ESD129B1W01005E6327XTSA1

ESD129-B1-W01005 Bi-directional ESD protection device, 18 V (AC), 13 V (DC), 0.3 pF, 01005 Product description This Infineon ESD (electrostatic discharge) protection device has a bi-directional and symmetric I/V characteristic and excellent clamping performance. Feature list • • • • • • ESD / transient protection according to: - IEC61000-4-2 (ESD): ±15 kV (air) / ±15 kV (contact) - IEC61000-4-4 (EFT): ±2 kV / ±40 A (5/50 ns) - IEC61000-4-5 (Surge): ±2 A (8/20 μs) Bi-directional maximum working voltage: VWM = ±18 V (AC), ± 13 V (DC) Line capacitance: CL = 0.3 pF at f = 1 MHz Clamping voltage: Vcl = 32 V at ITLP = 16 A with Rdyn = 0.82 Ω Very low leakage current: IL =1 nA Small form factor SMD size 01005, low profile (0.43 x 0.23 x 0.15 mm³) Potential applications • • Near-field communication (NFC) antenna RF antenna Product validation Qualified for industrial applications according to the relevant tests of JEDEC47/20/22. Device information Figure 1 Table 1 K K Pin configuration with marking (bottom view) Part information Product name / Ordering code Package Pin configuration Marking Pieces / Reel ESD129-B1-W01005 / ESD129B1W01005E6327XTSA1 WLL-2-2 K Datasheet www.infineon.com 1 line, bi-directional Please read the Important Notice and Warnings at the end of this document 15 k v2.0 2020-07-24 ESD129-B1-W01005 Bi-directional ESD protection device, 18 V (AC), 13 V (DC), 0.3 pF, 01005 Table of contents Table of contents Product description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Feature list . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Potential applications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Product validation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Device information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Table of contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1 Absolute maximum ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 2 Electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 3 Typical characteristic diagrams . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 4 Package information WLL-2-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 5 References . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 6 Revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Datasheet 2 v2.0 2020-07-24 ESD129-B1-W01005 Bi-directional ESD protection device, 18 V (AC), 13 V (DC), 0.3 pF, 01005 1 Absolute maximum ratings 1 Absolute maximum ratings Table 2 Absolute maximum ratings at TA = 25°C, unless otherwise specified Parameter Symbol Values Min. Working voltage Max. -18 +18 -13 +13 VESD (contact) -15 +15 VESD (air) -15 +15 Peak pulse power PPK – Peak pulse current IPP Operating temperature Storage temperature ESD discharge voltage VWM Unit Note or test condition V AC DC kV Discharge network: R = 330 Ω, C = 150 pF 1) 40 W -2 +2 A Stress pulse: 8/20 μs current waveform 2) Top -55 +125 °C Tstg -65 +150 Attention: Stresses above the maximum values listed here may cause permanent damage to the device. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Maximum ratings are absolute ratings. Exceeding only one of these values may cause irreversible damage to the component. 1 2 Based on IEC61000-4-2. Based on IEC61000-4-5. Datasheet 3 v2.0 2020-07-24 ESD129-B1-W01005 Bi-directional ESD protection device, 18 V (AC), 13 V (DC), 0.3 pF, 01005 2 Electrical characteristics 2 Note: Electrical characteristics TA = 25°C, unless otherwise specified. Device is electrically symmetrical. I ITLP or IPP I It Vcl Vtr Vh VWM IL IL VWM Vh Vtr Vcl V It ΔI Rdyn = ΔV ΔI ΔV ITLP or IPP Figure 2 I/V characteristic curve Table 3 I/V characteristic parameters Symbol Parameter Ih Holding current IL Leakage current IPP Peak pulse current, based on IEC61000-4-5 It Test current ITLP TLP current Rdyn Dynamic resistance Vcl Clamping voltage Vh Holding voltage Vt Test voltage Vtr Trigger voltage VWM Maximum working voltage Datasheet 4 v2.0 2020-07-24 ESD129-B1-W01005 Bi-directional ESD protection device, 18 V (AC), 13 V (DC), 0.3 pF, 01005 2 Electrical characteristics Table 4 DC characteristics Parameter Symbol Values Min. Unit Note or test condition Typ. Max. Trigger voltage 3) Vtr 19 22 25 Holding voltage Vh 13 16 19 Leakage current IL – 1 30 Table 5 Symbol Values Min. Line capacitance CL Series inductance LS Dynamic resistance 4) 5 Max. 0.15 0.3 0.5 – 0.22 – –