TFT Display Shield Board CY8CKIT-028-TFT
TFT Display, Audio, and Multiple Sensors
The TFT Display Shield Board (CY8CKIT-028-TFT) has been designed such that a TFT display,
audio devices, and sensors can interface with Cypress' PSoC 6 MCUs.
It comes with the features below to enable everyday objects to connect to the Internet of Things
(IoT).
2.4 inch TFT Display
Motion Sensor
Ambient Light Sensor
PDM Microphone
Audio Codec
3.5‐mm Audio Jack
The TFT Display Shield Board is compatible with the PSoC 6 WiFi-BT Pioneer Kit CY8CKIT062-WiFi-BT and the PSoC 6 BLE Pioneer Kit CY8CKIT-062-BLE.
The table below shows the pin mapping for the PSoC 6 MCU Pioneer Kits that the TFT Display
Shield is compatible with:
Arduino Function
CY8CKIT‐028‐
TFT Shield
Function
CY8CKIT‐062‐BLE
CY8CKIT‐062‐WiFi‐BT
VIN
VIN
NC
VIN
J1.2
GND
GND
GND
GND
J1.3
GND
GND
GND
GND
J1.4
5 V
5 V
NC
5 V
J1.5
3.3 V
3.3 V
VCC 3.3V
3.3 V
J1.6
RESET
RESET
NC
SWD RESET
J1.7
I/O REF
I/O REF
VIO REF
P6 VDD
J1.8
‐‐
‐‐
NC
NC
J2.1
A0
ADC0
ALS OUT
P10[0]
J2.2
‐‐
‐‐
TFT DISP DB8
P9[0]
J2.3
A1
ADC1
Codec PDN SW
P10[1]
J2.4
‐‐
‐‐
TFT DISP DB9
P9[1]
J2.5
A2
ADC2
IMU INT1
P10[2]
J2.6
‐‐
‐‐
TFT DISP DB10
P9[2]
J2.7
A3
ADC3
IMU INT2
P10[3]
J2.8
‐‐
‐‐
NC
P9[3]
J2.9
A4
ADC4 / SDA (I2C)
PDM CLK
P10[4]
J2.10
‐‐
‐‐
TFT DISP DB11
P9[4]
PCB Connector Pin
Number
Arduino Pin
J1.1
Arduino Function
CY8CKIT‐028‐
TFT Shield
Function
CY8CKIT‐062‐BLE
CY8CKIT‐062‐WiFi‐BT
A5
ADC5
PDM DATA
P10[5]
J2.12
‐‐
‐‐
TFT DISP DB12
P9[5]
J3.1
D8
DIGITAL I/O
TFT DISP DB14
P13[0]
J3.2
D9
PWM
TFT DISP DB15
P13[1]
J3.3
D10
SS/PWM
TFT DISP RD_L
P12[3]
J3.4
D11
MOSI/PWM
TFT DISP WR_L
P12[0]
J3.5
D12
MISO
TFT DISP D/C
P12[1]
J3.6
D13
SCK
TFT DISP RST_L
P12[2]
J3.7
GND
GND
GND
GND
J3.8
AREF
analog ref i/p
NC
VREF
J3.9
SDA
SDA
I2C SDA (IMU
and audio
codec)
P6[1]
P6[0]
PCB Connector Pin
Number
Arduino Pin
J2.11
J3.10
SCL
SCL
I2C SCL (IMU
and audio
codec)
J4.1
D0
RX
I2S MCLK
P5[0]
J4.2
D1
TX
I2S TX SCK
P5[1]
J4.3
D2
DIGITAL I/O
I2S TX WS
P5[2]
J4.4
D3
PWM, I/O
I2S TX SDO
P5[3]
J4.5
D4
DIGITAL I/O
I2S RX SCK
P5[4]
Arduino Function
CY8CKIT‐028‐
TFT Shield
Function
CY8CKIT‐062‐BLE
CY8CKIT‐062‐WiFi‐BT
D5
PWM, I/O
I2S RX WS
P5[5]
J4.7
D6
PWM, I/O
I2S RX SDI
P5[6]
J4.8
D7
DIGITAL I/O
TFT DISP DB13
P0[2]
PCB Connector Pin
Number
Arduino Pin
J4.6
Code Examples in PSoC Creator and WICED Studio for the TFT Display Shield Board
(CY8CKIT-028-TFT).
Development
Description
Platform
Project
CY8CKIT‐062‐
WiFi‐BT kit
with PSoC
Creator 4.2
software
This code example shows how PSoC 6 MCU can
be used to record audio data, store it, and play it
back. It uses a digital microphone with the
PDM/PCM hardware block. All the audio data
captured by the microphone is stored in an
external flash memory. After the recording is
completed, you can play the audio data over I2S,
which interfaces with an audio codec. You can
record/play/ pause/resume with CapSense
buttons. You control the audio volume with a
CapSense slider. The TFT LCD displays the current
state of the voice recorder, the volume, and the
time of the record/play.
CY8CKIT‐062‐
WiFi‐BT kit
CE222494_WiFi_BT_WICED_WiFi_Demo
with WICED
6.1 software
This code example demonstrates how to use
PSoC 6 MCU and WICED to enable WiFi
communication. It demonstrates how the PSoC 6
MCU with the 4343W module can be used as a
configuration access point (AP) to allow a user to
enter the credentials of their personal network.
CE222221_TFT_VoiceRecorder
To find out more on the CY8CKIT-062-WiFi-BT hardware, PSoC Creator 4.2, and
WICED Studio 6.1, download the CY8CKIT-062-WiFi-BT Kit Guide from here.
To find standalone PSoC 6 MCU code examples for the CY8CKIT-062-WiFi-BT Pioneer Kit,
you can also visit the PSoC 6 Code Examples page.
Kit Contents:
TFT Display Shield
http://www.cypress.com/documentation/development‐kitsboards/tft‐display‐shield‐board‐cy8ckit‐028‐tft 4‐5‐18
很抱歉,暂时无法提供与“CY8CKIT-028-TFT”相匹配的价格&库存,您可以联系我们找货
免费人工找货- 国内价格 香港价格
- 1+734.083701+93.49500