EMA-MB91F465X-NLS-100M20

Fujitsu Microelectronics Europe User Guide UG910042-13-EMA-MB91F465X-NLS-100M20 FR60 FAMILY SOCKET ADAPTER BOARD EMA-MB91F465X-NLS-100M20 USER GUIDE UG910042-13-EMA-MB91F465X-NLS-100M20 Revision History Date 28.11.2006 02.03.2007 15.03.2007 16.01.2009 Issue V1.00, RH/AW, First Release V1.1 Recycling Note added V1.2 J100 Description added V1.3, CEy Description for EMA-MB91FV460B-001 and functional restrictions added Schematic version: 1.4 PCB version: 1.0 This document contains 15 pages. UG910042-13-EMA-MB91F465X-NLS-100M20 © Fujitsu Microelectronics Europe GmbH -2- UG910042-13-EMA-MB91F465X-NLS-100M20 Warranty and Disclaimer To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the EMA-MB91F465X-NLS-100M20 Board and all its deliverables (eg. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying written materials. In addition, to the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of the Product and any consequential damages in cases of unauthorised decompiling and/or reverse engineering and/or disassembling. Note, the EMA-MB91F465X-NLS-100M20 Board and all its deliverables are intended and must only be used in an evaluation laboratory environment. 1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in accordance with the accompanying written materials for a period of 90 days form the date of receipt by the customer. Concerning the hardware components of the Product, Fujitsu Microelectronics Europe GmbH warrants that the Product will be free from defects in material and workmanship under use and service as specified in the accompanying written materials for a duration of 1 year from the date of receipt by the customer. 2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability and the customer’s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in original packing and without further defects resulting from the customer’s use or the transport. However, this warranty is excluded if the defect has resulted from an accident not attributable to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH. 3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH disclaims all other warranties, whether expressed or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the Product is not designated. 4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s and its supplier’s liability are restricted to intention and gross negligence. NO LIABILITY FOR CONSEQUENTIAL DAMAGES To the maximum extent permitted by applicable law, in no event shall Fujitsu Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever (including but without limitation, consequential and/or indirect damages for personal injury, assets of substantial value, loss of profits, interruption of business operation, loss of information, or any other monetary or pecuniary loss) arising from the use of the Product. Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect © Fujitsu Microelectronics Europe GmbH UG910042-13-EMA-MB91F465X-NLS-100M20 -3- UG910042-13-EMA-MB91F465X-NLS-100M20 0 Contents REVISION HISTORY ............................................................................................................ 2 WARRANTY AND DISCLAIMER ......................................................................................... 3 0 CONTENTS...................................................................................................................... 4 1 OVERVIEW...................................................................................................................... 5 1.1 Abstract................................................................................................................... 5 1.2 General Description................................................................................................. 5 1.3 Functional Restrictions ............................................................................................ 5 2 INSTALLATION ............................................................................................................... 6 3 SWITCHES AND JUMPERS............................................................................................ 7 3.1 Switches and Jumpers overview ............................................................................. 7 3.2 Default Jumper Setting ............................................................................................ 8 3.3 Flexray Control (J200) ........................................................................................... 10 3.4 ADC control (J101 - J105, J201 - J210)................................................................. 10 3.5 External bus / DMA control (J211 - J222) .............................................................. 12 4 MECHANICAL DIMENSIONS........................................................................................ 13 5 INFORMATION IN THE WWW....................................................................................... 14 6 RECYCLING .................................................................................................................. 15 UG910042-13-EMA-MB91F465X-NLS-100M20 © Fujitsu Microelectronics Europe GmbH -4- UG910042-13-EMA-MB91F465X-NLS-100M20 1 Overview 1.1 Abstract The EMA-MB91F465X-NLS-100M20 in combination with the EMA-MB91V460A-002B/80/003 or EMA-MB91FV460B-001 is a development system for the Fujitsu FR60 MB91V460 Flash microcontroller. The development system allows the designer immediately to start with the software development before MB91V460 based silicon samples are available. This board must only be used for test applications in an evaluation laboratory environment. Before using the EMA-MB91F465X-NLS-100M20 adapter board, make sure that the following packed components have been delivered: 1.2 o 1 pcs. EMA-MB91F465X-NLS-100M20 socket adapter board o 1 pcs. YQPACK100SD o 5 pcs. Screw M2x12 o 5 pcs. Washer M2, Nylon o 1 pcs. User Guide General Description The EMA-MB91F465X-NLS-100M20 in combination with the EMA-MB91V460A-002B/80/003 or EMA-MB91FV460B-001 replaces a MB91F465X microcontroller. In both cases you need the extension board EMA-MB91V460A-100 for the emulation of FlexRay functionality. For further details of the EMA-MB91V460A-002B/-80/003 or EMAMB91FV460B-001 board please refer to the User Guide of EMA-MB91V460A-002B/-80/003 or EMA-MB91FV460B-001. In case of EMA-MB91FV460B-001 that has built-in FlexRay support, it is recommended to use the EMA-MB91F460X-100M20 as socket adapter board. 1.3 Functional Restrictions 1.3.1 Valid for EMA-MB91V460A-002B/-80/003 Port P31 (FlexRay signals) cannot be used in GPIO function mode. Furthermore, FlexRay functionality must be emulated via external bus access to extension board EMAMB91V460A-100 1.3.2 Valid for EMA-MB91FV460B-001 Port P31 (FlexRay signals) cannot be used in GPIO function mode. Furthermore, FlexRay functionality must be emulated via external bus access to extension board EMAMB91V460A-100 © Fujitsu Microelectronics Europe GmbH UG910042-13-EMA-MB91F465X-NLS-100M20 -5- UG910042-13-EMA-MB91F465X-NLS-100M20 2 Installation Remove carefully the EMA-MB91F465X-NLS-100M20 board from the shipping carton and check if there are any damages. Please refer to the attached document “NQPACK/ YQPACK/ HQPACK Technical Information” for installation the socket adapter. DSU4 SSRAM, Emulation bus Flash + SRAM Screw M2.5 x 12 MB91V460 Washer M2.5 (Fiber) Connector for extension board EMA-MB91V460A-001 Connector EMA-MB91V460A-001 to YQSOCKET adapter board YQSOCKET adapter board 120,8 mm Target board UG910042-13-EMA-MB91F465X-NLS-100M20 © Fujitsu Microelectronics Europe GmbH -6- UG910042-13-EMA-MB91F465X-NLS-100M20 3 Switches and Jumpers This chapter describes all switches and jumpers that can be modified or accessed on the EMA-MB91F465X-NLS-100M20 board. The default setting is shown with a grey shaded area. 3.1 Switches and Jumpers overview 3.1.1 Flexray Control Jumper Description / Function Default J100 J200 P14_7J source selection P14_7 (FlexRay Stopwatch) pulldown 2-3 Open 3.1.2 ADC control Jumper Description / Function Default J101 J102 J103 J104 J105 J201 J202 J203 J204 J205 J206 J207 J208 J209 J210 P28_0J source selection P28_1J source selection P28_2J source selection P28_3J source selection P28_4J source selection P26_0 pulldown P26_1 pulldown P26_2 pulldown P26_3 pulldown P26_4 pulldown P28_0 pulldown P28_1 pulldown P28_2 pulldown P28_3 pulldown P28_4 pulldown 2-3 2-3 2-3 2-3 2-3 Closed Closed Closed Closed Closed Open Open Open Open Open 3.1.3 External bus / DMA control Jumper Description / Function Default J211 J212 J213 J214 J215 J216 J217 J218 J219 J220 J221 J222 P09_4 (CS4#) pulldown P09_5 (CS5#) pulldown P09_6 (CS6#) pulldown P09_7 (CS7#) pulldown P09_0 (CS0#) pulldown P09_1 (CS1#) pulldown P09_2 (CS2#) pulldown P09_3 (CS3#) pulldown P12_0 (DREQ2) pulldown P12_4 (DREQ3) pulldown P13_0 (DREQ0) pulldown P13_4 (DREQ1) pulldown Closed Closed Closed Closed Closed Closed Closed Open Closed Closed Open Closed © Fujitsu Microelectronics Europe GmbH UG910042-13-EMA-MB91F465X-NLS-100M20 -7- UG910042-13-EMA-MB91F465X-NLS-100M20 3.2 Default Jumper Setting The following jumper setting is the default setting. 3 2 1 J100 Figure 3-1: Jumper default setting, top UG910042-13-EMA-MB91F465X-NLS-100M20 © Fujitsu Microelectronics Europe GmbH -8- UG910042-13-EMA-MB91F465X-NLS-100M20 J200 J215 J216 J217 J218 J222 J221 J220 J219 J211 J212 J213 J214 J104 J105 3 2 1 J103 3 2 1 3 2 1 J102 3 2 1 J205 J208 J101 J201 J204 J209 3 2 1 J203 J202 J207 J210 J206 Figure 3-2: Jumper default setting, bottom © Fujitsu Microelectronics Europe GmbH UG910042-13-EMA-MB91F465X-NLS-100M20 -9- UG910042-13-EMA-MB91F465X-NLS-100M20 3.3 Flexray Control (J200) The jumper J200 controls the FlexRay StopWatch signal pulldown. In MB91F465XA series P14_7 is also shared with Stop Watch function of the FlexRay communication controller. This function is not available on the MB91V460A series, but on MB88121B series at the FlexRay extension board (EMA-MB91V460A-100). Jumper J100 selects if P14_7 (MB91V460A port) is connected to the pin 91 (position 2-3) or Stop watch function (MB88121B port) is connected to the pin 91 (position 1-2). Jumper Setting J100 (P14_7J source selection) 1-2 P14_7J is connected to FRA_BGE 2-3 P14_7J is connected to P14_7 J200 (P14_7 - FlexRay Open Stopwatch) Closed Description No pulldown Pulldown Default: J100: 2-3 J200: open 3.4 ADC control (J101 - J105, J201 - J210) Jumper Setting J101 (P28_0J source selection) 1-2 P28_0J is connected to P26_0 2-3 P28_0J is connected to P28_0 J102 (P28_1J source selection) 1-2 P28_1J is connected to P26_1 2-3 P28_1J is connected to P28_1 J103 (P28_2J source selection) 1-2 P28_2J is connected to P26_2 2-3 P28_2J is connected to P28_2 J104 (P28_3J source selection) 1-2 P28_3J is connected to P26_3 2-3 P28_3J is connected to P28_3 J105 (P28_4J source selection) 1-2 P28_4J is connected to P26_4 2-3 P28_4J is connected to P28_4 J201 (P26_0) Open Closed Open J202 (P26_1) Closed J203 Open (P26_2) Closed Description No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown UG910042-13-EMA-MB91F465X-NLS-100M20 © Fujitsu Microelectronics Europe GmbH - 10 - UG910042-13-EMA-MB91F465X-NLS-100M20 J204 Open (P26_3) Closed J205 Open (P26_4) Closed J206 Open (P28_0) Closed J207 Open (P28_1) Closed J208 Open (P28_2) Closed J209 Open (P28_3) Closed J210 Open (P28_4) Closed No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown Default: J101 – J105: 2-3 J201 - J205: Open J206 - J210: Closed © Fujitsu Microelectronics Europe GmbH UG910042-13-EMA-MB91F465X-NLS-100M20 - 11 - UG910042-13-EMA-MB91F465X-NLS-100M20 3.5 External bus / DMA control (J211 - J222) Jumper Setting Description J211 (P09_4 - CS4#) Open No pulldown J212 (P09_5 – CS5#) J213 (P09_6 – CS6#) Closed Open Closed Open Closed Open J214 (P09_7 – CS7#) Closed J215 Open (P09_0 – CS0#) Closed J216 Open (P09_1 – CS1#) Closed J217 Open (P09_2 – CS2#) Closed J218 Open (P09_3 – CS3#) Closed J219 Open (P12_0 – DREQ2) Closed J220 Open (P12_4 – DREQ3) Closed J221 Open (P13_0 – DREQ0) Closed J222 Open (P13_4 – DREQ1) Closed Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown No pulldown Pulldown Default: J211 – J217, J219 – J220, J222: Closed J218, J221: Open UG910042-13-EMA-MB91F465X-NLS-100M20 © Fujitsu Microelectronics Europe GmbH - 12 - UG910042-13-EMA-MB91F465X-NLS-100M20 4 Mechanical dimensions 33 mm Top view 71 mm Pin1 33 mm YQ Socket 66 mm 29mm EMA-MB91V460A-001 EMA-MB91F465X-NLS-100M20 14mm YQSOCKET / YQPACK / NQPACK (socket dimension depends on socket type) Target board 25 mm © Fujitsu Microelectronics Europe GmbH UG910042-13-EMA-MB91F465X-NLS-100M20 - 13 - UG910042-13-EMA-MB91F465X-NLS-100M20 5 Information in the WWW Information about FUJITSU MICROELECTRONICS Products can be found on the following Internet pages: Microcontrollers (8-, 16- and 32bit), Graphics Controllers Datasheets and Hardware Manuals, Support Tools (Hard- and Software) http://mcu.emea.fujitsu.com/mcu_portal.htm Linear Products: Power Management, A/D and D/A Converters http://www.fujitsu.com/emea/services/microelectronics Media Products: SAW filters, acoustic resonators and VCOs http://www.fujitsu.com/emea/services/microelectronics/saw For more information about FUJITUS MICROELECTRONICS http://www.fujitsu.com/emea/services/microelectronics UG910042-13-EMA-MB91F465X-NLS-100M20 © Fujitsu Microelectronics Europe GmbH - 14 - UG910042-13-EMA-MB91F465X-NLS-100M20 6 Recycling Gültig für EU-Länder: Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische Gesetze nehmen wir dieses Gerät wieder zurück. Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a 63225 Langen Valid for European Union Countries: According to the European WEEE-Directive and its implementation into national laws we take this device back. For disposal please send the device to the following address: Fujitsu Microelectronics Europe GmbH Warehouse/Disposal Monzastraße 4a 63225 Langen © Fujitsu Microelectronics Europe GmbH UG910042-13-EMA-MB91F465X-NLS-100M20 - 15 -