CYBLE-022001-EVAL

EZ-BLETM PROCTM EVALUATION BOARD The EZ-BLETM PRoCTM Evaluation Board (CYBLE-022001-EVAL) enables you to evaluate and develop applications on the EZ-BLE PRoC Module (CYBLE-022001-00). The EZ-BLE PRoC Module is a fully-integrated, fully-certified, 10 mm x 10 mm x 1.8 mm, programmable, Bluetooth® Smart module designed to reduce your time-to-market. For more information visit: www.cypress.com/EZ-BLEPRoCModule - The EZ-BLE PRoC Module home page. www.cypress.com/EZ-BLEPRoCEval - The EZ-BLE PRoC Evaluation Board kit page. www.cypress.com/go/AN96841 - The getting started guide. EZ-BLE PROC Module Cmod J2 Header (Bottom Side) P0_6 P1_4 P0_7 XRES P1_5 GND VDD J3 Header VDD VDDR J4 MiniProg3 Programming Header P5_1 P5_0 GND VDD P3_6 P3_7 J1 Header (Bottom Side) P5_1 P5_0 P3_4 P0_5 P1_7 P4_1 VDDR P3_5 P0_4 P1_6 GND P0_6 (SWDIO) P0_7 (SWDCLK) XRES GND VDD Fig 1: CYBLE-022001-EVAL Pinout Description Note: To use the CYBLE-022001-EVAL you must separately purchase either the CY8CKIT-002 MINIPROG3 or the CY8CKIT-042-BLE BLE PIONEER KIT. EZ-BLETM PROCTM EVALUATION BOARD 1: Connect the CYBLE-022001-EVAL to the CY8CKIT-002 (MiniProg3) Connect a jumper on the J3 header Connect the MiniProg3 to the J4 header Pin Mapping CY8CKIT-002 VDD GND GND J3 Fig 2: J3 Header CYBLE-022001-EVAL VTARG RES XRES SCLK P0_7 SDAT P0_6 Fig 3: Programming/Debugging with MiniProg3 OR Plug the CYBLE-022001-EVAL on the CY8CKIT-042-BLE baseboard. Note: Jumper on CYBLE-022001-EVAL’s J3 header can be connected or disconnected. Fig 4: Programming and debugging with CY8CKIT-042-BLE BLE Pioneer Kit Baseboard Pin Mapping between CY8CKIT-042-BLE (Base) and CYBLE-022001-EVAL (Eval) (Base) (Eval) (Base) (Eval) (Base) (Eval) (Base) (Eval) GND GND P2_4 P0_5 P2_3 P1_6 P3_7 P3_7 VDDD, VDDDA VDD P0_6 P0_6 P2_2 P1_7 P2_1 P4_1 VDDR VDDR P0_7 P2_6 P3_4 P5_0 P5_0 XRES XRES P0_7 P1_4 P1_4 P2_7 P3_5 P5_1 P5_1 P2_5 P0_4 P1_5 P1_5 P3_6 P3_6 2: Create a project using the CYBLE-022001-00 MPN and program/debug using PSoC® CreatorTM 3.1 SP2 (or above) The EZ-BLE PRoC Module is qualified for the Bluetooth 4.1 specification and is certified for the 2.4 GHz unlicensed frequency range in USA (FCC), Canada (IC), Europe (CE), Japan (TELEC) and Korea (KC). Visit www.cypress.com/go/support for technical support © 2015 Cypress Semiconductor Corporation. All rights reserved. All trademarks or registered trademarks referenced herein are the properties of their respective owners. 001-97032 Rev.*C