ESD123B2W0201E6327XTSA1

ESD123-B2-W0201 Two-line, bi-directional TVS device, 5.5 V, 0.23 pF, 0201 Product description Infineon transient voltage suppressor (TVS) device array for differential data lines with bi-directional and symmetric I/V characteristic for optimized performance and assembly. Feature list • • • • • • ESD / transient protection according to: - IEC61000-4-2 (ESD): ±25 kV (air) / ±25 kV (contact) - IEC61000-4-4 (EFT): ±2 kV / ±40 A (5/50 ns) - IEC61000-4-5 (Surge): ±3 A (8/20 μs) Bi-directional maximum working voltage: VWM = ±5.5 V Line capacitance: CL = 0.23 pF at f = 1 MHz Clamping voltage: Vcl = 15 V at ITLP = 16 A with Rdyn = 0.47 Ω Very low leakage current: IL =0.1 nA Small form factor SMD size 0201, low profile (0.58 x 0.28 x 0.15 mm³) Potential applications Tailored for ESD protection and capacitance sensitive applications like: • USB 2.0, USB 3.x Gen1/Gen2, USB-C D+/D- and SuperSpeed Tx/Rx lines • HDMI, DisplayPort Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Device information 1 A 2 3 A 1 Figure 1 Table 1 2 3 Pin configuration with marking (bottom view) Part information Product name / Ordering code Package Pin configuration Marking Pieces / Reel ESD123-B2-W0201/ ESD123B2W0201E6327XTSA1 WLL-3-1 A Final datasheet www.infineon.com 2 line, bi-directional Please read the Important Notice and Warnings at the end of this document 15 k v1.0 2020-08-12 ESD123-B2-W0201 Two-line, bi-directional TVS device, 5.5 V, 0.23 pF, 0201 Table of contents Table of contents Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Feature list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Device information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Typical characteristic diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Package information WLL-3-1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Final datasheet 2 v1.0 2020-08-12 ESD123-B2-W0201 Two-line, bi-directional TVS device, 5.5 V, 0.23 pF, 0201 1 Absolute maximum ratings 1 Absolute maximum ratings Table 2 Absolute maximum ratings at TA = 25°C, unless otherwise specified Parameter Symbol Values Min. Unit Note or test condition Max. Working voltage VWM -5.5 +5.5 V ESD discharge voltage VESD (contact) -25 +25 kV VESD (air) -25 +25 Discharge network: R = 330 Ω, C = 150 pF 1) Peak pulse power PPK – 29 W Peak pulse current IPP -3 +3 A Stress pulse: 8/20 μs current waveform 2) Operating temperature Top -55 +125 °C Storage temperature Tstg -65 +150 Attention: Stresses above the maximum values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings. Exceeding only one of these values may cause irreversible damage to the component. 1 2 Based on IEC61000-4-2. Based on IEC61000-4-5. Final datasheet 3 v1.0 2020-08-12 ESD123-B2-W0201 Two-line, bi-directional TVS device, 5.5 V, 0.23 pF, 0201 2 Electrical characteristics 2 Note: Electrical characteristics TA = 25°C, unless otherwise specified. Device is electrically symmetrical. All electrical parameters and all maximum ratings valid with middle pad connected to ground. I ITLP or IPP I It Vcl Vtr Vh VWM IL IL VWM Vh Vtr Vcl V It ΔI Rdyn = ΔV ΔI ΔV ITLP or IPP Figure 2 I/V characteristic curve Table 3 I/V characteristic parameters Symbol Parameter Ih Holding current IL Leakage current IPP Peak pulse current, based on IEC61000-4-5 It Test current ITLP TLP current Rdyn Dynamic resistance Vcl Clamping voltage Vh Holding voltage Vt Test voltage Vtr Trigger voltage VWM Maximum working voltage Final datasheet 4 v1.0 2020-08-12 ESD123-B2-W0201 Two-line, bi-directional TVS device, 5.5 V, 0.23 pF, 0201 2 Electrical characteristics Table 4 DC characteristics Parameter Symbol Values Min. Unit Note or test condition Typ. Max. Trigger voltage 3) Vtr – 9.5 12.5 Holding voltage Vh 6.1 7.5 9 Leakage current IL – 0.1 20 Table 5 Symbol Values Min. Line capacitance CL Series inductance LS Dynamic resistance 4) 5 Max. – 0.23 0.3 – 0.23 – –