EMA-MB91F467B-LS144M08B

Fujitsu Microelectronics Europe User Guide FMEMCU-UG-910059-14 FR60 FAMILY SOCKET ADAPTER BOARD EMA-MB91F467B-LS144M08B USER GUIDE EMA-MB91F467B-LS144M08B Revision History Revision History Date 09.07.2007 11.07.2007 09.04.2008 16.09.2008 31.10.2008 16.01.2009 Issue V1.00, RH/AW/MB, First Release, based on UG-910035-10-EMA-MB91F467B-LS144M08 WR1# signal added V1.1, MB, Corrections from UG-910059-10-EMA-MB91F467B-LS144M08B-corr-x1-00.pdf added V1.2, China RoHS note added, CPLD code updated, SDRAM removed V1.2, MSc, China-RoHS regulation added V1.3, CEy Please note the version conflict of V1.2. Merged both versions Restored missing pictures V1.4, CEy Description for EMA-MB91FV460B-001 added Latest product revision: 1.1 Schematic version: 1.1 PCB version: 1.0 CPLD version : BB11 This document contains 22 pages. FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH -2- EMA-MB91F467B-LS144M08B Warranty and Disclaimer Warranty and Disclaimer To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH restricts its warranties and its liability for the EMA-MB91F467B-LS144M08B Board and all its deliverables (e.g. software include or header files, application examples, target boards, evaluation boards, engineering samples of IC’s etc.), its performance and any consequential damages, on the use of the Product in accordance with (i) the terms of the License Agreement and the Sale and Purchase Agreement under which agreements the Product has been delivered, (ii) the technical descriptions and (iii) all accompanying written materials. In addition, to the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH disclaims all warranties and liabilities for the performance of the Product and any consequential damages in cases of unauthorised decompiling and/or reverse engineering and/or disassembling. Note, the EMA-MB91F467B-LS144M08B Board and all its deliverables are intended and must only be used in an evaluation laboratory environment. 1. Fujitsu Microelectronics Europe GmbH warrants that the Product will perform substantially in accordance with the accompanying written materials for a period of 90 days form the date of receipt by the customer. Concerning the hardware components of the Product, Fujitsu Microelectronics Europe GmbH warrants that the Product will be free from defects in material and workmanship under use and service as specified in the accompanying written materials for a duration of 1 year from the date of receipt by the customer. 2. Should a Product turn out to be defect, Fujitsu Microelectronics Europe GmbH´s entire liability and the customer’s exclusive remedy shall be, at Fujitsu Microelectronics Europe GmbH´s sole discretion, either return of the purchase price and the license fee, or replacement of the Product or parts thereof, if the Product is returned to Fujitsu Microelectronics Europe GmbH in original packing and without further defects resulting from the customer’s use or the transport. However, this warranty is excluded if the defect has resulted from an accident not attributable to Fujitsu Microelectronics Europe GmbH, or abuse or misapplication attributable to the customer or any other third party not relating to Fujitsu Microelectronics Europe GmbH. 3. To the maximum extent permitted by applicable law Fujitsu Microelectronics Europe GmbH disclaims all other warranties, whether expressed or implied, in particular, but not limited to, warranties of merchantability and fitness for a particular purpose for which the Product is not designated. 4. To the maximum extent permitted by applicable law, Fujitsu Microelectronics Europe GmbH´s and its supplier’s liability are restricted to intention and gross negligence. NO LIABILITY FOR CONSEQUENTIAL DAMAGES To the maximum extent permitted by applicable law, in no event shall Fujitsu Microelectronics Europe GmbH and its suppliers be liable for any damages whatsoever (including but without limitation, consequential and/or indirect damages for personal injury, assets of substantial value, loss of profits, interruption of business operation, loss of information, or any other monetary or pecuniary loss) arising from the use of the Product. Should one of the above stipulations be or become invalid and/or unenforceable, the remaining stipulations shall stay in full effect © Fujitsu Microelectronics Europe GmbH FMEMCU-UG-910059-14 -3- EMA-MB91F467B-LS144M08B Contents 0 Contents REVISION HISTORY ............................................................................................................ 2 WARRANTY AND DISCLAIMER ......................................................................................... 3 0 CONTENTS...................................................................................................................... 4 1 OVERVIEW...................................................................................................................... 5 1.1 Abstract................................................................................................................... 5 1.2 General Description................................................................................................. 6 1.3 Functional Restrictions ............................................................................................ 7 1.3.1 Valid for EMA-MB91V460A-002B/-80/003 and EMA-MB91FV460B-001.... 7 2 INSTALLATION ............................................................................................................... 8 3 SWITCHES AND JUMPERS............................................................................................ 9 3.1 Switches and Jumpers overview ............................................................................. 9 3.2 Default Jumper Setting .......................................................................................... 10 3.3 MONCLK select (S400-10).................................................................................... 12 3.4 Level-shifter direction control jumper ..................................................................... 12 3.5 Bus control jumpers............................................................................................... 12 3.5.1 WR1# (P08_1)......................................................................................... 12 3.5.2 CS0# (P09_0).......................................................................................... 12 3.5.3 CS1# (P09_1).......................................................................................... 13 3.5.4 SYSCLK (P10_0)..................................................................................... 13 3.5.5 WR0# (P08_0)......................................................................................... 13 3.5.6 RD# (P08_4)............................................................................................ 13 3.5.7 RDY (P08_7) ........................................................................................... 13 4 CPLD ............................................................................................................................. 14 4.1 CPLD Verilog Code ............................................................................................... 14 4.2 CPLD Constraints.................................................................................................. 16 4.3 CS# select (CPLD revision BB11) ......................................................................... 17 4.4 CPLD programming jumper (J491) ........................................................................ 17 5 MECHANICAL DIMENSIONS........................................................................................ 18 6 INFORMATION IN THE WWW....................................................................................... 19 7 CHINA-ROHS REGULATION ........................................................................................ 20 8 RECYCLING .................................................................................................................. 22 FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH -4- EMA-MB91F467B-LS144M08B Chapter 1: Overview 1 Overview 1.1 Abstract The EMA-MB91F467B-LS144M08B in combination with the EMA-MB91V460A-002B/80/003 or EMA-MB91FV460B-001 is a development system for the Fujitsu FR60 MB91V460 Flash microcontroller. The EMA-MB91F467B-LS144M08B is an adapter board with level shifters to support the MB91V460A external bus interface at 3.3V levels. The development system allows the designer immediately to start with the software development before MB91V460 based silicon samples are available. This board must only be used for test applications in an evaluation laboratory environment. Before using the EMA-MB91F467B-LS144M08B adapter board, make sure that the following packed components have been delivered: o 1 pcs. EMA-MB91F467B-LS144M08B socket adapter board o 1 pcs. YQPACK144SD o 5 pcs. Screw M2x12 o 5 pcs. Washer M2, Nylon o 1 pcs. User Guide © Fujitsu Microelectronics Europe GmbH FMEMCU-UG-910059-14 -5- EMA-MB91F467B-LS144M08B Chapter 1: Overview 1.2 General Description The EMA-MB91F467B-LS144M08B in combination with the EMA-MB91V460A-002B/80/003 or EMA-MB91FV460B-001 replaces a MB91F467B microcontroller. For further details of the EMA-MB91V460A-002B/-80/003 or EMA-MB91FV460B-001 board please refer to the User Guide of the EMA-MB91V460A-002B/-80/003 or EMA-MB91FV460B-001. Figure 1-1: System overview FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH -6- EMA-MB91F467B-LS144M08B Chapter 1: Overview 1.3 Functional Restrictions 1.3.1 Valid for EMA-MB91V460A-002B/-80/003 and EMA-MB91FV460B-001 This probe cable can only be used for the following Microcontroller configuration: 1. VDD5 = 5V, VDD35 = 3.3V, MD3 = 1 The following Microcontroller configurations (2 & 3) are applicable with this probe cable, but it is recommended to use the appropriate MCU “NLS” probe cable! 2. VDD5 = 5V, VDD35 = 5V, MD3 = 1 3. VDD5 = 3.3V, VDD35 = 3.3V, MD3 = 1 While using this probe cable, the GPIO functionality on the external bus interface (VDD35 voltage domain) is restricted! Unused external bus function pins (e.g. address lines) cannot be configured as general purpose in- or output randomly! The following ports can be configured as permanent general purpose input OR output. 1. P07[0..7] 2. P06[0..7] 3. P05[0..7] It is only possible to configure the whole port as input OR output! Configuring each pin of these ports separately as input or output is not applicable! For details on how to configure the port input and output direction please see chapter 3.4 Level-shifter direction control jumper! © Fujitsu Microelectronics Europe GmbH FMEMCU-UG-910059-14 -7- EMA-MB91F467B-LS144M08B Chapter 2: Installation 2 Installation Remove carefully the EMA-MB91F467B-LS144M08B board from the shipping carton and check if there are any damages. Please refer to the attached document “NQPACK/ YQPACK/ HQPACK Technical Information” for installation the socket adapter. Screw M2.5 x 12 (optional) DSU4 SSRAM, Emulation bus Flash + SRAM MB91V460 Washer M2.5 (Fiber) (optional) Connector for extension board EMA-MB91V460A-002B/-80/003 Connector EMA-MB91V460A-002B/-80/003 to EMA-MB91F467B-LS144M08B YQSOCKET144SDN EMA-MB91FF467B-LS144M08B 120,8 mm YQPACK144SD NQPACK / CSPACK NQPACK144SD Target board Figure 2-1: Installation FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH -8- EMA-MB91F467B-LS144M08B Chapter 3: Switches and Jumpers 3 Switches and Jumpers This chapter describes all switches and jumpers that can be modified or accessed on the EMA-MB91F467B-LS144M08B board. The default setting is shown with a grey shaded area. 3.1 Switches and Jumpers overview Jumper Description/ Function Type Default S400-1 S400-2 S400-3 S400-4 S400-5 S400-6 S400-7 S400-8 S400-9 S400-10 S401-1 S401-2 S401-10 R416 R417 R423 R447 R448 R450 R449 DIR_U406 DIR_U407 DIR_U408 P08_1 WR1# P09_0 CS0# P09_1 CS1# P10_0 SYSCLK P08_0 WR0# P08_4 RD# P08_7 RDY CS select DIP-Switch DIP-Switch DIP-Switch DIP-Switch DIP-Switch DIP-Switch DIP-Switch DIP-Switch DIP-Switch DIP-Switch DIP-Switch DIP-Switch DIP-Switch 0603 0603 0603 0603 0603 0603 0603 OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF OFF ON OFF Closed Closed Closed Closed Closed Closed Closed MONCLK P09_0 CS0# P09_1 CS1# P08_7 RDY P10_0 SYSCLK P08_0 WR0# P08_1 WR1# P08_4 RD# © Fujitsu Microelectronics Europe GmbH FMEMCU-UG-910059-14 -9- EMA-MB91F467B-LS144M08B Chapter 3: Switches and Jumpers 3.2 Default Jumper Setting The following jumper setting is the default setting. J800 6 5 4 3 2 1 J803 J802 J491 J801 Figure 3-1: Jumper default setting, top FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH - 10 - EMA-MB91F467B-LS144M08B Chapter 3: Switches and Jumpers 1 10 R447 S400 ON R423 R449 1 ON 10 R448 R417 R416 S401 Figure 3-2: Jumper location, bottom © Fujitsu Microelectronics Europe GmbH FMEMCU-UG-910059-14 - 11 - EMA-MB91F467B-LS144M08B Chapter 3: Switches and Jumpers 3.3 MONCLK select (S400-10) Swicth Setting Description S400-10 (MONCLK) OFF No connection ON MONCLK signal connected to the socket Default: OFF 3.4 Level-shifter direction control jumper Jumper Setting S400-1 (Direction U406) ON Target board A[0..7] MB91V460 A[0..7] OFF Target board A[0..7] MB91V460 A[0..7] ON Target board A[8..15] MB91V460 A[8..15] OFF Target board A[8..15] MB91V460 A[8..15] ON Target board A[16..23] MB91V460 A[16..23] OFF Target board A[16..23] MB91V460 A[16..23] S400-2 (Direction U407) S400-3 (Direction U408) Description Default: S400-1, S400-2, S400-3: OFF 3.5 Bus control jumpers 3.5.1 WR1# (P08_1) R450 S400-8 Description Closed OFF P08_1 WR1# Open ON P08_1 WR1# Closed ON Prohibited Default: R450: Closed, S400-4: OFF 3.5.2 CS0# (P09_0) R416 S400-5 Description Closed OFF P09_0 CS0# Open ON P09_0 CS0# Closed ON Prohibited Default: R416: Closed, S400-5: OFF FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH - 12 - EMA-MB91F467B-LS144M08B Chapter 3: Switches and Jumpers 3.5.3 CS1# (P09_1) R417 S400-6 Description Closed OFF P09_1 CS1# Open ON P09_1 CS1# Closed ON Prohibited Default: R417: Closed, S400-6: OFF 3.5.4 SYSCLK (P10_0) R447 S400-7 Description Closed OFF P10_0 SYSCLK Open ON P10_0 SYSCLK Closed ON Prohibited Default: R447: Closed, S400-7: OFF 3.5.5 WR0# (P08_0) R448 S400-8 Description Closed OFF P08_0 WR0# Open ON P08_0 WR0# Closed ON Prohibited Default: R448: Closed, S400-8: OFF 3.5.6 RD# (P08_4) R449 S400-9 Description Closed OFF P08_4 RD# Open ON P08_4 RD# Closed ON Prohibited Default: R449: Closed, S400-9: OFF 3.5.7 RDY (P08_7) R423 S400-10 Description Closed OFF P08_7 RDY Open ON P08_7 RDY Closed ON Prohibited Default: R423: Closed, S400-10: OFF © Fujitsu Microelectronics Europe GmbH FMEMCU-UG-910059-14 - 13 - EMA-MB91F467B-LS144M08B Chapter 4: CPLD 4 CPLD The CPLD Xilinx XC9536XL-5VQL44C controls the direction of the data bus. 4.1 CPLD Verilog Code `timescale 1ns / 1ps /////////////////////////////////////////////////////////////////////////// // Company: Accemic GmbH & Co. KG // Engineer: RH / AW // // Create Date: 26/07/2007 // Design Name: EMA-MB91F467B-LS144M08B // Module Name: F467BB // Project Name: // Target Devices: XC9536XL-5VQ44 // Tool versions: ISE 9.2 // Description: // // Dependencies: // // Revision: // Revision 1.1 // Additional Comments: // // USERCODE: BB11 // ||||____ Subversion // |||_____ Version // ||______ Target 467BB // ** // /////////////////////////////////////////////////////////////////////////// module EMA_MB91F467B_LS_144M08B_V10_cpld_BB11( ECSx, CSx, // P09_7..P09_0 WRx, // P08_3..P08_0 RDx, // P08_4 ASx, // P10_1 BAAx, // P10_2 WEx, // P10_3 IORDx, // P11_0 IOWRx, // P11_1 S401, DIR_U400, DIR_U401, DIR_U404, DIR_U405, OEx_U400_U401, OEx_U404_U405); FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH - 14 - EMA-MB91F467B-LS144M08B Chapter 4: CPLD input ECSx; input[7:0] CSx; input[3:0] WRx; input RDx; input ASx; input BAAx; input WEx; input IORDx; input IOWRx; input[7:1] S401; output DIR_U400; output DIR_U401; output DIR_U404; output DIR_U405; output OEx_U400_U401; output OEx_U404_U405; reg OEx_U400_U401, OEx_U404_U405; reg DIR_U400, DIR_U401, DIR_U404, DIR_U405; always @* begin case (S401[2:1]) 2'b11: 2'b10: default: // CS_MASK; // CS0 OEx_U404_U405 = // CS1 OEx_U404_U405 = // none masked OEx_U404_U405 = !ECSx | CSx[1]; !ECSx | CSx[0]; !ECSx | (CSx[0] & CSx[1]); endcase OEx_U400_U401 = 1; // check DIR_U400 DIR_U401 DIR_U404 DIR_U405 schematic for DIR level (different on LS boards) = 1; = 1; = RDx; = RDx; end endmodule © Fujitsu Microelectronics Europe GmbH FMEMCU-UG-910059-14 - 15 - EMA-MB91F467B-LS144M08B Chapter 4: CPLD 4.2 NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET NET CPLD Constraints "ASx" LOC = "P13" ; "BAAx" LOC = "P14" ; "CSx" LOC = "P2" ; "CSx" LOC = "P1" ; "CSx" LOC = "P3" ; "CSx" LOC = "P5" ; "CSx" LOC = "P6" ; "CSx" LOC = "P7" ; "CSx" LOC = "P8" ; "CSx" LOC = "P12" ; "DIR_U400" LOC = "P39" | SLEW "DIR_U401" LOC = "P38" | SLEW "DIR_U404" LOC = "P36" | SLEW "DIR_U405" LOC = "P37" | SLEW "ECSx" LOC = "P32" ; "IORDx" LOC = "P18" ; "IOWRx" LOC = "P19" ; "OEx_U400_U401" LOC = "P34" | "OEx_U404_U405" LOC = "P33" | "RDx" LOC = "P44" ; "S401" LOC = "P31" ; "S401" LOC = "P30" ; "S401" LOC = "P29" ; "S401" LOC = "P28" ; "S401" LOC = "P27" ; "S401" LOC = "P23" ; "S401" LOC = "P22" ; "WEx" LOC = "P16" ; "WRx" LOC = "P40" ; "WRx" LOC = "P41" ; "WRx" LOC = "P43" ; "WRx" LOC = "P42" ; = = = = FAST FAST FAST FAST ; ; ; ; SLEW = FAST ; SLEW = FAST ; FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH - 16 - EMA-MB91F467B-LS144M08B Chapter 4: CPLD 4.3 CS# select (CPLD revision BB11) Chip select signals, selected by S401-2..1, will not be routed towards the target hardware! For applications with extension board EMA-MB91V460A-300 or equivalent extension boards, please select and set the corresponding chip select signal (CSx) used for the extension board! Please also refer to the user guide of the extension board and to the settings on the extension board itself. E.g. if the EMA-MB91V460A-300 is configured to use chip select CS1, please set S401-2..1 on EMA-MB91F467B-LS144M08B to CS1 (OFF, ON)! In default setting all chip select signals are routed to the target hardware. S401-2 S401-1 Description OFF OFF CS0# is selected OFF ON CS1# is selected ON Don’t care None selected Default: S401-2: ON 4.4 CPLD programming jumper (J491) The CPLD is re-configurable by programming via J491. Please refer to www.xilinx.com for details and tools for Xilinx CPLD configuration. J491 pin Name 1 2 3 4 5 6 GND TDO TCK TMS TDI VREF © Fujitsu Microelectronics Europe GmbH FMEMCU-UG-910059-14 - 17 - EMA-MB91F467B-LS144M08B Chapter 5: Mechanical dimensions 5 Mechanical dimensions Figure 5-1: Mechanical dimensions FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH - 18 - EMA-MB91F467B-LS144M08B Chapter 6: Information in the WWW 6 Information in the WWW Information about FUJITSU MICROELECTRONICS Products can be found on the following Internet pages: Microcontrollers (8-, 16- and 32bit), Graphics Controllers Datasheets and Hardware Manuals, Support Tools (Hard- and Software) http://mcu.emea.fujitsu.com/mcu_portal.htm Linear Products: Power Management, A/D and D/A Converters http://www.fujitsu.com/emea/services/microelectronics Media Products: SAW filters, acoustic resonators and VCOs http://www.fujitsu.com/emea/services/microelectronics/saw For more information about FUJITUS MICROELECTRONICS http://www.fujitsu.com/emea/services/microelectronics © Fujitsu Microelectronics Europe GmbH FMEMCU-UG-910059-14 - 19 - EMA-MB91F467B-LS144M08B Chapter 7: China-RoHS regulation 7 China-RoHS regulation Evaluation Board 评估板 Emulation Board 仿真板 根据SJ/T113642006《电子信息产品污染控制标识要求》特提供如下有关污染控制方面的信息。 The following product pollution control information is provided according to SJ/T11364-2006 Marking for Control of Pollution caused by Electronic Information Products. 1．电子信息产品污染控制标志说明 Explanation of Pollution Control Label 该标志表明本产品含有超过中国标准SJ/T113632006《电子信息产品中有毒有害物质的限量要求》中限量的有毒有害物质。标志中的数字为 本产品的环保使用期，表明本产品在正常使用的条件下，有毒有害物质不会发生外泄或突变， 用户使用本产品不会对环境造成严重污染或对其人身、财产造成严重损害的期限，单位为年。 为保证所申明的环保使用期限，应按产品手册中所规定的环境条件和方法进行正常使用，并严 格遵守产品维修手册中规定的定期维修和保养要求。 产品中的消耗件和某些零部件可能有其单独的环保使用期限标志，并且其环保使用期限有可能 比整个产品本身的环保使用期限短。应到期按产品维修程序更换那些消耗件和零部件，以保证 所申明的整个产品的环保使用期限。 本产品在使用寿命结束时不可作为普通生活垃圾处理，应被单独收集妥善处理。 请注意：环保使用期限50年的指定不是与产品的耐久力，使用期限或任何担保要求等同的。 This symbol to be added to all EIO sold to China, indicates the product contains hazardous materials in excess of the limits established by the Chinese standard SJ/T11363-2006 Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products. The number in the symbol is the Environment-friendly Use Period (EFUP), which indicates the period, starting from the manufacturing date, during which the toxic or hazardous substances or elements contained in electronic information products will not leak or mutate under normal operating conditions so that the use of such electronic information products will not result in any severe environmental pollution, any bodily injury or damage to any assets, the unit of the period is “Year”. FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH - 20 - EMA-MB91F467B-LS144M08B Chapter 7: China-RoHS regulation In order to maintain the declared EFUP, the product shall be operated normally according to the instructions and environmental conditions as defined in the product manual, and periodic maintenance schedules specified in Product Maintenance Procedures shall be followed strictly. Consumables or certain parts may have their own label with an EFUP value less than the product. Periodic replacement of those consumables or parts to maintain the declared EFUP shall be done in accordance with the Product Maintenance Procedures. This product must not be disposed of as unsorted municipal waste, and must be collected separately and handled properly after decommissioning. Please note: The designation of 10 years EFUP is not to be equated with the durability, useduration or any warranty-claims of the product. 产品中有毒有害物质或元素的名称及含量 Table of hazardous substances name and concentration 有毒有害物质或元素 部件名称 EMA-MB91F467BLS144M08B Hazardous substances name 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (Cr(VI)) (PBB) (PBDE) x o o o o o O: 表示该有毒有害物质在该部件所有均质材料中的含量均在SJ/T11363-2006 标准规定的限量要求以下 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出SJ/T11363-2006 标准规定的限量要求 • 此表所列数据为发布时所能获得的最佳信息 • 由于缺少经济上或技术上合理可行的替代物质或方案，此医疗设备运用以上一些有毒有害物质来实现设备的预期 临床功能，或给人员或环境提供更好的保护效果。 O: Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T11363-2006. X: Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T11363-2006. • Data listed in the table represents best information available at the time of publication © Fujitsu Microelectronics Europe GmbH FMEMCU-UG-910059-14 - 21 - EMA-MB91F467B-LS144M08B Chapter 8: Recycling 8 Recycling Gültig für EU-Länder: Gemäß der Europäischen WEEE-Richtlinie und deren Umsetzung in landesspezifische Gesetze nehmen wir dieses Gerät wieder zurück. Zur Entsorgung schicken Sie das Gerät bitte an die folgende Adresse: Fujitsu Microelectronics Europe GmbH Warehouse Monzastraße 4a 63225 Langen Valid for European Union Countries: According to the European WEEE-Directive and its implementation into national laws we take this device back. For disposal please send the device to the following address: Fujitsu Microelectronics Europe GmbH Warehouse Monzastraße 4a 63225 Langen FMEMCU-UG-910059-14 © Fujitsu Microelectronics Europe GmbH - 22 -