CYW94343WWCD1-EVB

  CYW94343WWCD1_EVB Evaluation and Development Kit Last Updated: Jan 24, 2019 Note: If using this kit with WICED Studio 6.1 or older, please use platform files BCM94343WWCD1. The Cypress CYW94343WWCD1_EVB kit includes a CYW94343WWCD1 SIP module mounted on a full‐ featured USB‐based evaluation and development board that is fully compatible with the WICED™ Studio. The onboard SIP module leverages the CYW4343W, featuring an 802.11b/g/n Wi‐Fi MAC/baseband/radio and Bluetooth 4.2. In addition, the module integrates a power amplifier (PA) that meets the output power requirements of most handheld systems, a low‐noise amplifier (LNA) for best‐ in‐class receiver sensitivity, and an internal transmit/receive (iTR) RF switch, reducing the overall solution cost and printed circuit board area. The CYW94343WWCD1_EVB also includes an on‐board STM32F411 32‐bit Arm microcontroller. Kit Features:      The CYW94343WWCD1_EVB is a self‐contained evaluation and debug kit that can be powered from a wired USB (+5V) connection or a 5V DC jack (not provided with the kit) The USB interface enumerates as both a USB‐JTAG (Program and Debug) and USB‐UART (Serial Command Interface) Support for ThreadX and FreeRTOS Real‐Time Operating Systems (RTOS), and NetX/NetXDuo IPv4/IPv6 and LwIP IPv4 TCP/IP network stack implementations via WICED Studio Open On Chip Debugger (Open OCD) Optional external flash for memory expansion Download the WICED™ Studio to work with the CYW94343WWCD1_EVB. Kit Contents: 1 X CYW94343WWCD1_EVB evaluation board, 1 X USB Cable              https://www.cypress.com/documentation/development‐kitsboards/cyw94343wwcd1evb‐evaluation‐and‐development‐kit/3‐11‐19