CY8CKIT-028-EPD

    E-ink Display Shield Board CY8CKIT-028EPD Last Updated: Mar 26, 2018 Ultra-low-power Display, Sensors, and Arduino Uno Compatibility The E‐ink Display Shield Board (CY8CKIT‐028‐EPD) has been designed such that an ultra‐low‐power E‐ ink display, sensors and a microphone can interface with Cypress' PSoC 4 and PSoC 6 MCUs. It comes with the features below to enable everyday objects to connect to the Internet of Things (IoT).     Ultra‐low‐power 2.7 inch E‐ink Display Motion Sensor Temperature Sensor PDM Microphone The E‐ink Display Shield Board uses the Arduino Uno pin layout, enabling this shield board to be used with Cypress' PSoC 4 and PSoC 6 MCU based Pioneer Kits. The table below shows the pin mapping for the PSoC 4 and PSoC 6 MCU Pioneer Kits that the E‐ink Display Shield is compatible with: Arduino CY8CKIT‐028‐ EPD CY8CKIT‐062‐BLE CY8CKIT‐062‐ CY8CKIT‐046 WiFi‐BT P12[3] P6[3] P12[0] P6[0] P12[1] P6[1] P12[2] P6[2] P5[2] P1[0] P5[3] P1[1] P5[4] P1[2] P5[5] P1[3] P5[6] P5[6] P0[2] P5[5] P10[0] P2[0] P10[1] P2[1] P10[2] P2[2] P10[3] P2[3] P10[4] P2[4] P10[5] P2[5] P6[0] P4[0] P6[1] P4[1] CY8CKIT‐044 CY8CKIT‐042‐ BLE CY8CKIT‐042 P0[2] P0[0] P0[1] P0[3] P1[6] P1[7] P1[3] P1[2] P1[1] P1[0] P3[0] P3[1] P3[2] P3[3] P3[4] P3[5] P3[5] P3[4] P3[4] P3[0] P3[1] P0[6] P0[7] P3[7] P0[0] P3[5] P1[0] P2[7] P2[0] P2[1] P2[2] P2[3] P2[4] P2[5] P4[0] P4[1] D10 D11 D12 D13 D2 D3 D4 D5 D6 D7 A0 A1 A2 A3 A4 A5 SCL SDA SSEL MOSI MISO SCLK EPD_RST BUSY EPD_EN DISCH BORDER IO_EN THER_VDD THER_OUT THER_OUT THER_GND PDM_CLK PDM_DATA I2C_SCL I2C_SDA P2[7] P6[0] P6[1] P6[2] P1[0] P1[1] P1[2] P1[3] P5[3] P5[5] P2[0] P2[1] P2[2] P2[3] P2[4] P2[5] P4[0] P4[1] Code Example in PSoC Creator for the E‐Ink Display Shield Board (CY8CKIT‐028‐EPD) Project Development Platform CE218133 PSoC 6 MCU E‐Ink Display with CapSense CY8CKIT‐062‐BLE & CY8CKIT‐062‐ WiFi‐BT kit with PSoC Creator 4.2 software Description This code example show how to create a user‐interface design using an E‐Ink display and CapSense Kit Contents: E‐ink Display Shield                   http://www.cypress.com/documentation/development‐kitsboards/e‐ink‐display‐shield‐board‐cy8ckit‐028‐epd 4‐6‐18