS 20 150 4.5 V 140 2.5 V 18 2.2 V 130 16 120 110 2.0V 14 100 10 90 R DS(on) [mΩ] - I D [A] 12 1.8 V 8 80 2.2 V 70 60 6 4 2.0 V 50 2.5 V 40 3.0 V 4.5 V 30 1.5 V 20 2 10 0 0 0 1 2 3 4 10 V 0 2 4 - V DS [V] 6 8 10 12 14 16 18 20 - I D [A] 7 Typ. transfer characteristics 8 Typ. forward transconductance I D=f(V GS); |V DS|>2|I D|R DS(on)max g fs=f(I D); T j=25 °C parameter: T j 35 40 30 35 30 25 g fs [S] - I D [A] 25 20 15 20 15 150 °C 10 10 25°C 5 150 °C 5 25 °C 0 0.0 0.5 1.0 1.5 2.0 2.5 - V GS [V] Rev.1.3 0 0 5 10 15 20 I D [A] page 5 2010-01-21 BSO207P H 9 Drain-source on-state resistance 10 Typ. gate threshold voltage R DS(on)=f(T j); I D= -5.7 A; V GS= -4.5 V V GS(th)=f(T j); V GS=V DS; I D= -44 µA 60 1.6 55 1.4 1.2 98 % 45 1 V GS(th) [V] R DS(on) [mΩ] 50 40 35 0.8 0.6 typ 30 0.4 25 0.2 20 0 -60 -20 20 60 100 140 -60 -20 20 60 100 140 180 T j [°C] T j [°C] 11 Typ. capacitances 12 Forward characteristics of reverse diode C =f(V DS); V GS=0 V; f =1 MHz I F=f(V SD) parameter: T j 104 102 101 10 I F [A] C [pF] 25 °C Ciss 3 150 °C 100 150 °C, 98% Coss Crss 25 °C, 98% 102 10-1 0 5 10 15 20 - V DS [V] Rev.1.3 0 0.5 1 1.5 2 V SD [V] page 6 2010-01-21 BSO207P H 13 Avalanche characteristics 14 Typ. gate charge I AS=f(t AV); R GS=25 Ω V GS=f(Q gate); I D=-5.7 A pulsed parameter: T j(start) parameter: V DD 10 1 10 9 25 °C 8 100 °C 7 4V 10 V 125 °C 16 V - I AV [A] - V GS [V] 6 100 5 4 3 2 1 0 10 0 -1 100 t AV [µs] 101 102 6 15 Drain-source breakdown voltage 12 18 24 - Q gate [nC] 103 16 Gate charge waveforms V BR(DSS)=f(T j); I D=0.25 mA 23 V GS 22.5 Qg 22 - V BR(DSS) [V] 21.5 21 20.5 V g s(th) 20 19.5 19 Q g(th) Q sw 18.5 Q gs 18 -60 -20 20 60 100 140 Q g ate Q gd 180 T j [°C] Rev.1.3 page 7 2010-01-21 BSO207P H Package Outline PG-DSO-8: Outline Footprint Dimensions in mm Rev.1.3 page 8 2010-01-21 BSO207P H Published by Infineon Technologies AG 81726 Munich, Germany © 2009 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com). Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Rev.1.3 page 9 2010-01-21