ESD114U102ELE6327XTMA1

Protection Device TVS (Transient Voltage Suppressor) ESD114-U1-02 Series Uni-directional, 5.3 V, 0.4 pF, 0402, 0201, RoHS and Halogen Free compliant ESD114-U1-02ELS ESD114-U1-02EL Data Sheet Revision 1.0, 2014-10-30 Final Power Management & Multimarket Edition 2014-10-30 Published by Infineon Technologies AG 81726 Munich, Germany © 2014 Infineon Technologies AG All Rights Reserved. Legal Disclaimer The information given in this document shall in no event be regarded as a guarantee of conditions or characteristics. With respect to any examples or hints given herein, any typical values stated herein and/or any information regarding the application of the device, Infineon Technologies hereby disclaims any and all warranties and liabilities of any kind, including without limitation, warranties of non-infringement of intellectual property rights of any third party. Information For further information on technology, delivery terms and conditions and prices, please contact the nearest Infineon Technologies Office (www.infineon.com) Warnings Due to technical requirements, components may contain dangerous substances. For information on the types in question, please contact the nearest Infineon Technologies Office. Infineon Technologies components may be used in life-support devices or systems only with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. ESD114-U1-02 Series Product Overview 1 Product Overview 1.1 Features • • • • • • • ESD / Transient protection of high speed data lines exceeding – IEC61000-4-2 (ESD): ±20 kV (contact) – IEC61000-4-4 (EFT): ±2 kV / ±40 A (5/50 ns) – IEC61000-4-5 (surge): ±3 A (8/20 μs) Maximum working voltage: VRWM = ±5.3 V Ultra low capacitance: CL = 0.4 pF (typical) Very low clamping voltage VCL = +20 / -15 V (typical) at ITLP = 16 A Low dynamic resistance RDYN = 0.5 Ω (typical) Very small form factor down to 0.62 x 0.32 x 0.31 mm3 Pb-free (RoHS compliant) and halogen free package 1.2 • • Application Examples USB 2.0, Mobile HDMI Link, MDDI, MIPI, etc. HDMI, DisplayPort, DVI, Ethernet, Firewire, S-ATA 1.3 Product Description Pin 1 Pin 1 Pin 1 marking (lasered) Pin 2 Pin 2 a) Pin configuration b) Schematic diagram Single _Die_diode_PinConf_and_SchematicDiag.vst .vsd Figure 1 Pin Configuration and Schematic Diagram Table 1 Ordering Information Type Package Configuration Marking code ESD114-U1-02ELS TSSLP-2-3 1 line, uni-directional K ESD114-U1-02EL TSLP-2-19 1 line, uni-directional K FinalData Sheet 4 Revision 1.0, 2014-10-30 ESD114-U1-02 Series Maximum Ratings 2 Maximum Ratings Table 2 Maximum Ratings at TA = 25 °C, unless otherwise specified Parameter Symbol 1) Values Unit VESD ±20 kV IPP ±3 A Operating temperature range TOP -55 to 125 °C Storage temperature 1) VESD according to IEC61000-4-2 Tstg -65 to 150 °C ESD contact discharge Peak pulse current (tp = 8/20 μs) 2) 2) Non-repetitive current pulse 8/20µs exponential decay waveform according to IEC61000-4-5 Attention: Stresses above the max. values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings; exceeding only one of these values may cause irreversible damage to the integrated circuit. 3 Electrical Characteristics at TA = 25 °C, unless otherwise specified     
   
         





    
  
      Figure 2

  

 %&  
 ' &(
'
 &) 
  ' ')        !"  !!# $   Definitions of Electrical Characteristics FinalData Sheet 5 Revision 1.0, 2014-10-30 ESD114-U1-02 Series Electrical Characteristics at TA = 25 °C, unless otherwise specified Table 3 DC Characteristics at TA = 25 °C, unless otherwise specified Parameter Symbol Reverse working voltage VRWM Values Unit Note / Test Condition Min. Typ. Max. – – 5.3 V Pin 1 to Pin 2 Breakdown voltage VBR 6 – – V IBR = 1 mA, from Pin 1 to Pin 2 Reverse current IR –